Operating instructions

F
Audio Dubbing []
You can add sound from audio devices (AUDIO iN) or with the built-in or an external
microphone (MIC. IN)
H C) Use only tapes recorded in SPmode 12-bk audio sound with this camcorder
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode, 16-bit or 12-bit 4-channel sound In above case, create a copy in SP
mode 12-bit audio sound using the analog linedn function
O Do not connect/dBconnect any cable to/from the camcorder while dubbing
O You cannot use the DV terminal for audio dubbing
O If you add sound to a tape not recorded with this camcorder, sound quality
may decrease.
O Sound quality may decrease when you add sound to the same scene for more
than 3 times
_n__ct_ng _ Au di De_ice
H
O Make sure that "_" is not displayed on the screen if "_" is displayed, change
the setting ([:[_ 39)
O You can monitor the picture on the LCD screen or a TV connected via the
S-video terminal, and check the sound with the built-in speaker
96