PUB.
Introduction Important Usage Instructions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
Important Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Trademark Acknowledgements • • • • • • • • • • • • • • • • • • • C Y P O SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store, iPad, iPhone, iPod, iTunes and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Highlights of the XA25 / XA20 The Canon XA25 / XA20 HD Camcorder is a high-performance camcorder whose compact size makes it ideal in a variety of situations. The following are just some of the many functions featured in the camcorder. HD Recording Manual controls at your fingertips HD CMOS PRO sensor and DIGIC DV 4 processor The camcorder is equipped with a 1/2.84-inch CMOS sensor that captures video at an effective pixel count of approximately 2.91 megapixels (2136x1362).
Other Features OLED screen and LCD viewfinder Versatile audio connectivity You can use the built-in microphone, MIC audio input terminal or the two INPUT terminals when recording. When using the INPUT terminals, you can even use microphones that require phantom power. Audio scene select With the audio scene select function (A 81), you can optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings.
Enjoying your Recordings on Other Devices Connect the camcorder to an external monitor (A 107). Copy your recordings to an external video recorder (A 119). 7 Save your recordings (A 114). Y P O Enjoying Your Recordings Using the Camcorder's Wi-Fi Functions C Use your iOS or Android device to remotely control the camcorder and view the image on its screen (A 124). Use the Web browser on your iOS or Android device to view the recordings on the camcorder (A 130).
Table of contents 1 Introduction 11 3 Recording 40 About this Manual 11 Conventions Used in this Manual 11 Supplied Accessories 13 Names of Parts 14 8 2 Preparations 21 Attaching the Ferrite Core 21 Charging the Battery Pack 21 Preparing the Camcorder 24 Attaching the Microphone Holder Unit 24 Attaching the Handle Unit 24 Using the Lens Hood and Lens Cap 25 Using the Viewfinder 25 Adjusting the OLED Screen 26 Grip Belt and Straps 27 Wireless Controller 28 Using a Tripod 29 Basic Operation of the Camcor
Recording Audio 79 Recording Audio to Channel 1 (CH1) 79 Connecting an External Microphone or External Audio Input Source to the Camcorder 80 Using the Built-in Microphone or an External Microphone Connected to the MIC Terminal 80 Audio Scenes and Other Audio Settings 81 Audio Recording Level 82 Wind Screen (Built-in Microphone) 83 Microphone Attenuator (Built-in Microphone) 83 Audio Equalizer (Built-in Microphone) 84 Microphone Directionality (Built-in Microphone) 84 Switching the Input (MIC Terminal) 85 M
8 Saving/Sharing Recordings 114 10 10 Additional Information 142 Saving Recordings to a Computer 114 Connection Diagram 114 Saving Movies Using Data Import Utility 114 Copying Recordings Between Memory Cards 116 Copying Scenes from the Movie Index Screen 116 Copying a Single Photo 116 Copying Photos from the Index Screen 117 Converting Movies to MP4 Format 118 Copying Recordings to an External Video Recorder 119 In High Definition 119 In Standard Definition 119 9 Wi-Fi Functions 121 Y P O Introduction
1 About this Manual Introduction Introduction About this Manual Thank you for purchasing the Canon XA25 / XA20. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 156). Conventions Used in this Manual • IMPORTANT: Precautions related to the camcorder’s operation. • NOTES: Additional topics that complement the basic operating procedures.
About this Manual 12 The three sets of icons indicate the operating mode and whether a function is available in that mode. : Indicates the movie format. For details, refer to Selecting the Movie Format (AVCHD/MP4) (A 39). : Indicates whether the camcorder is in shooting (CAMERA) or playback (MEDIA) mode. In this example, the function is available only in mode. For details, refer to Turning the Camcorder On and Off (A 30). : Indicates the shooting mode.
Supplied Accessories Supplied Accessories The following accessories are supplied with the camcorder: 13 CA-570 Compact Power Adapter (incl. power cord and ferrite core) BP-820 Battery Pack Handle unit (incl. screws) WL-D89 Wireless Controller (incl. CR2025 lithium button battery) STV-250N Stereo Video Cable Lens cap C Microphone holder unit (incl.
Names of Parts Names of Parts Left side view 14 2 3 1 4 5 1 2 3 4 5 6 7 6 7 8 C Y P O Lens barrier switch (A 40) Memory card slot 2 (A 38) Memory card slot 3 (A 38) u (review recording) button (A 46)/ Assignable button 5 (A 97) Lens hood (A 25) Focus/Zoom ring (A 54, 59) CUSTOM (customizable) dial (A 96) 9 8 10 11 CUSTOM (customizable) button (A 96) 9 INFRARED switch (A 94) 10 Double memory card slot cover 11 DISP. (onscreen display) button (A 93)/BATT.
Names of Parts Right side view 1 15 8 1 2 3 4 9 10 C Built-in speaker (A 101) MIC terminal (A 81) HDMI OUT terminal (A 107, 108) REMOTE terminal For connecting commercially available remote controllers.
Names of Parts Front view 16 1 Back view 8 6 7 2 3 4 5 1 2 3 4 5 6 7 C Instant AF sensor (A 55, 172) Remote sensor (A 28) Illumination sensor (A 150) AF/MF button (A 54)/ Assignable button 1 (A 97) PRE REC (pre-recording) button (A 92)/ Assignable button 2 (A 97) OLED touch screen (A 26, 31) Focus/Zoom ring switch (A 59) Y P O 12 13 14 8 9 10 11 12 13 14 15 16 9 10 11 15 16 Viewfinder (A 25) Dioptric adjustment lever (A 25) Joystick (A 32)/SET button (A 32) Strap mount (A 27) Assignable butto
Names of Parts Top view 1 2 3 4 5 17 2 6 1 2 3 4 5 C Built-in stereo microphone (A 79) Handle attachment unit (A 24) Mode switch (A 31) Zoom rocker (A 59) ACCESS indicator (A 40) 7 Y P O 6 7 Power switch (A 30) POWER / CHG (battery charging) indicator (A 21)
Names of Parts Bottom view 18 1 1 2 3 C Tripod socket (A 29) BATTERY RELEASE switch (A 22) Eye cup (A 25) 2 Y P O 3
Names of Parts Handle unit 2 3 4 5 6 7 8 9 10 19 1 11 1 2 3 4 5 6 7 8 12 13 14 C Microphone holder unit (A 79) Microphone lock screw (A 79) Accessory shoe Cold shoe for attaching accessories.
Names of Parts WL-D89 Wireless Controller 7 20 1 2 3 8 4 5 9 10 6 1 2 3 4 5 6 7 8 9 10 Y P O START/STOP button (A 40) G (mode selection) button (A 100) MENU button (A 34, 143) DISP.
2 Attaching the Ferrite Core Preparations Preparations Attaching the Ferrite Core Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder. Attaching the ferrite core to the compact power adapter cable is necessary to suppress RF interference. Attach the ferrite core to the cable about 6 cm (2.4 in.) from the plug end (the plug to be connected to the camcorder) of the compact power adapter cable.
Charging the Battery Pack 5 Charging will start when the camcorder is turned off. 22 POWER/CHG (battery charging) indicator • If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging). The red POWER/CHG indicator will go out when the battery pack is fully charged. • If the indicator flashes, refer to Troubleshooting (A 158).
Charging the Battery Pack • Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge. • The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is completely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately. • We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Preparing the Camcorder Preparing the Camcorder This section covers the basic preparations for the camcorder such as attaching the handle unit and lens hood, and adjusting the viewfinder and OLED screen. When attaching the lens hood, grip belt and straps, be careful not to drop the camcorder by placing it on a table or other stable surface. 24 Attaching the Microphone Holder Unit Use the supplied screws to attach the microphone holder unit to the handle unit.
Preparing the Camcorder Using the Lens Hood and Lens Cap While recording, the supplied lens hood with lens barrier is effective for reducing stray light that can be the cause of lens flare and ghost images. Additionally, closing the lens barrier can help prevent fingerprints and dirt accumulation on the lens. Use the supplied lens cap when carrying the camcorder or storing it after use. 25 * Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously. 1 Remove the lens cap.
Preparing the Camcorder • If you wear glasses, you may find the viewfinder easier to use if you flip back the outer edge of the eye cup toward the camcorder body. 26 NOTES • Make sure you keep the eye cup attached when using the camcorder. • For details about how to take care of the viewfinder, refer to Handling Precautions (A 168), Cleaning (A 172). Adjusting the OLED Screen Open the OLED panel 90 degrees. • You can rotate the panel 90 degrees downward.
Preparing the Camcorder • About the OLED and viewfinder screens: The screens are produced using extremely highprecision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black dots. Misfired pixels in the viewfinder may appear instead as white dots. This has no effect on the recorded image and does not constitute a malfunction. Grip Belt and Straps 27 Fasten the grip belt.
