Printer User Manual

Specifying Protocol Settings
2-5
Using a TCP/IP Network (Windows/UNIX)
2
4 Press [▼] or [▲] until <4.NETWORK SETTINGS> appears ➞
press [Set].
5 Press [▼] or [▲] until <1.IP ADDRESS AUTO.> appears ➞
press [Set].
6 Press [▼] or [▲] to select <AUTO> or <FIXED> ➞ press [Set].
If you select <FIXED>, proceed to step 8.
If you select <AUTO>, proceed to step 7.
7 If you selected <AUTO> in step 6, set <DHCP>, <BOOTP>, or
<RARP> to ‘ON’ or ‘OFF’.
● If you want to set DHCP to ‘ON’ or ‘OFF’:
❑
Press [▼] or [▲] until <1.DHCP> appears ➞ press [Set].
❑ Press [▼] or [▲] to select <ON> or <OFF> ➞ press [Set].
The selected mode is set.
➞
➞
➞
➞
➞
Set
Set
Set
Set
Set