User`s manual

ENGLISH

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.

Select the sub menu [Aspect setting] or [Setting] and then set up each set-

ting.

Setting up the projector

Item Description

Aspect ..................... Switches the aspect mode. (Normal, Full, 16:9, Zoom, True, Natural wide*, Custom)

There may not be available mode depending on the input mode as shown in the

table below.

Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)

Rear ........................... Sets the image left/right reversed. (ON, OFF)

Screen aspect* .. Sets the aspect. {4:3, 16:9, Default(16:10)}

Reset......................... Resets the Screen settings.

* Natural wide and Screen aspect are only available for LV-8225.

Input source

Aspect mode VIDEO PC

Normal 4 4

Full 4 4

16:9 4 4

Zoom 4 4

True * 4

Custom 4 4

✐ The mark "4" means that the available aspect mode in

the selected input source system. The error message

appears when selecting the disabled aspect mode indi-

cated with "*".

Aspect setting

This function is to adjust the aspect mode of the projector. The values in the text box rep-

resent the current aspect status.

Table of Aspect mode for LV-7290, LV-7295 and LV-7390