Preparing the Camcorder Attaching an optional shoulder strap Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap. 28 Wireless Controller Y P O First, insert the supplied CR2025 lithium button battery into the wireless controller. 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder.
Preparing the Camcorder NOTES • When the camcorder cannot be operated with the wireless controller, or when it can only be operated at very close range, replace the battery. • The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. 29 Using a Tripod You can mount the camcorder on a tripod but do not use tripods with mounting screws longer than 6.5 mm (0.26 in.) as this may cause damage to the camcorder.
Basic Operation of the Camcorder Basic Operation of the Camcorder Turning the Camcorder On and Off You can choose to turn the camcorder on in CAMERA ( ) mode for making recordings or MEDIA ( ) mode for playing back recordings. Select the mode using the power switch. 30 To turn on the camcorder mode (A 40) or Set the power switch to CAMERA for MEDIA for mode (A 100). mode mode To turn off the camcorder Set the power switch to OFF.
Basic Operation of the Camcorder Setting the Shooting Mode In mode, you can change the shooting mode to match your shooting style. 31 (Auto) mode Y P O Set the mode switch to N. With this mode, the camcorder takes care of all the settings while you concentrate on recording (A 41). This operating mode is suitable if you just prefer not to bother with detailed camcorder settings. (Manual) mode C Set the mode switch to n.
Basic Operation of the Camcorder Drag Swipe your finger up and down or left and right across the screen. Used to scroll menus, to browse through index screen pages or to adjust slider controls like the volume. On some screens, you can achieve the same effect by touching the triangle control buttons. 32 IMPORTANT • The camcorder features a capacitive touch screen. In the following cases, you may not be able to perform touch operations correctly.
Basic Operation of the Camcorder Using the Menus Many of the camcorder’s functions can be adjusted from the FUNC. panel and the setup menus. For details about the available menu options and settings, refer to the appendix Menu Options Lists (A 142). FUNC. Panel In 33 mode: Operating modes: There are three ways to access the FUNC. panel: by touching [FUNC.] on the OLED screen, by pressing F or by pushing the joystick (Ý/Þ) to select [FUNC.] and then pressing S. After the FUNC.
Basic Operation of the Camcorder Setup Menus In this manual, navigating the setup menus is explained using the touch panel controls but they can also be navigated using the joystick and other buttons. The procedure below explains how to use both methods. If necessary, refer back to this section for details on using the joystick. Operating modes: 34 To use touch panel controls 1 mode only: Touch [FUNC.]. 2 Touch [MENU]. 3 Touch the tab of the desired menu.
First Time Settings First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. 35 Operating modes: 1 Use the power switch to turn on the camcorder. • The [Date/Time] screen will appear. 2 Touch a field you want to change (year, month, day, hours or minutes). • You can also push the joystick (ÏÐ) to move between the fields.
First Time Settings 2 Touch the desired language and then touch [OK]. 3 Touch [X] to close the menu. NOTES 36 • Some control buttons, such as [ZOOM], [FUNC.] and [MENU], will appear in English regardless of the language selected. Changing the Time Zone Change the time zone to match your location. The default setting is New York. In addition, the camcorder is able to retain the date and time of an additional location.
Using a Memory Card Using a Memory Card Memory Cards Compatible for Use with the Camcorder (as of April 2013) You can use the following types of commercially available Secure Digital (SD) cards with this camcorder. The movie recording function has been tested using SD/SDHC/SDXC memory cards made by Panasonic, Toshiba and SanDisk. For the latest information on cards that can be used, visit your local Canon Web site. Memory card type: .
Using a Memory Card Inserting and Removing a Memory Card Make sure to initialize (A 38) all memory cards before using them with this camcorder. 1 Turn off the camcorder. • Make sure the POWER/CHG indicator is off. 38 2 Open the double memory card slot cover. 3 Insert the memory card straight, with the label facing the front of the camcorder, all the way into one of the memory card slots until it clicks. • You can also use two memory cards, one in each memory card slot.
Using a Memory Card 2 Open the initialization screen for the desired memory card. [FUNC.] > [MENU] > > [Initialize ] > [6 Mem. Card A] or [7 Mem. Card B] > [Initialize] • Touching [FUNC.] is necessary only when performing the procedure in mode. • In the initialization screen, touch [Complete Initialization] to physically erase all the data rather than just clear the file allocation table of the memory card. 3 Touch [Yes].
Recording Movies and Photos 3 Recording Recording Recording Movies and Photos You can select the memory card that will be used to record movies and photos (A 39). For details on recording audio, refer to Recording Audio (A 79). 40 POINTS TO CHECK • Before you begin recording, make a test recording first to check that the camcorder is operating correctly. Preparing to Record 1 Attach a charged battery pack to the camcorder (A 21). 2 Insert a memory card into a memory card slot.
Recording Movies and Photos Recording in AUTO Mode When you use mode to shoot video and take photos, the camcorder will automatically adjust various settings for you. Operating modes: 1 Set the mode switch to N. 41 2 Set the power switch to CAMERA. To record video Press Y to begin recording. • During recording, Ü will appear on the screen. Additionally, if the handle unit is attached to the camcorder, the tally lamp will illuminate.
Recording Movies and Photos Smart AUTO In mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then adjust various settings (focus, exposure, color, image stabilization, image quality, among others), selecting the best settings for the scene you want to shoot. The Smart AUTO icon will change to one of the icons in the following table.
Recording Movies and Photos Intelligent IS Intelligent IS allows the camcorder to select the best image stabilization option based on your shooting method. The Intelligent IS icon will change to one of the following icons. In and modes, you can set the image stabilization mode manually (A 64).
Recording Movies and Photos 44 • Under certain conditions, the Smart AUTO icon that appears on the screen may not match the actual scene. Especially when shooting against orange or blue backgrounds, the sunset or one of the blue skies icons may appear and the colors may not look natural. In such case, we recommend recording in mode (A 45). • Photos are recorded as JPG files. During and modes, the camcorder can take photos during record pause mode or capture photos from a movie during playback (A 102).
Recording Movies and Photos Recording in n (Manual) Mode When the mode switch is set to n (Manual), you can enjoy full access to the menus and manually adjust the exposure, focus, white balance and many more of the camcorder’s settings to your preference. Even in mode, though, the camcorder can help you with the settings, for example, by using Special Scene recording programs (A 73). Operating modes: 45 1 Set the mode switch to n. 2 Set the power switch to CAMERA. 3 Record movies and photos.
Recording Movies and Photos 46 • When the camcorder switches form recording on one memory card to another during relay recording, the video will be recorded as two separate relay scenes. With the supplied software, Data Import Utility, you can join relay scenes recorded on both memory cards as a single scene and save it on a computer (A 114). • For scenes with a long recording time, the video (stream) file in a scene will be split approximately every 4 GB. Even in such case, playback will be continuous.
Selecting the Recording Mode (Video Quality) Selecting the Recording Mode (Video Quality) The camcorder offers various recording modes, depending on whether the movie format is AVCHD or MP4. When you record an MP4 movie with a recording mode of 3 Mbps, you can upload it to an FTP server and begin editing right away. In addition, for AVCHD movies, when the recording mode is set to 28 Mbps LPCM (59.94P) or 24 Mbps LPCM, you can enjoy two-channel linear PCM audio recording with a sampling frequency of 48 kHz.
Selecting the Recording Mode (Video Quality) Recording modes by movie format Movie format AVCHD Recording mode Resolution Audio format 28 Mbps LPCM (59.94P) Linear PCM 28 Mbps (59.94P) Dolby Digital 24 Mbps LPCM 1920x1080 Linear PCM 24 Mbps 48 17 Mbps Dolby Digital 5 Mbps 1440x1080 35 Mbps (59.94P) 24 Mbps MP4 1920x1080 17 Mbps AAC 4 Mbps 1280x720 3 Mbps 640x360 8 GB Memory card 35 min. 40 min. 1 hr. 3 hr. 16 GB Memory card 1 hr. 15 min. Y P O 1 hr. 25 min. 2 hr. 5 min.
Dual Recording and Relay Recording Dual Recording and Relay Recording When you record, you can use dual recording to record simultaneously on both memory cards so that you can use one of the movies as a backup. Alternatively, you can use relay recording so that if the memory card being recorded on becomes full, the recording will continue uninterrupted on the other memory card. Activating dual recording 49 The backup movie is recorded on memory card 3.
