- Broadband Router User Manual

802.11g 4-Port Wireless LAN Broadband Router

LAN IP Address:

These fields show the LAN IP Address and the Subnet Mask as seen by others on

your Local Area Network (LAN). Most users will not need to change these values.

If you change the LAN IP Address with the DHCP server running, you'll need to restart

your client machines. If you change the LAN IP Address without the DHCP server

running, you'll need to manually reconfigure your clients' IP addresses.

WAN IP Address:

Choose either Obtain an IP Address Automatically (most users)(you can specify the

IP you want to get by filling the Pre-Request IP) or Specify an IP Address (if your ISP

assigns static IPs). If you choose the second option, type in the Wide Area Network

(WAN) IP Address, Subnet Mask, ISP Gateway Address, and DNS values. You can

obtain those information from your ISP.

PPPoE Login:

If your ISP uses Point-to-Point Protocol over Ethernet (PPPoE), choose Enable;

otherwise, choose Disable. PPPoE allows your ISP to authenticate your connection by

requiring you to submit a username and password.

Type the User Name and Password provided by your ISP in the boxes. For PPPoE

connection types, you can select either Connect on Demand or Connect Manually.

And moreover, if you want to limit the idling minutes, select Max Idle Time and type a

maximum number in minutes. Change MTU to specify the largest size for network

transmission. It is recommendated to use default value 1492.

UPNP:

Universal Plug and Play (UPnP) enable devices such as PCs, routers or other devices

to be plugged into a network and automatically know about each other.