- Broadband Router User Manual

802.11g 4-Port Wireless LAN Broadband Router

2.2 Getting Started

Please refer to the following sections of this manual for additional information about setting

up a network.

2.2.1 System Requirement

Before you getting started, make sure that you meet the following requirements.

1. An Internet connection through a cable or DSL modem

2. A computer with an Ethernet network card

3. Your Windows CD, if your computer is running Windows 95, 98, or ME

4. UTP network cable with RJ-45 connector

5. Either Microsoft Internet Explorer 4.0 (or above version) or Netscape Navigator 4.0 (or

above version)

6. For Wireless Connection, you need Wireless LAN Card / USB Adapter.

2.2.2 Before Installation

Before you start to connect your router to any network device, make sure you get the

following values from your ISP. You will need those values to setup the Router and

configure you networked PCs to accept the IP address the Router chooses to assign them.

‧ PPPoE User Name and Password or Fixed Internet IP Address assigned by your local

ISP

‧ Your Subnet Mask

‧ Your Default Gateway

‧ Your Primary DNS IP address

You are supposed to have all those information mentioned above from your ISP. If not,

contact your ISP and they will be able to supply all the information you need.