Selecting the Frame Rate Selecting the Frame Rate You can change the frame rate (the number of frames recorded per second) to change the look of your movies. When the recording mode is set to 28 Mbps LPCM (59.94P) or 28 Mbps (59.94P) for AVCHD movies or 35 Mbps (59.94P) for MP4 movies, the frame rate will automatically be set to 59.94P so you will not be able to select the frame rate. Operating modes: 50 1 Open the [Frame Rate] screen. [FUNC.
Slow & Fast Motion Recording Slow & Fast Motion Recording When you record MP4 movies, the camcorder can record with a frame rate (shooting frame rate) that is different from the playback frame rate. When you record with a shooting frame rate that is faster than the playback frame rate (overcranking), you create a slow motion effect. Oppositely, a slower frame rate will result in a fast motion effect (undercranking). Sound is not recorded in this mode.
CINEMA Mode and Cinema-Look Filters CINEMA Mode and Cinema-Look Filters In mode, you can use a variety of professional cinema-look filters to create unique movies with a distinctive appearance. You can also use cinema-look filters when you convert movies to MP4 (A 118). Operating modes: 52 1 Set the mode switch to E. 2 Touch [FILTER 1] to open the cinema-look filter selection screen. 3 Drag your finger up and down along the photos to select the desired cinema-look filter and then touch [OK].
CINEMA Mode and Cinema-Look Filters Options ( Default value) The camcorder offers 9 cinema-look filters. Select the desired filter while previewing the effect on the screen. [1. Cinema Standard] [2. Vivid] [3. Dream] [4. Cool] [5. Nostalgic] [6. Sepia] [7. Old Movies] [8. Memory] [9.
Focus Adjustment Focus Adjustment You can adjust the focus manually and use the peaking function to assist you or you can let the camcorder focus for you by using autofocus. With autofocus, you can set the autofocus speed. The camcorder also features face detection & tracking. POINTS TO CHECK 54 • Adjust the zoom before you start the procedure. Manual Focus Use the focus/zoom ring to focus manually. You can also use peaking to help you focus more accurately.
Focus Adjustment 3 Use Touch AF or turn the focus/zoom ring to obtain the desired focus position. 4 Touch [SET] to set the preset focus position. 5 After adjusting the focus, touch [ON] to return to the preset focus position. • Touch [SET] again to cancel the current preset focus position. • [ON] will be grayed out while adjusting the focus or zoom. • You can use the q > [Focus Preset Speed] setting to adjust the speed at which the camcorder returns to the preset focus position.
Focus Adjustment 1 and modes only: Press B. 2 Open the [AF Mode] screen. [FUNC.] > [MENU] > p > [AF Mode] 3 Touch the desired option and then touch [X]. • The icon of the selected option appears on the screen. 56 Options ( Default value) [= Instant AF] Sets the autofocus to Instant AF. The focus is adjusted at the highest speed. This Y P O mode is useful even when recording in very bright or low-light surroundings. This mode uses both the TTL system and external sensor for focusing.
Focus Adjustment • Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually. - Reflective surfaces - Subjects with low contrast or without vertical lines - Fast moving subjects - Through dirty or wet windows - Night scenes 57 Face Detection & Tracking The camcorder automatically detects people’s faces and uses this information to select the optimal focus and exposure settings.
Focus Adjustment Limiting Autofocus to Faces While using autofocus, you can limit the autofocus function only to cases when a subject’s face is detected and use manual focus for all other scenes. The camcorder will also adjust the brightness when focusing automatically on the subject’s face. 58 Set an assignable button to [~ Face Only AF] (A 97) and press the button. • ~ appears on the screen. NOTES • The camcorder may mistakenly detect the faces of non-human subjects.
Zooming Zooming Operating modes: To zoom in and out, you can use the focus/zoom ring, the zoom rockers on the camcorder and handle unit, the zoom buttons on the wireless controller or the zoom controls on the touch screen. In addition to the 20x optical zoom, in mode, you can turn on the digital zoom* (400x) with the p > [Digital Zoom] setting. This camcorder also features a digital tele-converter, which allows you to enlarge the image on the screen digitally.
Zooming Using the Zoom Rockers or Wireless Controller Move the zoom rocker on the camcorder or handle unit toward T (wide angle) to zoom out. Move it toward S (telephoto) to zoom in. 60 • You can also use the zoom buttons on the wireless controller. • By default, the camcorder’s zoom rocker (the rocker near the grip belt) operates at a variable speed – press gently for a slow zoom; press harder for faster zooms.
Zooming NOTES • When [High-Speed Zoom] is set to [i On] and [Zoom Rocker Zoom Speed] is set to [Y], [Zoom Speed Level] during record pause mode will automatically be set to [Z Fast]. Also, when pre-recording is activated during record pause mode, the zoom speed will be determined by the [Zoom Speed Level] setting. To use high-speed zoom During record pause mode, you can use high-speed zoom when [Zoom Speed Level] is set to [Z Fast]. During recording, the zoom speed is determined by [Zoom Speed Level].
Zooming To set the zoom speed of the wireless controller For the wireless controller, first set the overall zoom speed to one of three levels. The wireless controller operates at a constant speed that you can select. Refer to the following table for a summary of the zoom speed. 1 Open the [Zoom Speed Level] screen. [FUNC.] > [MENU] > p > [Zoom Speed Level] 62 2 Touch [Z Fast], [[ Normal] or [] Slow] and then touch [K].
Zooming Soft Zoom Control Soft zoom control allows you to start and/or stop the zoom gradually. 1 Open the [Soft Zoom Control] screen. [FUNC.] > [MENU] > p > [Soft Zoom Control] 2 Touch the desired option and then touch [X]. Options ( Default value) [j Off] Use this setting if you do not intend to use soft zoom control. [¬ Start] Zoom starts gradually. [® Stop] Zoom stops gradually. [¯ Start & Stop] Zoom start and stops gradually.
Advanced Image Stabilization Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating modes: 1 Open the [Image Stabilizer] screen. 64 [FUNC.] > [Image Stabilizer] 2 Touch the desired IS mode and then touch [X].
Automatic Gain Control (AGC) Limit Automatic Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter picture. However, using higher gain values may result in more noticeable video noise. You can select the AGC limit to curb the amount of noise by setting the maximum gain value to be used. The smaller the AGC limit, the darker the picture but the less noise it will contain.
Automatic Exposure Recording Programs Automatic Exposure Recording Programs With the automatic exposure (AE) recording programs, the camcorder will adjust the shutter speed and/or aperture value to obtain the optimal exposure. When using the AE recording programs, you can change functions like the white balance and image effects. Operating modes: 66 1 Open the screen of the desired recording program. [FUNC.] > [Rec. Programs] > [‚ Shutter-Pri. AE] or [“ Aperture-Pri.
Automatic Exposure Recording Programs NOTES • [‚ Shutter-Pri. AE]: - On screen only the denominator is displayed – [‚ 250] indicates a shutter speed of 1/250 second, etc. - When recording in dark surroundings, you can obtain a brighter picture by using slow shutter speeds; however, image quality may not be as good and autofocus may not work well. - The image may flicker when recording with fast shutter speeds.
Exposure Adjustment Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). In such cases, adjusting the exposure will correct this. This camcorder features a dedicated recording program, [n Manual Exposure], for adjusting the exposure manually. However, you can also compensate the exposure when using other recording programs.
Exposure Adjustment 1 From the exposure adjustment screen, touch [w] to select the zebra level. 2 Touch [70%] or [100%] and then touch [K]. 3 Touch [z] or [{] and then touch [X]. • The zebra pattern will appear on the overexposed areas of the picture. • Touch again to turn off the zebra pattern. NOTES 69 • Using the zebra pattern will not affect your recordings. Exposure Compensation When you use a recording program other than [n Manual Exposure], the camcorder will adjust the exposure automatically.
Exposure Adjustment To adjust the Touch AE function for highlights (Highlight AE) Certain subjects, like clouds or white objects, are easily overexposed and can end up appearing as bright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest area inside the y frame and the camcorder will automatically make corrections so that area is not overexposed.
White Balance White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions. Operating modes: POINTS TO CHECK • Select a recording program other than the Special Scene recording programs. 1 Open the white balance screen. [FUNC.] > [Ä White Balance] 2 Touch the desired option and then touch [X].
White Balance NOTES 72 • When you select a custom white balance: - Set p > [Digital Zoom] to [j Off]. - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, Å may keep flashing. The result will still be better than with [Ã Automatic].
Special Scene Recording Programs Special Scene Recording Programs Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. Operating modes: 1 Open the recording programs screen. [FUNC.] > [Rec. Programs] > [ú Portrait] 2 Touch the desired recording program and then touch [X].
