Brochure
72
usa.canon.com/eos
73
EOS SYSTEM ACCESSORIES
72
EF 400mm f/4 DO IS II USM • f/4.5 • 1/400 sec.
Viewfinder Accessories
For more customization, many of Canon’s EOS cameras are compatible
with a vast choice of eyecups, diopter lenses and more for greater
versatility in a number of shooting situations.
Anti-Fog
Eyepiece Ec
Anti-Fog
Eyepiece Ed
Dioptric Adjustment
Lens E
Dioptric Adjustment
Lens Ed
Dioptric Adjustment
Lens Eg
Eyepiece Extender
EP-EX15 II
Eyepiece Extender
EP-EX15 Angle Finder C Eyecup Ed-E
Compatibility
EOS-1Ds Mark II,
1Ds, 1D Mark II N,
1D Mark II, 1D,
D2000, 1v HS, 1v, 1N
RS, 1N, 1
EOS-3, A2/A2E,
ELAN 7 series,
ELAN II/IIE
All EOS SLR cameras
except: EOS Mark III
series, EOS-3, A2/A2
E
,
ELAN 7 series,
ELAN II/IIE, IX, IX Lite
EOS-3, A2/A2E,
ELAN 7 series,
ELAN II/IIE
EOS-1D X, 1D Mark IV,
1Ds Mark III,
1D Mark III,
5D Mark III,
7D Mark II, 7D
EOS 5D Mark II, 70D
60D, 60Da, 50D,
40D,
Rebel T5i, T4i, SL1,
T3i, T5, T3, T2i, T1i,
XSi, XS
All EOS SLR cameras
except: 1Ds Mark III,
1D Mark III, 6D, 5D
Mark II, 60D, 60Da,
50D, 40D, EOS-3, A2/
A2E, ELAN 7 series,
ELAN II/IIE, IX, IX Lite
All EOS SLR cameras
(Includes Adapter
Ec-C and Ed-C to fit
any EOS camera.)
EOS-3, A2/A2E,
ELAN 7 series,
ELAN II/IIE
Description
These eyecups use specially treated
advanced-process glass, which helps to
prevent condensation, or fogging. The
eyecups are useful in warm, humid and cold
weather, when fogging is most likely to occur.
Note: EOS-1Ds Mark III, EOS-1D Mark III and EOS 7D use
Anti-fog Eyepiece Eg only.
These Dioptric Adjustment lenses provide near- and far-sighted
users a clear viewfinder image without the use of eyeglasses.
Available in versions from +3 to -4 dpt to match many types of
eyesight, each Dioptric Adjustment Lens fits into the eyepiece
holders of the appropriate EOS model for convenient use and a
comfortable fit.
Note: EOS-1Ds Mark III and EOS-1D Mark III require Dioptric Adjustment Lens Eg only.
Extends the eyepiece 5/8" (15mm) from the
camera body and reduces viewfinder
magnification by 30%. Useful for eyeglass
wearers and others to keep the tip of the nose
from touching the camera body.
Angle Finder C lets
users adjust the
viewing angle while
providing a 2.5x
magnification for
critical focusing, or
a full-screen image
(1.25x) that includes
exposure data.
Provided with built-in
dioptric adjustment
for variations in
eyesight.
This large eyecup
keeps out most
sunlight and other
external light,
substantially
enhancing viewfinder
visibility. It is
especially helpful
for eyeglass wearers
when photographing
outdoors. The mount
can be rotated for
vertical shots.
Eyecup Eb Eyecup Ec-II Eyecup Ed Eyecup Ef Eyecup Eg Rubber Frame Eb* Rubber Frame Ec* Rubber Frame Ef*
Compatibility
EOS ELAN, Rebel series**,
700, 750, 850, 6D, 5D
Mark II, 5D, 70D, 60D,
60Da, 50D, 40D, 30D,
20D, 20Da, 10D, D60,
D30
EOS-
1Ds Mark II, 1Ds,
1D Mark II N,1D Mark II,
1D, D2000, 1v HS, 1v,
1N RS, 1N, 1
EOS-3, A2/A2E,
ELAN 7 series,
ELAN II/IIE
EOS Rebel T5i, T4i, SL1,
T3i, T5, T3, T2i, T1i, XSi,
XS, Digital Rebel XTi/XT,
EOS Digital Rebel,
Rebel T2, Ti, K2
EOS-1D X, 1D Mark IV,
1Ds Mark III, 1D Mark III,
5D Mark III, 7D Mark II,
7D
EOS 10S, ELAN, 6D
5D Mark II, 5D, 70D,
60D, 60Da, 50D, 40D,
30D, 20D, 20Da, 10D,
D60, D30, Rebel series**
EOS-1Ds Mark II, 1Ds,
1D Mark II N, 1D Mark II,
1D, D2000, 1v HS, 1v,
1N RS, 1N, 1
EOS Rebel T5i, T4i, SL1,
T3i, T5, T3, T2i, T1i, XSi,
XS, XTi, XT, Digital Rebel,
Rebel T2, Ti, K2
Eyecups, Rubber Frames and Dioptric Adjustment Lenses
Focusing Screens Eh Series
Focusing Screen Sets for 4x5 and Square Formats Focusing Screens Ee Series
Focusing Screens Eg Series
* Used with Dioptric Adjustment Lens E. ** Except Digital Rebel, Rebel T2, Ti and Rebel K2
Eh-A: Eh-S:
Eg-A II:
Eg-A: Eg-D: Eg-S:
Compatibility
EOS 7D Mark II EOS 6D EOS 5D Mark II EOS 6D, 5D Mark II
Description
Standard focus screen exclusively
for the EOS 7D Mark II. Bright
and easy to distinguish focus.
