Facsimile User Guide

Sequential Broadcasting to More Than One Location
3-28
3
Sending Documents
NOTE
•You must dial the second destination within five seconds of dialing the first
destination. All subsequent destinations must be specified within 10 seconds of
each other.
• If you wait longer than the timeout interval before specifying the next destination,
the machine starts scanning the documents. The timeout interval can be turned
‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)
3 After you have specified all of the destinations, press [Start].
The machine starts scanning the first page into memory.
NOTE
• Regardless of the order you used when dialing, the machine sends the document
to the destinations you specified in this order: one-touch speed dialing numbers,
coded speed dialing numbers, access code dialing numbers, regular dialing
numbers, then redialing.
•To cancel Sequential Broadcasting, press
(Stop). After the message
<CANCEL DURING TX/RX> is displayed, press
() to cancel all destinations.
Start