Special Scene Recording Programs [œSpotlight] [ŠFireworks] To record spotlit scenes. To record fireworks. 74 NOTES • [ú Portrait]/[û Sports]/[ý Snow]/[þ Beach]: The picture may not appear smooth during playback. • [ú Portrait]: The blur effect of the background increases the more you zoom in (S). • [ý Snow]/[þ Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [Œ Low Light]: - Moving subjects may leave a trailing afterimage.
Image Effects Image Effects You can adjust the color depth, brightness, contrast, and sharpness of the image. Operating modes: POINTS TO CHECK • Select a recording program other than the Special Scene recording programs. 1 Open the image effects screen. [FUNC.] > [Image Effects] 2 Touch [ON] and then touch [Color Depth], [Sharpness], [Contrast] or [Brightness]. • Select [OFF] to turn off the image effects. 3 Touch [Ï] or [Ð] or drag your finger along the dial to adjust the effect level.
Setting the Time Code Setting the Time Code The camcorder can generate a time code signal and embed it in your recordings. In addition, the time code will appear in the recordings output from the HD/SD-SDI terminal ( only) and HDMI terminal. You can select whether the time code is output from the HDMI terminal (A 151). You can also select between a drop frame and non-drop frame time code. Operating modes: 76 Selecting the Running Mode You can select the running mode of the camcorder’s time code.
Setting the Time Code Selecting Drop Frame or Non-Drop Frame You can select between a drop frame (DF) or non-drop frame (NDF) time code, depending on how you plan to use your recording. When the frame rate is set to 23.98P, the time code will be set to non-drop frame. 1 Open the [DF/NDF] screen. [FUNC.] > [MENU] > 2 Select [ DF] or [ > [DF/NDF] NDF] and then touch [X]. • The time code’s display will differ depending on the setting. If you selected [ DF], the time code will appear as [00:00:00.
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. When you record a scene, the user bit will be recorded with it. The user bit is also output from the HD/SD-SDI terminal ( only) or HDMI terminal. Operating modes: 78 1 Open the user bit [Setting] screen. [FUNC.
Recording Audio Recording Audio You can record audio using the built-in stereo microphone, commercially available external microphone (INPUT 1/INPUT 2 terminals*, MIC terminal) or line input (INPUT 1/INPUT 2 terminals*). Using the INPUT 1/INPUT 2 terminals, you can select the audio input independently for channel 1 (CH1) and channel 2 (CH2). When you are recording AVCHD movies and the recording mode is set to 28 Mbps LPCM (59.
Recording Audio Connecting an External Microphone or External Audio Input Source to the Camcorder In order to use the microphone holder and INPUT 1/INPUT 2 terminals, the handle unit must be attached to the camcorder. Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an external device to the camcorder, plug the device’s cable into the desired terminal (햵).
Recording Audio Using the WM-V1 Wireless Microphone Using the optional WM-V1 Wireless Microphone, you can reliably record sound even when recording subjects at a distance exceeding the practical range of the built-in microphone. For details about using the WM-V1, refer to the instruction manual supplied with the microphone.
Recording Audio Settings for each audio scene 82 [Built-in Mic Freq. Response] [Built-in Mic Directionality] [h Normal] [h Normal] [ê Boost HF+LF Range] [î Wide] [H Auto (High)] [é Boost MF Range] [í Monaural] [k Automatic] [H Auto (High)] [è Low Cut Filter] [î Wide] [n] (manual): 70 [k Automatic] [H Auto (High)] [è Low Cut Filter] [í Monaural] (A 82) (A 83) (A 84) (A 84) [ä Mic Level] [Built-in Mic Att.
Recording Audio To display the audio level indicator Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically. 1 Open the automatic audio recording level screen. [FUNC.] > [ä Mic Level] > [m] (automatic) 2 Touch [Audio Level Indicator] and then touch [X]. 83 NOTES • When the audio level meter reaches the red point (0 dB), the sound may be distorted.
Recording Audio POINTS TO CHECK • Set [— Audio Scene] to [„ Custom Setting] (A 81). 1 Open the [Built-in Mic Att.] screen. [FUNC.] > [MENU] > p > [Built-in Mic Att.] 2 Touch the desired option and then touch [X]. 84 Options ( Default value) [2 Automatic] The camcorder will automatically activate the built-in microphone attenuator as necessary for optimal audio recording levels so high audio levels will not be distorted.
Recording Audio 1 Open the [Built-in Mic Directionality] screen. [FUNC.] > [MENU] > p > [Built-in Mic Directionality] 2 Touch the desired option and then touch [X]. Options ( Default value) [í Monaural] Mono recording that emphasizes sound coming from the front of the camcorder/ microphone. [h Normal] Standard stereo recording; a middle point between the [î Wide] and [í Monaural] settings in reach.
Recording Audio Low Cut Filter (MIC Terminal) When you are recording using a microphone connected to the MIC terminal, you can activate the low cut filter to reduce the sound of blowing wind, a car’s engine and similar ambient sounds. Operating modes: 1 Open the [MIC Low Cut] screen. [FUNC.] > [MENU] > p > [MIC Low Cut] 86 2 Touch [i On] and then touch [X].
Recording Audio NOTES • Even if you select [ INPUT 1], the audio recording level will be determined by the audio level switch and dial for INPUT 2. • If you select [ Built-in Mic/MIC], the camcorder will record monaural sound. In such case, [— Audio Scene] will be set to [‘ Standard]. Audio Recording Level (INPUT Terminals) You can set the audio recording level for audio input to automatic or manual independently for each channel.
Recording Audio 1 Open the desired INPUT terminal’s sensitivity submenu. [FUNC.] > [MENU] > p > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming] 2 Touch the desired level and then touch [X]. • The available sensitivity levels are +12 dB, +6 dB, 0 dB, -6 dB and -12 dB.
Using Headphones Using Headphones Use headphones for playback or to check the audio level while recording. The following procedure explains how to adjust the volume. Operating modes: 89 1 Open the [Headphone Volume] screen. Y P O [FUNC.] > [MENU] > q > [Headphone Volume] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch [Ô] or [Õ] to adjust the volume and then touch [X]. • You can also drag your finger along the volume bar.
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder output and record color bars and a 1 kHz audio reference signal and output them from the HDMI OUT terminal, AV OUT terminal, HD/SD-SDI terminal ( only) and × (headphone) terminal (audio reference signal only). Operating modes: 90 Recording Color Bars You can choose between SMPTE standard-definition color bars and ARIB multi-format HDTV color bars. 1 Open the [Color Bars] menu. [FUNC.
Video Snapshot Video Snapshot Record a series of short scenes. To record a video snapshot scene, set an assignable button to [¦ Video Snapshot] in advance. Operating modes: 1 Set an assignable button to [¦ Video Snapshot] (A 97). 2 Press the assignable button to activate video snapshot mode. • D (the default length of a video snapshot scene) appears on the screen. • Press the button again to deactivate video snapshot mode. 3 Press Y.
Pre-Recording Pre-Recording The camcorder will start recording 3 seconds before you press Y, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. By default, the pre-recording function is assigned to assignable button 2. Operating modes: 92 1 Press . • z will appear on the screen. • Press again to turn off pre-recording. 2 Press Y. • The scene recorded on the memory card will start 3 seconds before Y was pressed.
Onscreen Displays and Data Code Onscreen Displays and Data Code You can turn most onscreen displays on or off. Operating modes: Repeatedly press D to turn the onscreen displays on/off in the following sequence: mode: • All displays on • Onscreen markers1 • Displays off 93 mode2: • Only data code on • All displays on 1 2 The onscreen markers will be displayed only when p > [Onscreen Markers] is set to an option other than [j Off]. Pressing D has the same effect as touching the screen.
Infrared Recording Infrared Recording This camcorder features the ability to shoot movies in dark surroundings using the camcorder's infrared light and other sources of infrared light. Also, you can select whether the lighter areas of the picture appear in green or white. To use the infrared light, set an assignable button to [< IR Light] or use the menu, as described below. Make sure you attach the handle unit to the camcorder in advance.
Using the GP-E2 GPS Receiver Using the GP-E2 GPS Receiver When you attach the optional GP-E2 GPS Receiver to the camcorder, you can acquire GPS information and add it to your movies and photos. For details about how to attach and use the receiver, refer also to the receiver's instruction manual. Operating modes: 95 Y P O When connecting the GP-E2 GPS Receiver to the camcorder, use the connecting cable supplied with the receiver.
CUSTOM Dial and Button 4 Customization Customization CUSTOM Dial and Button 96 You can assign to C and the CUSTOM dial one of several frequently used functions. You can then adjust the selected function using C and the CUSTOM dial, without having to access the menu. Operating modes: 1 Open the [CUSTOM Dial & Button] screen. [FUNC.] > [MENU] > q > [CUSTOM Dial & Button] 2 Touch the desired option and then touch [X].
