Printer User Manual

Setting Up a Computer for Printing
3-11
Using a NetWare Network (Windows)
3
Setting Up a Computer for Printing
After you have completed setting the NetWare print service settings and printer
protocol settings of the machine, you are ready to set up each computer on the
network for printing.
Connecting to a NetWare Network
All computers that use the printer must have NetWare client software installed, and
must be enabled for NetWare Network use. For details, see the manuals provided
with the operating system.
Installing the Printer Driver
NetSpot is software for specifying printer and network settings. To print from a
computer you must install a printer driver. (See Chapter 1, “Before You Start Using
This Machine,” in the PCL Driver Guide.) During the installation procedure, select
[Network printer] as the printer’s location, and select the print queue that you
created in “NetWare Print Service Settings,” on p. 3-3.
Printer’s Location Setting
To set the printer’s location, follow the procedure below.
NOTE
If you set up the printer’s location when you installed the printer driver, this step is not
necessary.
1 Open the printer’s Properties dialog box.
❑ On the taskbar, click [Start] ➞ point to [Settings] ➞ click [Printers].
❑ Right click the printer icon you want to use for printing.
❑ On the pop-up menu, click [Properties].
2 Specify the printer’s location.
❑ Click the [Details] tab or the [Port] tab to display the [Details] sheet or the [Port]
sheet.
NOTE
The [Port] appears on Windows 2000/XP, and the [Details] appears on Windows
95/98/Me.