Specifications

Visit us at: www.berger-bros.com
underwater / ikelite / ewa-marine
51
Ikelite Housing
For SLR Autofocus Cameras
Most cameras are installed in this very compact hous-
ing. The body is molded of clear polycarbonate provid-
ing the "Clearly Superior" advantages and excellent
corrosion resistance. The back is molded in black to
provide brighter viewing by shielding the viewfinder.
The overall dimensions are 11" wide x 8" high. Front-
to-back measures 5.5" plus port. Width is 14.5" with
the removable handle bar attached. The housing with
handle assembly and port weighs less than 8 pounds.
For Nikon Cameras
All Ikelite housings for
Nikon cameras include a
hotshoe connection and
housing bulkhead to
allow addition of Ikelite
Substrobes. All TTL
Substrobes are compati-
ble with the Nikon TTL
system. All housings
provide aperture and zoom control, or focus control for
manual lenses. A special Focus Port (IKE 5508.05) is
available specifically for the 105mm D Micro Nikkor
lens, allowing manual focus of this lens without attach-
ing any focus clamps and allows switching from manu-
al to auto focus with this lens while underwater.
A
vailable for the following models:
NIKON N90, N90s, F90, F90s, F90x IKE6729.1
NIKON N80, F80 IKE6728.8
NIKON N70, F70 IKE6727
NIKON N65, F65 IKE6726.5
NIKON N60, N60-QD, F60 IKE6726.1
NIKON N8008, N8008s, F801, F801s IKE6728.1
NIKON N6006, F601 IKE6726
NIKON N50, F50 IKE6725
NIKON F100 IKE6710
For Canon Cameras
All Ikelite housings for Canon cameras include a hot-
shoe connection and a housing bulkhead to allow addi-
tion of Ikelite Substrobes. All TTL Substrobes are com-
patible with the Canon TTL system, but do not indicate
under exposure with the camera ready light. All
housings provide aperture and zoom control, or focus
control for manual lenses. The Canon "eye movement"
sensing does not operate in a housing, but the superb
Canon auto-focus system is just as impressive under-
water. Housing does not include port.
A
vailable for the following models:
EOS Elan 7, 7e, 30, 33 IKE6777.7
EOS Elan II, IIe, 100II, 55, 50e IKE6777
EOS Elan, 100 IKE6776
EOS A2, A2e, 5 IKE6775
EOS 10, 10S IKE6771
EOS REBEL G, GQD, X, XS, 500, 500N, 500NQD
IKE6773
EOS REBEL 2000, 2000-Date, 300 IKE6773-2
EOS REBEL 2, 2S, 1000, 1000F, 1000N, 1000FN
IKE6772
EOS 600, 620, 630, 650 IKE6770
For Minolta Cameras
All Ikelite housings for the Minolta cameras include a
hotshoe connection and a housing bulkhead to allow
addition of Ikelite Substrobes. All TTL Substrobes are
compatible with the Minolta TTL system. Under-expo-
sure warning is also signaled by the strobe. All hous-
ings provide aperture and zoom control, or focus con-
trol for manual lenses. Minolta was a pioneer in auto-
focus slr cameras, and these cameras prove very capa-
ble underwater. Housing does not include port.
A
vailable for the following models:
MAXXUM 7000 IKE6767
MAXXUM 7000i IKE6767.1
MAXXUM 700si IKE6767.2
MAXXUM 7xi IKE6767.7
Ikelite Auto 35 MD System
The Auto 35 sys-
tem provides very
good underwater
photographs auto-
matically.
Compact, light-
weight and trou-
ble free, complete
with a full frame
motor drive 35mm
camera at a real-
istic price. This is a well designed rugged system, not
just a colorful "point and shoot" camera. Compact and
lightweight, the Auto 35 features a built-in hand grip
with lanyard, accessory shoes, and sportsfinder for
easy framing. Safe operation to 38m (125').
IKE 5464
Ikelight Pro Video-lite II
The Pro Video-Lite series combines exceptionally even
lighting coverage with a compact design that attaches
easily, and provides exceptional handling while adding
very little weight to the housing underwater. The ultra
compact lite head is offered with 100 watt or 50 watt
primary video lamps, and includes a separate 20 watt
modeling/diving light. The ultra-wide 100 degree pri-
mary light coverage is free of any hot-spots. The
unique battery pack from the SpD light series snaps
underneath any Ikelite video case with a quick-release
toggle system, replacing the removable housing base.