Assignable Buttons Assignable Buttons The camcorder conveniently features 5 buttons to which you can assign various functions. By assigning often used functions, you can quickly access them with a single press of a button. Operating modes: 97 Changing the Assigned Function Y P O 1 Open the selection screen for the desired assignable button. C [FUNC.] > [MENU] > q > Select from [Assign Button 1] to [Assign Button 5] 2 Select the desired option and then touch [X].
Assignable Buttons [ [ [ [ AGC Limit]* Functions the same as selecting [x AGC Limit] (A 65) in the FUNC. panel. Focus]* Functions the same as selecting [< Focus] (A 54) in the FUNC. panel. Exposure]* Functions the same as selecting [y Exposure] (A 68) in the FUNC. panel. Audio Scene] Functions the same as selecting [— Audio Scene] (A 81) in the FUNC. panel. 98 [ [ [ Mic Level]* Functions the same as selecting [ä Mic Level] (A 82) in the FUNC. panel.
Saving and Loading Menu Settings Saving and Loading Menu Settings After you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, you can save those settings on a memory card. You can load those settings at a later date or on another XA25 or XA20 camcorder so that you can use that camcorder in the same way. Operating modes: 99 Saving Menu Settings to a Memory Card Menu settings must be saved to memory card 3.
Playing Back Video 5 Playback Playback Playing Back Video This section explains how to play back scenes. For details on playing back scenes using an external monitor, refer to Connecting to an External Monitor (A 107). 100 Operating modes: 1 Set the power switch to MEDIA. • The AVCHD movie index screen will appear. 2 If necessary, change the index screen. [6 ¸] > Tab of the desired memory card (6 or 7) > Control button of the content you want to play back ([y· Movies] or [y¸ Movies]).
Playing Back Video About folder names MP4 movies and photos are saved as files in folders. The folder names appear in a format such as "101_0501." The first three digits indicate the folder number and the last four digits indicate the month and day (May 1, for the example folder above). During playback: 101 ! Jump to the beginning of the scene. Double-tap to jump to the previous scene. " Jump to the beginning of the next scene. # Pause the playback. $ Fast playback* backward/forward.
Playing Back Video Displaying scene information 1 In either the AVCHD or MP4 movie index screen, touch [I]. 2 Touch the desired scene. • The scene information screen appears. • If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS information will also appear. • Touch Ï/Ð to select the previous/next scene. 102 3 Touch [K] twice when finished. IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing.
Deleting Scenes Deleting Scenes You can delete those scenes that you are not interested in keeping. Deleting scenes allows you also to free up space on the memory card. Operating modes: 103 Deleting a Single Scene 1 Play back the scene you wish to delete (A 100). 2 Touch the screen to display the playback controls. 3 Open the [Delete] screen. [Ý] > [FUNC.] > [Delete] 4 Touch [Yes]. • The scene is deleted. 5 Touch [OK]. Y P O Deleting Scenes from the Index Screen 1 Open the index screen (A 100).
Deleting Scenes 2 After selecting all the desired scenes, touch [OK]. Options [date/folder name] Delete all the scenes recorded on a particular date. For AVCHD movies, the date will appear in the control button. For MP4 movies, the folder name (A 101) will appear, with the last four digits indicating the month and day. 104 [Select] Select individual scenes to delete. [All Scenes] Delete all the scenes. IMPORTANT • Be careful when deleting recordings. Once deleted, scenes cannot be recovered.
Dividing Scenes Dividing Scenes You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest. Operating modes: 1 Play back the desired scene (A 100). 2 Pause the playback at the point where you want to divide the scene. 3 Open the screen for dividing scenes. [FUNC.] > [Divide] 4 Bring the scene to a precise point, if necessary. • The point at which the movie will be divided is indicated by the marker. • Playback controls will appear on the screen (A 102).
Trimming Scenes Trimming Scenes You can trim MP4 scenes by removing everything up to a certain point or everything after a certain point. Operating modes: 106 1 Play back the desired scene (A 100). 2 Pause the playback. 3 Open the screen for trimming scenes. [Edit] > [Trim] 4 Bring the scene to a precise point, if necessary. • The point at which the movie will be trimmed is indicated by the marker. • Playback controls will appear on the screen (A 102).
6 Connecting to an External Monitor External Connections External Connections Connecting to an External Monitor When you connect the camcorder to an external monitor for recording or playback, use the terminal on the camcorder that matches the one you wish to use on the monitor. Then, select the video signal output configuration. The camcorder will automatically switch between the AV OUT and HDMI OUT terminals based on the external connection.
Connecting to an External Monitor Selecting the Terminal Used For Output To output your recordings on an external monitor, you must first select which terminal you will use. 1 Open the [Output Terminal] screen. [FUNC.] > [MENU] > q > [Output Terminal] • Touching [FUNC.] is necessary only when performing the procedure in 108 mode. 2 Touch the desired option and then touch [X]. • If you selected [ HD/SD-SDI], [ HD/SD-SDI & HDMI] or [ relevant procedure below to configure the output signal.
Connecting to an External Monitor NOTES • • • • • • • When q > [Output Terminal] is set to [ HD/SD-SDI & HDMI], the signal output from the HDMI OUT terminal will be determined by the q > [HD/SD-SDI Output] setting. The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder. There will be no video output from the AV OUT terminal while an external monitor is connected to the HDMI OUT terminal.
Audio Output Audio Output The camcorder can output audio from the HD/SD-SDI terminal ( only), HDMI OUT terminal, AV OUT terminal or × (headphone) terminal. When audio is output from the AV OUT terminal or × (headphone) terminal, you can configure the following settings.
7 Viewing Photos Photos Photos Viewing Photos Operating modes: 111 1 Set the power switch to MEDIA. • The AVCHD movie index screen will appear. 2 Open the photo index screen. [6 ·] > Tab of the desired memory card (6 or 7) > [} Photos] 3 Look for the photo you want to play back. C Y P O !Index screen button. Displays the currently selected memory card. Press to change the index screen. "Drag your finger left/right for the next/previous index page*. #Display the next/previous index page.
Viewing Photos Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using the scroll bar. 1 Touch the screen to display the playback controls. 2 Touch [h]. 3 Drag your finger left and right along the scroll bar and then touch [K]. 112 IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover.
Deleting Photos Deleting Photos You can delete those photos that you are not interested in keeping. Operating modes: Deleting a Single Photo 1 In single photo view, select the photo you want to delete. 2 Touch the screen to display the playback controls. 3 Open the [Delete] screen. [FUNC.] > [Delete] 4 Touch [ Proceed] and then touch [Yes]. • The photo is deleted. 5 Drag your finger left/right to select another photo to delete or touch [X].
Saving Recordings to a Computer 8 Saving/Sharing Recordings Saving/Sharing Recordings Saving Recordings to a Computer 114 Using the supplied software Data Import Utility to save your movies, you have the additional advantage of automatically joining scenes that were saved as multiple files so you can work with them as single scenes with the editing software of your choice. Connection Diagram We recommend that you power the camcorder from a household power outlet using the compact power adapter.
Saving Recordings to a Computer Installing the Software See Installation and System requirements in the Data Import Utility Software Guide (PDF file) for stepby-step installation instructions and full system requirements. Below are the main system requirements. OS Windows XP1, SP3 Windows Vista2, SP2 Windows 72, SP1 Windows 82 Mac OS X 10.6, 10.7 or 10.8 CPU Intel® Core or equivalent Intel® CPU (not compatible with Power PC) RAM 1 GB (2 GB for Windows 7 and 8, 64-bit version and Mac OS X 10.
Copying Recordings Between Memory Cards Copying Recordings Between Memory Cards You can copy recordings from one memory card to the other. Copying Scenes from the Movie Index Screen 116 Operating modes: 1 Open the desired movie index screen (A 100). • To copy all the scenes recorded on a specific date, drag your finger left/right until a scene you want to copy appears. 2 Open the screen to copy scenes. [FUNC.] > [Copy (6'7)] or [Copy (7'6)] 3 Touch the desired option and then touch [Yes].
Copying Recordings Between Memory Cards Copying Photos from the Index Screen Operating modes: 1 Open the desired photo index screen (A 111). 2 Open the screen to copy photos. [FUNC.] > [Copy (6'7)] or [Copy (7'6)] 3 Touch the desired option and then touch [Yes]. • When you select [Select], perform the following procedure to select the individual photos you want to copy before touching [Yes]. • Touch [Stop] to interrupt the operation while it is in progress. • The selected photos are copied.
Converting Movies to MP4 Format Converting Movies to MP4 Format You can convert AVCHD movies into MP4 movies or even convert MP4 movies into smaller MP4 movies. This is convenient, for example, when you want to upload the MP4 movies to the Web. When you convert movies on one memory card, they will be saved to the other memory card. While converting movies, the camcorder can add a cinema-look filter to the converted movie. 118 Operating modes: 1 Open the desired movie index screen (A 100).
