Specifications

QUANTUM WIRELESS SYSTEMS
Quantum Radio
Slave
Wireless flash sync &
wireless shutter release,
using up-to-date digital
circuitry. Coded radio
signal works indoors,
outdoors, around cor-
ners and through walls.
Range has been
extended to 350 feet.
With antenna down,
range is up to 200 feet.
Radio Slave 4i is compatible with the Radio Slave 4 and
Radio Slave 2. Be sure to match the labeled frequency
(either A, B,C, or D) with your previous units.
505SRi Set Includes: 505Si Sender, 505Ri Remote,
Belt Clip, Sync Cord, Mounting Kit, Instruction Manual
(Specify frequency only to match existing set.)
505Si Sender Includes: Sync Cord, Belt Clip,
Dead Shoe with screw (for bracket mounting)
Mounting Plate, Velcro (Specify frequency only to
match existing set.)
505Ri Remote Includes: Shoe/tripod Mount Adapter,
Pole Mount, Instruction Manual (Specify frequency only
to match existing set.)
Quantum Freewire
Create a Two-Way Link Between Your Camera, Flash
And You. Each FreeWire can be set to transmit or
receive. Four FreeWires can serve as two send/receive
systems, operating on two different Channels. Or all
FreeWires can be set on the same Channel so that
they can operate as one system - a transmitter and
three receivers.Use FreeWire’s two step motor drive
cords to keep your camera meter and focus function
continuously on (as in pressing the shutter button half
way). Your camera will be ready for instant shutter
release. Or select motor drive “delay” to command a
camera to “wake up”, focus and meter, then release
the shutter. For action sports or fast fashion shoots,
you can sequence up to 4 remote power packs, giving
each pack time to recycle. FreeWire will activate the
power packs in sequence, advancing to the next with
each shot. QUAFW10
QUANTUM POWER PACKS
Quantum TURBO Battery
High performance flash
power. Custom designed
Turbo cables connect to
many shoe and handle
mount flashes. Charger
is provided. • Power
monitor "fuel gauge"
tells you exactly how
much power remains,
Red warning light for
when power gets low.
Charging indicator gives the status of charge. • Semi-
soft, slim, comfortable case can be worn under a tuxe-
do, over your shoulder, or in your camera bag. • Size :
6.7 x 4 x 1.7 inches, Weight : 39 oz. • Battery Energy :
20 watt-hr. QUA QTB
Quantum TURBO Z Battery
The Turbo Z is ideal for the photographer who wants
portability, light weight, and the option to mount all
equipment at the camera position. Just charge the
Turbo Z right before your assignment and it's ready to
go. Weighing just 23 ounces, the Turbo Z is 33%
smaller than the Quantum Turbo Battery. Powers virtu-
ally all professional flashes. Can be mounted on a
bracket or worn on a belt. • Charges in only three
hours to full capacity. The Turbo Z uses the same bat-
tery cables as the Turbo Battery.
QUA QTZ
Quantum Bantam Battery
The Bantam powers about six 36 exposure rolls of
automatic or TTL flash (f/8 at 10ft.). (Or about 3 rolls
at full power with a GN 110 flash). That's almost 3
times as many flashes as with nicads, and twice as
many as with alkalines. Charger is provided with pack.
Specifications: • Quick Recycling: Flash recycle time is
twice as fast than new alkalines, and 3 times as fast as
with nicads. • Sealed Lead Cells: Can be recharged to
give over 50,000 shots typically over it's lifetime. (The
internal cells can be replaced easily and economically,
if necessary, for another 50,000). Recharge fully at any
time, without fear of developing a "memory". Will hold
its charge for months when not in use • LED Displays:
Power monitor "fuel gauge", and charge status indica-
tors. • Mounts directly onto camera tripod socket for
quick action shooting, onto a bracket, or even directly
to a roving flash • Size : 3 x 4 x 1.2 inches Weight : 14
oz. • Battery Energy : 7.2 watt-hr.
QUABB
Quantum QB1C
Battery
Features: • Lighter,
smaller and more con-
venient. Attaches to tri-
pod socket on bottom of
camera.
• "Fuel Gauge" displays
power remaining and
charging level. Energy
saver mode dims lights
for longer shoots • "No-
memory" nickel metal hydride cells charge reliably in 3-
4 hours • Outputs for both short (Bantam "X" series)
and long (QB1/1+ "M" series) cords • Four to six times
the power of typical rechargeable. Enough for about
240 shots with a Nikon 950 digital camera, 800 shots
with Kodak 265, or 400 shots with Olympus 620L.
(With the LCD off) • Recycling speed is three times as
fast as alkalines and a third faster than nicads •
Battery Energy : 9.5 watt-hr. • Size : 5 x 2.25 x 1.625
inches, Weight : 12 oz. QB1C
Quantum QB1+ Battery
The Quantum Battery 1+ provides several hundred full
power flashes and fast, consistent recycling for most 6
volt flash units. Specially designed modules fit into the
flash battery compartment to replace unpredictable
nicads or alkalines. 50% faster recycling, and consis-
tently fast even as battery charge is depleted. 250+
full power manual shots, and 1000+ automatic shots
per charge. Specifications: • LED Displays:
Power monitor "fuel gauge", on/off, and charge sta-
tus/complete indicators. Easily monitor your units' con-
dition • Sealed Lead Cells: Recharge fully at any time,
without fear of developing a "memory".
