Printer User Manual

Specifying Protocol Settings
2-18
Using a TCP/IP Network (Windows/UNIX)
2
NOTE
Depending on the operating system or LPR (Line Printer Remote) being used, it
may not be possible to specify the banner page output settings. If this occurs, you
can specify the settings for banner page output by selecting any option other than
[Auto].
8 For [IPP Print], [IPP URL], [Raw Mode Print], and [Raw Mode
Bi-direction], specify the IPP (Internet Printing Protocol) and
Raw settings.
Usually, there is no need to make changes.
9 If you are using DNS, specify the DNS settings.
❑ Enter the IP address of the DNS server in [DNS Server Address].
❑ Select [On] or [Off] for [DNS Dynamic Update] if you want the DNS server
address information to update automatically.
❑ Enter the host name of the machine in [DNS Host Name].
Input Example:sales_printer
❑ Enter the domain name belonging to the machine in [DNS Domain Name].
Input Example: sales_dept.xyz_company.co.jp
NOTE
• The machine uses DNS (Domain Name System) when the DNS dynamic update
function is set to ‘On’ in step 10).
• The DNS dynamic update function automatically registers the names specified in
[DNS Host Name] and [DNS Domain Name] in the DNS server for the machine.
• You can use this function in an environment with a DNS server that can perform
dynamic registration (dynamic DNS server).
• If using LPR to specify the DNS Host Name and DNS Domain Name settings, you
can use the machine without specifying the IP address of the machine.
10 In [SNMP Access] and [SNMP Community String], specify the
SNMP (Simple Network Management Protocol) settings.
[SNMP Access]: Select [On] or [Off] to enable SNMP operation.
[SNMP Community String]: Enter [public], [canon_admin], or [canon_user] to
define the community you want to belong to.