Copying Recordings to an External Video Recorder Copying Recordings to an External Video Recorder Operating modes: In High Definition Connect the camcorder to Blu-ray Disc recorders and other AVCHD-compatible digital video recorders using the supplied USB cable to make perfect copies of your movies in high definition. If the external digital video recorder has an SD memory card slot*, you can use the memory card to copy your movies without connecting the camcorder.
Copying Recordings to an External Video Recorder 5 Camcorder: Resume playback. • By default, the data code will be embedded in the output video signal. You can change this using the s > [Data Code] setting. 6 External recorder: Start recording when the scene you wish to copy appears; stop recording when it ends. 7 Camcorder: Stop playback.
9 Introduction to Wi-Fi Wi-Fi Functions Wi-Fi Functions Introduction to Wi-Fi When you use the camcorder’s Wi-Fi function to connect to a smartphone or tablet, you can wirelessly save, play back and upload your recordings. You can even use a smartphone or tablet (iOS or Android device1) as a remote control and record using the device’s Web browser. Refer to Glossary (A 141) for a definition of the frequently used terms in this text.
Introduction to Wi-Fi Wi-Fi connection After you download the Movie Uploader app3, wirelessly connect the camcorder to an iOS device (A 132) to save, play back and upload your recordings. You can even use this connection type if you plan to share videos on YouTube and Facebook on the go. 3 The Movie Uploader app, provided by PIXELA, is available for free from the App Store. 122 iOS device Wi-Fi connection Wirelessly connect the camcorder to a wireless router (access point) on a Wi-Fi network (A 137).
Introduction to Wi-Fi NOTES • While using Wi-Fi functions other than remotely controlling the camcorder using the Wi-Fi Remote application, do not open the double memory card slot cover. Before using Wi-Fi functions Based on the function, the camcorder will wirelessly connect to a Wi-Fi-enabled device, such as a smartphone, or directly to a Wi-Fi network via an access point (wireless router)*. After selecting the function you want to use, follow the onscreen directions to connect the camcorder.
Remote Operation Via the Wi-Fi Remote Application Remote Operation Via the Wi-Fi Remote Application You can operate the camcorder remotely via Wi-Fi Remote, a Web browser application that can be accessed using the Web browser* of devices compatible with Wi-Fi networks**. The Wi-Fi Remote application lets you monitor the image through live view, start and stop recording, and remotely control the shooting mode, exposure, white balance, aperture, gain, shutter speed, focus and zoom.
Remote Operation Via the Wi-Fi Remote Application 3 iOS/Android device: Activate Wi-Fi in the settings screen. • The network names of detected access points will appear. 4 iOS/Android device: Touch the access point with the same SSID displayed in step 2. • If you have performed this procedure before and you have not changed the camcorder's password, the connection will be established automatically. 5 iOS/Android device: Enter the camcorder’s password set previously.
Remote Operation Via the Wi-Fi Remote Application Advanced controls 1 6 2 3 4 5 7 126 8 9 10 11 12 2 13 22 21 14 20 19 Y P O 18 17 16 15 When the recording program is set to [“ Aperture-Pri. AE]: C 10 12 Screen selection tab: Switch between advanced controls and basic controls. Recording program (A 66, 73) Time code (A 76) Wi-Fi Remote connection status Operation (A 155) D (key lock): Press to lock all the controls on the application's screens.
Remote Operation Via the Wi-Fi Remote Application 8 Memory card status/Remaining recording time: The currently selected memory card slot will be indicated with a Î mark above it.
Remote Operation Via the Wi-Fi Remote Application Selecting the recording program 1 Press the recording program button. • The recording programs will appear. 2 Select the desired recording program. Adjusting the exposure compensation value 128 1 Touch [y]. 2 Press the exposure compensation value button. • The exposure compensation screen will appear. 3 Select the desired exposure compensation value. • The selected value will be displayed on the Wi-Fi Remote screen and will be applied to the camcorder.
Remote Operation Via the Wi-Fi Remote Application Adjusting the gain 1 Press the gain button. • The available gain values will appear. 2 Select the desired gain value. • The selected value will be displayed on the Wi-Fi Remote screen and will be applied to the camcorder. 129 Adjusting the shutter speed 1 Press the shutter speed button. • The available shutter speed values will appear. 2 Select the desired shutter speed value.
Remote Browse: Viewing Recordings Using a Web Browser on Your iOS or Android Device Remote Browse: Viewing Recordings Using a Web Browser on Your iOS or Android Device With the Remote Browse function, you can use the Web browser on your iOS device, Android device, computer or similar device to show a list of recordings in the camcorder, play them back and even download them.* This conveniently allows you to view your recordings while you are out.
Remote Browse: Viewing Recordings Using a Web Browser on Your iOS or Android Device 10 iOS/Android device: Touch to return to the index screen. 11 Camcorder: Touch [End] > [OK] when finished. NOTES • The following types of MP4 scenes will be recognized as multiple files on other devices. - Scenes exceeding 4 GB - Scenes recorded at 35 Mbps exceeding 30 minutes - Scenes recorded with a recording mode other than 35 Mbps exceeding 1 hour • Only one device may be connected to the camcorder at a time.
Uploading Recordings Using an iOS Device Uploading Recordings Using an iOS Device Using the Movie Uploader app* for iOS devices, you can wirelessly connect the camcorder to the device to upload your movies to YouTube and your movies and photos to Facebook even when you are away from your home network. You can even save** and play back MP4 movies and photos on the iOS device. 132 * The Movie Uploader app, provided by PIXELA, is available for free from the App Store.
Uploading Recordings Using an iOS Device NOTES • Depending on factors such as the wireless network conditions, it can take some time to upload video files. • The procedure above may differ depending on the version of iOS you are using. • For details about the Movie Uploader app, visit PIXELA’s Web site. http://www.pixela.co.jp/oem/canon/e/movieuploader/ (English only) • The following types of MP4 scenes will be recognized as multiple files on other devices.
Playback on a Computer Playback on a Computer Using the Media Server function, you can wirelessly view your movies and photos from your computer or similar device. You will need an access point connected to your home network and software installed on your computer that can play back movies and photos on the media server. We recommend that you connect the computer to the access point using a LAN cable. Refer also to the instruction manuals for the computer, software and access point.
Transferring Files to a Computer or FTP Server Transferring Files to a Computer or FTP Server You can wirelessly transfer files (recordings) directly to a computer or an FTP server. You will need a correctly configured FTP server. During the manual setup procedure, you will need to enter the FTP server's IP address, port, user name, password and file transfer destination (where the files will be transferred to). To enter text for the various settings, use the virtual keyboard (A 136).
Transferring Files to a Computer or FTP Server Using the virtual keyboard When you need to enter text for various settings, touch the text field and a virtual keyboard will appear on the screen. You must use the touch screen to operate the virtual keyboard. The illustrations below explain the various keys you can use. 136 ! Switch between letters and numbers/special characters. " Change the position of the cursor. # Delete the character to the cursor’s left (backspace). $ Caps Lock.
Wi-Fi Connection Using an Access Point Wi-Fi Connection Using an Access Point The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even remember the settings for the four most recently used access points. General requirements • Correctly configured router that complies with the 802.11a/b/g/n protocol and is Wi-Fi certified (bears the logo shown on the right) and a home network. Operating modes: Select the desired connection method.
Wi-Fi Connection Using an Access Point 2 Within 2 minutes, touch [OK] on the camcorder’s screen. 138 • The camcorder will connect to the access point. • You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. • After the connection is established, continue using the function you were previously using.
Wi-Fi Connection Using an Access Point 7 In the [Default Gateway] field, touch [0.0.0.0] and then touch [Í]/[Î] to change the value and then touch [Next]. • Touch the next field to change the value, as necessary. 8 Touch [Next]. 9 For the [Primary DNS Server] and [Secondary DNS Server] fields, touch [0.0.0.0] and then touch [Í]/[Î] to change the value and then touch [Next]. • Touch the next field to change the value, as necessary. 10 Touch [Next]. 11 Touch [OK].
Viewing and Changing Wi-Fi Settings Viewing and Changing Wi-Fi Settings When the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view the Wi-Fi connection settings and even change them, if necessary. To enter text for the various settings, use the virtual keyboard (A 136). Operating modes: 140 1 Open the [Wi-Fi] screen. [MENU] > s > [Wi-Fi] To view the smartphone’s connection settings 2 Touch [Smartphone Connection]. • The camcorder’s SSID will appear.