For general photography with
all lenses.
The Super Precision Matte
screen obtains sharp points of
focus when using bright lenses
with a maximum f/2.8 or higher
aperture. The finer microlens
structure provides optimum
focusing for various scenes.
Standard focus screen
exclusively for the EOS 6D.
Bright and easy to distinguish
focus. For general photography
with all lenses.
Standard focus screen
exclusively for the
EOS 5D Mark II. Matte surface
with nine AF points etched on
screen. For general photography
with all lenses.
Similar to standard Eg-A screen
for EOS 5D Mark II, but with
horizontal and vertical lines for
precise subject placement or
alignment. EOS 5D must
be set to Custom Function IV-5-1
for accurate exposure metering.
An all-matte focus screen for
the EOS 5D Mark II with finer
microlens structure than the
standard screens. Out-of-focus
areas show more vividly than
with EG-A and EG-D screens.
EOS 5D Mark II must be set
to Custom Function IV-5-2 for
accurate exposure metering.
Ec-1Ds/Ec-1D/Ee: Crop Lines Ec-1Ds/Ec-1D/Ee: Black Mask Ee-A: Precision Matte
Ee-D: Precision Matte
with Grid Lines Ee-S: Super-Precision Matte
Compatibility
EOS-1D X
††
, 1D Mark IV, 1Ds/1D Mark III, 1Ds/1D Mark II, 1Ds/1D EOS 5D
Description
Ideal for the portrait and wedding photographer, the set “Crop Lines” includes
two focus screens—one with 4x5 (or 8x10) crop lines etched on the screen, and a
second screen with lines for square composition. All exposure metering can be
performed normally in camera, and red focus point illumination remains fully
active. The other sets “Black Mask” have and opaque black mask outside the
picture area. One screen of the set shows the area for 4x5 (or 8x10) cropping, the
other shows the area for square cropping. Partial or Spot metering is recommended
for these screens. E-TTL II flash exposure will definitely require significant
compensation. FEL (Flash Exposure Lock) in conjunction with either partial or spot
metering is recommended. 3 types are available for both sets respectively,
according to the size of the CMOS sensor and viewfinder optics: for full frame 1Ds
series* and 1D series.
* Can also be attached to 35mm EOS-1 series and EOS-3 cameras.
Replacement standard focus screen
exclusively for the EOS 5D. Matte surface
with nine AF points etched on screen. For
general photography with all lenses.
Similar to standard Ee-A screen for
EOS 5D, but with horizontal and vertical
lines for precise subject placement or
alignment. Overall matte surface gives
viewing and focusing very similar to
standard Ee-A screen. EOS 5D must be
set to Custom Function 00-1 for accurate
exposure metering.
An all-matte focus screen for the
EOS 5D with finer microlens structure
than the standard screens. Out-of-focus
areas show more vividly than with Ee-A
and Ee-D screens. It works best with
lenses from f/1.8 to f/2.8 max aperture,
especially for manual focusing. EOS 5D
must be set to Custom Function 00-2 for
accurate exposure metering.
Ec-D: Laser-Matte
with Sections
Ec-H: Laser-Matte
with Scale
Ec-l: Laser-Matte with
Double Cross-Hair Reticle
Ec-L: Cross-Split Image Ec-N: Laser-Matte Ec-R: Laser-Matte
Ec-S: Super Precision
Matte
†
Compatibility
EOS-1D X
††
, All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1N, 1N RS, EOS-1 and EOS-3
Description
This is a matte field screen
with sections. Grid lines
assist in determining
accurate picture composition.
It is especially well suited for
close-up photography or for
copy work using EF macro
lenses, it can also be used
for general photography with
all lenses.
