Printer User Manual

Specifying Protocol Settings
2-11
Using a TCP/IP Network (Windows/UNIX)
2
2 Press [Data Registration].
3 Press [▼] or [▲] until <6.SYSTEM SETTINGS> appears ➞
press [Set].
IMPORTANT
If the prompt <PASSWORD> is displayed, enter the System Administrator’s
password using the numeric keys. For information on how to enter the System
Administrator’s password, see Chapter 4, “Restricting the Use of the Machine,” in
the Reference Guide.
4 Press [▼] or [▲] until <4.NETWORK SETTINGS> appears ➞
press [Set].
5 Press [▼] or [▲] until <8.DOMAIN NAME> appears ➞
press [Set].
6 Enter the domain name using the numeric keys ➞ press [Set].
Press to change the entry mode according to the characters you need to
enter. For more information on entering characters, see Chapter 2, “Getting
Started,” in the Reference Guide.
Example: organization
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
➞
➞
➞
➞
Data
Registration
Set
Set
Set
4
1
7
5
2
8
6
3
9
0
Set