Viewing and Changing Wi-Fi Settings Glossary This is a glossary of some of the basic terms used frequently in this chapter. The documentation for your access point may also contain a glossary you can refer to. Access Point A wireless access point (WAP) is a device that allows wireless devices, like your camcorder, to connect to a wired network (including to the Internet) using the Wi-Fi standard. In most cases, this will be your wireless router.
Appendix: Menu Options Lists 10 Additional Information Additional Information Appendix: Menu Options Lists 142 Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (A 33). For details about each function, see the reference page. Menu options without a reference page are explained after the tables. Underlined menu options indicate default values. FUNC. Panel FUNC. Panel - Mode AUTO n CINEMA [MENU] Open the setup menus z z z 34 [Rec.
Appendix: Menu Options Lists Control Button [„ Wi-Fi Remote] 1 2 Setting options/Function AUTO n CINEMA A z z z 124 [ON], [OFF] Option available only for recording movies. The setting is maintained when the camcorder is switched from (Except for [„ Custom Setting] under [— Audio Scene].) FUNC. Panel - or mode to mode.
Appendix: Menu Options Lists Menu item [Focus Assistance] 144 A Setting options [i On], [j Off] – [Face Detection & Tracking] [i On }], [j Off] 57 [Auto Backlight Correction] [i On], [j Off] 70 [Auto Slow Shutter] [i On], [j Off] – [ND Filter] [k Automatic], [j Off] – [Conversion Lens] [¾ TL-H58], [¿ WA-H58], [j Off] – [Intelligent IS] [È With È], [ 43 [Onscreen Markers] [j Off], [4 Level (Gray)], [ [ Grid (Black)] [IR Light] [i On], [j Off] – [IR Rec Color] [± White], [² Green]
Appendix: Menu Options Lists [Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting. • Minimum shutter speed used: 1/30; 1/15 when the frame rate is set to PF29.97 or 29.97P; 1/12 when the frame rate is set to 23.98P. • The auto slow shutter can be activated only during mode, when the recording program is set to [’ Programmed AE] or during infrared mode. • If a trailing afterimage appears, set the slow shutter to [j Off].
Appendix: Menu Options Lists [Data Code]: Displays the date and/or time when the scene or photo was recorded. [( Camera Data]: Displays the aperture (f-stop) and shutter speed used when recording the scene or photo. 146 [TV Type]: When you connect the camcorder to a TV using the supplied STV-250N Stereo Video Cable, select the setting according to the type of TV in order to display the picture in full and in the correct aspect ratio. [+ 4:3 TV]: TV sets with 4:3 aspect ratio.
Appendix: Menu Options Lists Menu item Setting options [Initial Time Code] [Reset], [OK] [User Bit Output Mode] [ Fixed], [ [User Bit Type] [ Setting], [ [Color Bars] [j Off], [ [1 kHz Tone] [ü -12 dB], [þ -18 dB], [ÿ -20 dB], [j Off] Pulldown] Time], [ SMPTE], [ Date] ARIB] A y } z – – 76 z – – 78 z – – 78 z – – 90 z – – 90 z z z – [Available Space in Memory] [6], [7] z – – – [Used Space in Memory] [6], [7] – z z – [Initialize [6 Mem.
Appendix: Menu Options Lists q System Setup Menu item Setting options y } A [ ], [Dansk], [Deutsch], [ ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ ], [Suomi], [Svenska], [Türkçe], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] z z z 35 [Time Zone/DST] ["] (home time zone) or [#] (travel time zone): [New York], list of world time zones [$] (DST adjustment): Toggle on or off z z z 36 [Date/Time] [Date/Time]: – [Date Format
Appendix: Menu Options Lists Menu item Setting options y } A [Powered IS Button] [Î Press and Hold], [Ï Toggle On/Off] z – – – [Set WB Priority] [Ã Automatic], [¼ Daylight], [½ Shade], [¾ Cloudy], [¿ Fluorescent], [À Fluorescent H], [É Tungsten], [ Color Temperature], [Æ Set 1], [Ç Set 2] z – – – [Focus/Zoom Ring Direction] [h Normal], [X Reverse] z – – – [Focus/Zoom Ring Response] [Z Fast], [[ Normal], [] Slow] z – – – [Focus Preset Speed] [Z Fast], [[ Normal], [] Slow] z –
Appendix: Menu Options Lists 150 [OLED Brightness]: Sets the OLED screen to one of two brightness levels. You can use this to make the screen brighter when recording in bright places, for example. [OLED Dimmer]: When set to on, the illumination sensor will detect the surrounding brightness and the camcorder will automatically adjust the screen's brightness accordingly. When you need to carefully monitor picture quality when recording, keep this setting set to off.
Appendix: Menu Options Lists [HDMI Time Code]: When set to [i On], the HDMI signal output from the camcorder includes the camcorder's time code. [HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMI OUT terminal. [Output Onscreen Displays]: When set to [i On], the camcorder’s onscreen displays will appear also on the screen of a TV or monitor connected to the camcorder.
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Displays Recording Movies 8 9 10 11 1213 14 15 16 17 15 18 1 152 2 3 4 5 6 7 19 20 21 22 23 24 25 26 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Control button [FUNC.]: Open the FUNC.
Appendix: Onscreen Icons and Displays Recording Movies mode 36 8 9 mode 1216 8 14 1 29 30 31 32 4 33 34 35 42 17 37 38 39 40 44 45 31 3 4 46 43 29 Recording program (A 66, 68, 73) ; Infrared mode (A 94), < / = Infrared light on/off (A 94) 30 Exposure compensation (A 69) 31 AGC limit (A 65); Gain (during the [n Manual Exposure] recording program) (A 68) 32 Manual focus (A 54) 33 Backlight correction (A 70) 34 White balance (A 71) 35 GPS (A 95) 36 Image effects (A 75) 37 Slow & fast motion record
Appendix: Onscreen Icons and Displays Playing Movies (during playback) 9 14 8 49 154 48 50 51 48 Playback control buttons (A 101) 49 Scene number 50 Data code (A 93, 146) 51 Volume controls (A 101) Viewing Photos 52 1 C Y P O 53 54 50 55 52 Control button [MENU]: Open the setup menus (A 34, 143) 53 Current photo / Total number of photos 54 File number (A 147) 56 55 Control button [f]: Return to the photo index screen (A 111) 56 Control button [h]: Photo jump (A 112) NOTES • You can press D to
Appendix: Onscreen Icons and Displays 9 Operation Ü Record, Û Record pause, Ð Playback, Ý Playback pause, × Fast playback, Ø Fast reverse playback, Õ Slow playback, Ö Slow reverse playback, Ó Frame advance, Ô Frame reverse. 14 Remaining battery time • The icon shows a rough estimate of the remaining 100% 75% 50% 25% 0% charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon.
Troubleshooting Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
Troubleshooting Recording Pressing Y will not start recording. - You cannot record while the camcorder is writing previous recordings onto a memory card (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory card is full or it already contains 3,999 scenes (the maximum number of scenes for AVCHD movies). Delete some recordings (A 103, 113) or initialize the memory card (A 38) to free some space. - The file numbers have reached their maximum value.
Troubleshooting Cannot mark individual scenes/photos in the index screen with a checkmark ! - You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All Photos] option instead of [Select]. Indicators and Onscreen Displays 158 lights up in red. - Battery pack is exhausted. Replace or charge the battery pack. appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed.
Troubleshooting Horizontal bands appear on the screen. - This is a phenomenon typical of CMOS image sensors when recording under some types of fluorescent, mercury or sodium lamps. To reduce the symptoms, set the recording program to [Programmed AE] or [Shutter-Pri. AE] (A 66). This is not a malfunction. Viewfinder picture is blurred. - Adjust the viewfinder with the dioptric adjustment lever (A 25). No picture appears on the viewfinder. - Pull out the viewfinder to activate it.
Troubleshooting Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV. 160 Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input.
Troubleshooting Wireless playback on a computer or similar device is not smooth. - Playback may not be smooth depending on the access point’s settings and capability. - Connect the computer or similar device to the access point using a LAN cable. - Remove any objects between the camcorder and access point that may interfere with the wireless signal. - Move the camcorder closer to the access point.
Troubleshooting 162 Cannot convert the scene - The camcorder cannot convert scenes that were recorded using a video configuration that is not supported (PAL or SECAM). - You cannot convert scenes that were recorded or edited using another device and then transferred to a memory card connected to a computer. - MP4 scenes recorded with a recording mode of 4 Mbps can only be converted to MP4 movies with a recording mode of 4 Mbps or 3 Mbps.
Troubleshooting Check the memory card - Cannot access the memory card. Check the memory card and make sure it is inserted correctly. - A memory card error occurred. The camcorder cannot record or display the image. Try removing and reinserting the memory card, or use a different memory card. - You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (A 37).
