Printer User Manual

Specifying Protocol Settings
2-6
Using a TCP/IP Network (Windows/UNIX)
2
● If you want to set BOOTP to ‘ON’ or ‘OFF’:
❑
Press [▼] or [▲] until <2.BOOTP> appears ➞ press [Set].
❑ Press [▼] or [▲] to select <ON> or <OFF> ➞ press [Set].
The selected mode is set.
● If you want to set RARP to ‘ON’ or ‘OFF’:
❑ Press [▼] or [▲] until <3.RARP> appears ➞ press [Set].
❑ Press [▼] or [▲] to select <ON> or <OFF> ➞ press [Set].
The selected mode is set.
To continue specifying network settings, proceed to step 9.
8 If you selected <FIXED> in step 6, set <IP ADDRESS>,
<SUBNET MASK>, and <DEFAULT GATEWAY>.
● To specify the IP address:
❑
Press [▼] or [▲] until <2.IP ADDRESS> appears ➞ press [Set].
➞
➞
➞
➞
➞
Set
Set
Set
Set
Set