The battery pack weighs less than one pound under-
water, and mounting it beneath the housing provides
better handling than a self-contained system on the
end of an arm. A on/off unique switch is mounted in
the cord that connects the battery pack and lite head.
This switch mounts on the housing handle for conven-
ient finger-tip operation without removing your hand
from the handle.
IKE 6340.05 / IKE 6340.06
Ikelite DS-50 Strobe
This new model evolves from the
famous SubStrobe 50 but fea-
tures completely revised elec-
tronic circuitry for use with the
newest cameras, providing both
TTL compatibility and the ability
to also provide pre-flashes when
combined with Ikelite Remote
TTL Sensors. A full 50 watt-sec-
onds of electrical power in a
compact size with coverage ade-
quate for lenses as wide as
28mm. Combine several of this
class strobe to cover very wide
angle lenses with minimal illumi-
nation of particles suspended in
the water. The DS-50 was creat-
ed especially for use with new
digital cameras, but is complete-
ly compatible with all film cam-
eras including the Nikonos and all new Nikon systems.
Optional remote TTL Sensor is available at an addition-
al cost.
Strobe only: IKE4044
Remote TTL Sensor: IKE4100.5
Ikelite 0561.2 Substrobe Diffuser
This new accessory softens and diffuses the light,
reducing output by one f/stop.Snaps onto the front of
current SubStrobe 50 models, and is included now
with the SubStrobe A35 for the Auto 35 system.
IKE0561.2
Ikelite Strobe Arm System
Strobe Arm system attaches and removes with a
touch of the Release Handle button. The wireless TTL
Slave Sensor maintains its aim at the camera while
adjusting the strobe. The arm can also be attached
under the wing nut of our digital housings that utilize
an aluminum handle. The TTL Slave Sensor mounts
under the strobe in this situation. IKE4075.1
Digital Package 3944.40:
Strobe, diffuser (IKE0561.2)
Slave Sensor and Strobe Arm system (IKE4075.1)
IKE3944.40
Digital Package 3944.41:
Strobe, diffuser (IKE0561.2)
TTL Sync Cord (IKE4103) and Strobe Arm system
(IKE4075.1) IKE3944.41
Ikelite DS-125 Strobe
The SubStrobe DS-125 features special electronic cir-
cuitry for use with the newest cameras, providing
both TTL capability and the ability to also provide
pre-flashes when used with Ikelite Wireless TTL Slave
Sensors. The DS-125 was created especially for use
with new digital cameras, but is completely compati-
ble with current film cameras including the Nikonos
and all of the newest Nikon systems.
Specifications:
• Full power recycle time of 1 sec-
ond • TTL, Full, 1/2, 1/4, 1/8 powers • Fuel Gauge •
Modeling Light • Audible Ready Signal • 90 degree
angle of coverage • Diffuser to cover 100 degrees •
1.5 hour Smart Charger available • 150 flashes per
charge • Charger not included • Interchangeable
NiCad battery pack • Guide # 32 underwater (ISO
100) IKE 4065
Digital Package 3944.65
DS-125 SubStrobe with diffuser, TTL Slave Sensor
(IKE4100.5) Strobe Arm system (IKE4075.1)
110/220v 6-hour charger (IKE0083.9)
IKE3944.65
Digital Package 3944.66
DS-125 SubStrobe with diffuser, TTL Sync Cord
(IKE4103) Strobe Arm system (IKE4075.1)
110/220v 6-hour charger (IKE0083.9)
IKE3944.66
Ikelite Digital Light Meter
Unique Digital Exposure Meter
that provides accurate readings
for both ambient light and flash
photography. This is a complete-
ly new compact amphibious
design for use above water or
200 feet underwater. Two sen-
sors provide maximum capability.
One sensor monitors a water
contact incident light sphere; or
choose the direct reading sensor
on the opposite side that covers about ten degrees.
The size is comparable to digital meters intended for
use only above water. It is 1.375" thick, less than 3"
wide, and less than 5" high including the mounting
and lanyard loops. Bracket is included for attachment
to most Ikelite handles.
The meter automatically shuts down after about five
minutes if not in use, or can be locked on for continu-
ous operation. Memory feature retains all settings
(ISO film speed, exposure compensation, etc.) when
the meter is turned off or the battery is changed.
IKE 4200