Printer User Manual

NetBIOS Network Setup Procedures
4-2
Using a NetBIOS Network (Windows 95/98/Me)
4
NetBIOS Network Setup Procedures
To use a NetBIOS network, it is necessary to perform the following procedures.
IMPORTANT
• It is recommended that the Network Administrator perform step 1 above.
• The machine does not support NetBIOS over TCP/IP (NetBT). If you are using a TCP/IP
network, use the TCP/IP protocol for printing. (See Chapter 2, “Using a TCP/IP Network
(Windows/UNIX).”)
1
Connect the network cable. (See Chapter 1, “Before You Start Using This
Machine,” in the PCL Printer Guide.)
Connect the network cables in accordance to the directions specified in the PCL Printer Guide.
2
Specify the computer settings for printing.
(See “Setting Up a Computer for Printing,” on p. 4-3.)
Connect each computer you want to use for printing to a NetBIOS network, and install the printer driver
software.