A matte field screen with
vertical and horizontal scales
marked in millimeters, this
screen is effective for
close-up photography and
photo-micrography. Useful
in determining magnification
ratios and composition, this
screen can be used with all
lenses.
This is a matte field screen
with a clear center spot
containing a double
cross-hair reticule.
Focusing is possible using
the floating image of the
central cross hair. This
screen is particularly useful
for photomicrography
and astrophotography.
Surrounding matte field can
be used with all lenses.
This matte field screen has
a cross-split image in the
center, which divides the
subject in half both vertically
and horizontally for accurate
manual focusing. Used for
general photography with
all lenses, best results are
obtained when using a lens
of f/5.6 or faster.
This is the standard screen
for the EOS-3. The outer
oval-shape the 45 AF points;
the inner circle is for spot
and FEL metering. When
shooting, the focusing
points will be indicated in
red LCD markings. Along
with the Ec-R screen, it is
approximately 1/2 stop
brighter than the Laser-
Matte series screens.
This is the standard screen
provided with the
EOS-1N RS. It compensates
for decreased viewfinder
brightness due to the low
reflection factor of the
pellicle mirror. It is about
1/2-stop brighter but
otherwise similar to Focusing
Screen Ec-CII. It can be used
in all EOS-1 series cameras,
as well as the EOS-3.
An all-matte focus screen for
the EOS-1D Mark II N with
finer microlens structure
than the standard screens.
Out-of-focus areas show
more vividly than with the
other Ec type screens. Ideal
for fast lenses (f/1.8 through
f/2.8 max aperture).
Focusing Screens Ef Series Focusing Screens Ec Series
Note: All focusing screens include a special tool for removing original screen and installing new screen. EOS-1Ds, EOS-1D Mark II, EOS-1D, EOS-1v HS and EOS-1v—If using New Laser Matte Focus Screens Ec-N or
Ec-R, be sure to set camera’s Custom Function C.Fn-0 to “0”. EOS-3—If using Laser Matte Ec-A, Ec-B, Ec-C II, Ec-C III, Ec-D, Ec-I or Ec-L focus screens, be sure to set camera’s Custom Function C.Fn-0 to “1”.
Exposure compensation is required when combining the focusing screen Ec-R with the EOS-1 or EOS-1
N, and when combining the focusing screens Ec-A, B, Cll, D, H, I and L with the EOS-1N RS. Refer to each
focusing screen’s instructions for detailed information.
†
EOS-1Ds Mark III, 1D Mark III and 1D Mark II N must be set to appropriate Custom Function for accurate exposure metering when this screen is installed.
Manual exposure is required for use with other EOS-1 series cameras.
††
For the EOS-1D X, by changing the Focusing Screen Custom Function setting, the camera can be compatible with the Laser Matte
focusing screens: Ec-A, B, D, H, I, and L. The Ec-C IV and Ec-C, CII, CIII, S, N, and R focusing screens can also be installed, but since there is no Focusing Screen Custom Function setting for them, you must set
exposure compensation as you shoot.
Ef-A: Ef-D: Ef-S: Ec-A: Microprism Ec-B: Split Ec-C III: Laser-Matte Ec-C IV: Laser-Matte
Compatibility
EOS 60D, 60Da, 50D, 40D EOS-1D X
††
, All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1N, 1N RS, EOS-1 and EOS-3
Description
The standard focus screen
for EOS 40D. Standard
Precision Matte surface,
ideal with most lenses
including zooms f/3.5 thru
f/5.6. All matte surface.
Includes a special tool to
remove existing screen.
Precision Matte surface,
with etched grid lines to
assist composition. The EOS
40D’s AF points remain fully
visible. Focus characteristics
suited to most lenses.
Exclusively for the EOS 40D,
this focus screen is
optimized for wide-aperture
lenses from f/1.8 to f/2.8.
Areas that are slightly out
of focus appear more out of
focus, making it easier to tell
when focus is right-on. Ideal
for users who frequently
manually-focus in dim light
with fast lenses.
This matte field screen with
microprism focusing spot
in the center is used for
general photography with
all lenses. It achieves best
results when using a lens
of f/5.6 or faster.
This matte field screen with
split-image focusing spot in
the center is good for general
photography with all lenses.
Standard on the EOS-1D
series, EOS-1v HS/EOS-1v,
and compatible with all EF
lenses, this screen includes
an Area AF ellipse and spot
metering circle. Manual
focus can be checked
anywhere on the screen.
This Laser Matte Ec-C IV uses
a shaping method improved
over the Ec-C III. It achieves
easier focusing and good
background blur. brighter,
less grainy, and better
balanced.