Troubleshooting Need to recover files from the memory card. Change the position of the LOCK switch on the memory card. - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. 164 No memory card - Insert a compatible memory card into the camcorder (A 38).
Troubleshooting To record video on this memory card, it is recommended to use a video quality setting other than [59.94P Recording]. - When using a memory card rated SD Speed Class 2 or 4, you may not be able to record movies if you use a recording mode of 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps (59.94P).
Troubleshooting Unable to complete WPS. - Turn off the camcorder and access point. After a short while, turn them on again and try again. If the problem persists, perform setup using the [Search for Access Points] option (A 137). 166 Unable to complete WPS. Try the operation again. - Some access points require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your access point.
Troubleshooting Wi-Fi error Incorrect encryption method - Make sure the camcorder and access point are using the same authentication/encryption method. - If the access point is using MAC address filtering, enter the camcorder’s MAC address in the access point’s configuration screen. Wireless communication is not working correctly - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal.
Handling Precautions Handling Precautions Camcorder 168 Be sure to observe the following precautions to ensure maximum performance. • Save your recordings periodically. Make sure to transfer your recordings to an external device such as a computer or digital video recorder (A 114) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory card. Canon shall not be liable for any data loss.
Handling Precautions • When mounting the camcorder on a tripod, make sure that the 6.5 mm tripod’s fastening screw is shorter than 6.5 mm (0.26 in.). Using other tripods may damage the camcorder. • When recording movies, try to get a calm, stable picture. Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness.
Handling Precautions Regarding the use of non-Canon battery packs 170 • For your safety, battery packs that are not genuine Canon battery packs will not be charged even if you attach them to this camcorder or to the optional CG-800 Battery Charger. • We recommend using genuine Canon battery packs bearing the Intelligent System mark. • If you attach to the camcorder battery packs that are not genuine Canon battery packs, will appear and the remaining battery time will not be displayed.
Handling Precautions Lithium Button Battery WARNING! • The battery used in this device may present a fire or chemical burn hazard if mishandled. • Do not disassemble, modify, immerse in water, heat above 100 °C (212 °F) or incinerate the battery. • Replace with a CR2025 battery made by Panasonic, Hitachi Maxell, Sony, FDK, or with Duracell2025. Use of other batteries may present a risk of fire or explosion. • Do not insert the battery into the mouth. If swallowed, seek medical assistance immediately.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body 172 • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. • Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper.
Maintenance/Others Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. 173 Playback on a TV Screen You can only play back your recordings on TVs compatible with the NTSC system.
Optional Accessories Optional Accessories (Availability differs from area to area) The following optional accessories are compatible with this camcorder. Select accessories are described in more detail in the following pages.
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Optional Accessories Recording AVCHD movies Battery pack Recording (maximum) Recording mode BP-820 BP-828 Playback Viewfinder OLED Viewfinder OLED 140 min. 140 min. 85 min. 85 min. 220 min. 24 Mbps LPCM / 24 Mbps 150 min. 150 min. 90 min. 90 min. 230 min. 17 Mbps 150 min. 150 min. 90 min. 90 min. 235 min. 5 Mbps 155 min. 155 min. 90 min. 90 min. 240 min. 28 Mbps LPCM (59.94P) / 28 Mbps (59.94P) 210 min. 210 min. 130 min. 130 min. 340 min.
Optional Accessories Recording AVCHD movies Battery pack BP-820 BP-828 Recording (maximum) Recording mode Recording (typical)* Playback OLED Viewfinder OLED Viewfinder OLED 28 Mbps LPCM (59.94P) / 28 Mbps (59.94P) 145 min. 145 min. 85 min. 85 min. 230 min. 24 Mbps LPCM / 24 Mbps 155 min. 150 min. 90 min. 90 min. 240 min. 17 Mbps 155 min. 155 min. 90 min. 90 min. 245 min. 5 Mbps 155 min. 155 min. 95 min. 90 min. 250 min. 28 Mbps LPCM (59.94P) / 28 Mbps (59.94P) 215 min.
Optional Accessories WA-H58 Wide Attachment This Wide Attachment lens decreases the focal length by a factor of 0.75, giving you a wide perspective for indoor shots or panoramic views. • The Wide Attachment cannot be used together with the supplied lens hood with lens barrier. 178 Protect Filter 58 mm, ND4L Filter 58 mm, ND8L Filter 58 mm Neutral density and MC protector filters help you to control difficult lighting conditions.
Specifications Specifications XA25 / XA20 — Values given are approximate figures. 179 System • Recording System Movies: AVCHD1 Video: MPEG-4 AVC/H.264; Audio: Linear PCM, 16 bits, 48 kHz, 2ch2 Dolby Digital 2ch MP4 Video: MPEG-4 AVC/H.264 Audio: MPEG-2 AAC-LC (2ch) Photos: DCF (Design rule for Camera File system), compatible with Exif3 Ver. 2.3 Image type: JPEG 1 2 3 Compatible with AVCHD ver. 2.0 specifications. Linear PCM is available only when the recording mode is 28 Mbps LPCM (59.
Specifications • Image Sensor 1/2.84-inch CMOS, 3,090,000 pixels Effective pixels: 2,910,000 pixels • OLED Touch Screen: 3.5 in., wide, TFT color, equivalent to 1,230,000 dots, 100% coverage, touch operation • Viewfinder: 0.24 in., wide, color, equivalent to 1,560,000 dots, 100% coverage 180 • Microphone: Stereo electret condenser microphone • Lens f=3.67-73.4 mm, F/1.8-2.8, 20x optical zoom, 8-bladed circular aperture 35 mm equivalent: 26.8 – 576 mm 28.
Specifications Terminals • HD/SD-SDI Terminal BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced HD-SDI: SMPTE 292M Video: 1080i, 720P SD-SDI: SMPTE 259M Video: 480i Embedded audio, time code (VITC/LTC) • HDMI OUT Terminal HDMI mini connector; output only • USB Terminal: mini-B receptacle, Hi-Speed USB; output only • AV OUT Terminal ∅ 3.5 mm 4-pole minijack; output only Video: 1 Vp-p / 75 Ω unbalanced Audio: –10 dBV (47 kΩ load) / 3 kΩ or less • MIC Terminal ∅ 3.
Specifications • Dimensions [W x H x D] (excluding the grip belt) Camcorder only: 109 x 84 x 182 mm (4.3 x 3.3 x 7.2 in.) Camcorder with the lens hood attached: 115 x 84 x 231 mm (4.5 x 3.3 x 9.1 in.) Camcorder with the lens hood and handle unit attached: 131 x 180 x 231 mm (5.2 x 7.1 x 9.1 in.) • Weight (camcorder with lens hood and handle unit attached): 1160 g (2.6 lb) 1155 g (2.5 lb) 182 CA-570 Compact Power Adapter • Power supply: 100 – 240 V AC, 50/60 Hz • Rated output / consumption: 8.4 V DC, 1.
Index A E Abroad, using the camcorder . . . . . . . . . . . 173 AGC (automatic gain control) limit . . . . . . . . . 65 Aperture (f number) . . . . . . . . . . . . . . . . . . 66, 68 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . . . . . . . . 146 Assignable buttons . . . . . . . . . . . . . . . . . . . . . 97 Audio equalizer . . . . . . . . . . . . . . . . . . . . . . . . 84 Audio output . . . . . . . . . . . . . . . . . . . . . . . . . 110 Audio recording level . . . . . .
Microphone directionality . . . . . . . . . . . . . . . .84 Mode switch . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Monitor delay . . . . . . . . . . . . . . . . . . . . . . . . .110 Movie format (AVCHD/MP4) . . . . . . . . . . . . . .39 Movie Uploader . . . . . . . . . . . . . . . . . . . . . . . .132 Snow (recording program) . . . . . . . . . . . . . . . Sports (recording program) . . . . . . . . . . . . . . . Spotlight (recording program) . . . . . . . . . . . . Sunset (recording program) .
USA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED STATES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
CANADA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY 186 The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon Consumer Digital Video Equipment (the “Equipment”) purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required.
USA CANON U.S.A., INC. http://pro.usa.canon.com http://pro.usa.canon.com/support Tel: (855) CINE-EOS (855-246-3367) (USA only) CANADA CANON CANADA INC. http://www.canon.ca/pro ❖ Professional Product Support / Soutien des produits professionnels Tel: (800) 667-2666 MÉXICO CANON MEXICANA, S DE RL DE CV http://www.canon.com.mx Tel: 52 (55) 5249-4905 CENTRO Y SURAMÉRICA CANON LATIN AMERICA, INC. http://www.cla.canon.com ASIA CANON HONGKONG COMPANY LTD.