The pack holds its charge for months when not in use.
Charger is provided • Charges fully in 3 - 10 hours with
standard charger. • Twin Output Jacks: Allows two
flashes to be powered together. • Safety Features:
Electronic circuit breaker prevents damage to flash or
battery. • Automatically shuts itself off, and cannot be
turned on without a module plugged in, preventing
accidental drain of the cells. • Size : 3.7 x 4.2 x 1.7
inches , Weight : 26 oz. Battery Energy : 15 watt-hr.
QB1+
Quantum QB2 Battery
The Quantum Battery 2 provides hundreds of full
power flashes and fast, consistent recycling for many 9
volt flash units. Features: • Uses modules specially
designed to fit into the flash battery compartment to
replace unpredictable nicads or alkalines • 50% faster
recycling, and consistently fast even as battery charge
is depleted • 250+ full power manual shots, and
1000+ automatic shots per charge. • LED Displays:
Power monitor "fuel gauge" On/Off, Short Circuit , and
Recharging indicators. Easily monitor your units' condi-
tion. • Sealed Lead Cells: Recharge fully at any time,
without developing a "memory". • Twin Output Jacks:
Allows two flashes to be powered together.
QB2
Quantum QB5+ Battery
The Quantum Battery 5+ is a new, improved replace-
ment for the Quantum Battery 5 supplying 50% more
power to the following Digital Cameras: Kodak 410,
420, 460 and Canon EOS 1, 3, 5. • Sealed Lead Cells:
Recharge fully at any time, without developing a
"memory". • Fast charging -- 3-4 hours from full dis-
charge. Charger is provided. • LED displays:
Power monitor "fuel gauge", On/Off, and Recharging
indicators easily monitor your units' condition. • Twin
output jacks: Allows you to power two digital cameras
simultaneously. Cost effective pack can be recharged
hundreds of times, with consistent performance. Saves
$1000's of dollars over alkaline or lithium cells. • The
Quantum Battery 5+ uses the same "DCK" power cable
as QB5 to supply power to the digital camera. • Size :
2 x 4.9 x 6.4 inches, QUAQB5+
Quantum QPAQ Battery
A High Energy, Modular Power Pack For The Qflash
X/X2. Qpaq-X is Quantum's modular portable flash sys-
tem. Connect two Qflash X Series heads for a maxi-
mum of 400 w/s per flash. Flash power is controlled
from both the Qpaq-X and Qflash. The Qpaq-X is pow-
ered by replaceable, rechargeable battery modules.
Select either small or large battery modules to fit the
needs of your assignment. Connect an optional AC
module for studio use. • 200/400/600/800 w/s. Use
add-on 200 w/s modules and get up to 800 w/s of
power. (400 w/s per flash head maximum.) • The
Qpaq-X "Fuel Gauge" indicators keep you informed of
the battery's remaining capacity at all times. • At 200
w/s the Qpaq-X normal recycle speed is 3.2 seconds.
Ultra recycle speed is 1.8 seconds.
QUANTUM FLASHES
Quantum QFT2 Flash
The Qflash Model T2 is powered by the Quantum
Turbo or Turbo Z Battery for GN 160 (ISO 100) auto
flash power. Qflash
uses parabolic reflectors
for softer, cleaner light.
The reflectors are
removable for bare-bulb
lighting. The flash head
bounces and swivels.
Flash control is either
automatic, TTL (with
optional adapters),
manual, or stroboscopic.
Automatic exposure
control covers a nine
stop range, adjustable
every 1/3 stop, for a
total of 25 automatic
settings! Manual power can be adjusted from full to
1/64 power in 1/3 stop increments.
Quantum QFX2 Flash
The Qflash Model X2 can be powered by the new
Qpaq-X. It can also be powered by a Lumedyne or
Norman pack, for up to 400 watt-seconds (GN 220,
ISO 100) auto flash power.
Qflash uses parabolic reflectors for softer, cleaner
light. The reflectors are removable for bare-bulb light-
ing. The flash head bounces and swivels. Flash control
is either automatic, TTL (with optional adapters), man-
ual, or stroboscopic. Automatic exposure control covers
a nine stop range, adjustable every 1/3 stop, for a
total of 25 automatic settings! Manual power can be
adjusted from full to 1/64 power in 1/3 stop incre-
ments.
Qflashes can be ganged together to produce flexi-
ble lighting setups with thousands of watt-seconds of
automatic or manual flash power. Qflash mounts on a
camera bracket, tripod, or light stand and weighs no
more than a conventional flash.
Visit us at: www.berger-bros.com
27
photo accessories / quantom