Cov-Advanced.fm Page 1 Wednesday, July 19, 2006 3:03 PM ENGLISH DIGITAL CAMERA Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Viewing Images on a TV set Customizing the Camera Advanced Camera User Guide PRINTED IN XXXX © 2006 CANON INC. Troubleshooting List of Messages Advanced Appendix Camera User Guide This guide explains camera features and procedures in detail.
Main Features Shooting Wide range 3.
Conventions Used in this Guide Icons appearing below titles indicate the modes in which the procedure can be used. Mode Dial Continuous Shooting Shooting Mode See Functions Available in Each Shooting Mode (p. 142) In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. This mark denotes issues that may affect the camera’s operation.
Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . 1 Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Please Read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . .
Switching between Focusing Modes. . . . . . . . . . . . . . . . . . . Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) . . Locking the Exposure Setting (AE Lock). . . . . . . . . . . . . . . . Locking the Flash Exposure Setting (FE Lock) . . . . . . . . . . . Switching between Metering Modes . . . . . . . . . . . . . . . . . . . Adjusting the Exposure Compensation . . . . . . . . . . . . . . . . . Shooting in Long Shutter Mode . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Images on a TV set. . . . . . . . . . . . . . . . . . . . . . . 103 Customizing the Camera (My Camera Settings) . . . . . . . 104 Changing My Camera Settings. . . . . . . . . . . . . . . . . . . . . . . 104 Registering My Camera Settings . . . . . . . . . . . . . . . . . . . . . 105 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When the power is turned on . . . . . . . . . . .
Handling Precautions Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc.
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
Warnings Equipment Do not look directly at the sun or at other intense light sources through the viewfinder that could damage your eyesight. Store this equipment out of the reach of children and infants. • Wrist strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: Dangerous if accidentally swallowed. If this occurs, contact a doctor immediately. Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide.
Battery Do not place the battery near a heat source or expose it to direct flame or heat. The battery should not be immersed in water or sea water. Do not attempt to disassemble, alter or apply heat to the battery. Avoid dropping or subjecting the battery to severe impacts that could damage the casing. Use only recommended battery and accessories. Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
Others Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working.
Equipment Do not connect compact power adapters or battery chargers to devices such as electrical transformers for foreign travel because it may lead to malfunctions, excessive heat generation, fire, electric shock or injury. Flash Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Before Using the Camera—Basic Operations Using the LCD Monitor 1 Press . The display mode changes as follows with each press. Shooting Mode ( , , or Standard (No Information) Detailed (Information View) Off ) Playback Mode ( ) No Information Standard Detailed The shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode. The LCD monitor on or off setting is retained even after the camera power is turned off.
Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET button down while turning on the power. Method 2 In a shooting/playback mode, press the FUNC./SET button for more than one second. You can change the display color by pressing the or button. The clock display will cease when the display interval is over or when you operate the FUNC./SET, MENU or shutter button or the mode dial.
LCD Monitor Brightness LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways. Changing Settings Using the Set up Menu (p. 26) Changing Settings Using the DISP. Button (Quick-bright LCD Function) You can set the LCD monitor to the brightest setting regardless of the option selected in the Set up menu by pressing the DISP. button for more than one second.* - To restore the previous brightness setting, press the DISP. button for more than one second again.
Information Displayed on the LCD Monitor Shooting Information (Shooting mode) * Spot Frame * AF Frame (p. 46) Zoom Magnification* (p. 36) Macro/Infinity (Basic Guide p. 15) ISO Speed (p. 65) Flash (Basic Guide p. 14) Shooting Method (p. 37, Basic p. 16) * * AE Lock (p. 49) 3:2 Guide* (p. 39) Grid Lines* (p. 39) • Stills: Recordable Shots • Movies: Remaining Time/ Elapsed Time * FE Lock (p. 50) * AF Lock (p. 47) Time Zone (p. 20) * Create Folder (p. 69) * * * * * Shooting Mode (pp.
If the indicator blinks orange and the camera shake icon displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Shoot using the following methods. - Set IS mode to a setting other than [Off] (p. 32). - Raise the ISO speed (p. 65). - Select a setting other than (flash off) (Basic Guide p. 14). - Attach the camera to a tripod or other device. Playback Information (Playback Mode) Standard WAVE Format Sound (p.
Detailed My Category (p. 75) Defined Playback (p. 76) Histogram Flash (Basic Guide p. 14) Macro/Infinity (Basic Guide p. 15) Metering Mode (p. 51) White Balance (p. 55) My Colors (Playback) (p. 84) Long Shutter Mode (p. 53) ISO Speed (p. 65) My Colors (Shooting) (p. 58), Color Accent /Color Swap (p. 60) Recording Pixels/Frame Rate (Movies) Image with the My Colors effect (p. 84) (p. 43) File Size Exposure Compensation (p. 52) Recording Pixels (Still Images) (p. 30) Movie Length (Movies) (p.
Histogram Function The histogram is a graph that allows you to check the brightness of the image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 52).
Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off].
Setting the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting the Home/World Time Zones 1 (Set up) Menu [Time Zone] See Menus and Settings (p. 23). 2 3 . Use the or button to select a home time zone . To set the daylight saving option, use the or button to display .
5 Use the or tion time zone button to select a destina. As in Step 3, you can set daylight saving time. 6 Time Difference from the Home Time Zone Switching to the Destination Time Zone 1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 23). 2 Use the select or button to . To change the destination time zone, use the FUNC./SET button. When you switch to the destination time zone, will display on the monitor.
Menus and Settings Menus are used to set the shooting, playback and print settings as well as such camera settings as the date/time and electronic beep. The following menus are available. FUNC. Menu Rec., Play, Print, Set up and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions. This example shows the FUNC. menu in (Auto) mode. Turn the mode dial to , , or . Press the FUNC./SET button. Use the or button to select a menu item.
Rec., Play, Print, Set up and My Camera Menus Convenient settings for shooting, playback or printing can be set with these menus. (Rec.) Menu (Set up) Menu (My Camera) Menu • This example shows the Rec. menu in (Auto) mode. • In playback mode, the Play, Print, Set up and My Camera menus display. Press the MENU button. Use the or button to switch between menus. • You can also use the zoom lever to switch between menus. Use the or button to select menu items.
Menu List FUNC. Menu Menu Item The icons shown below are the default settings. Page Menu Item p. 33 My Colors p. 58 Special Scene Mode p. 33 Metering Mode p. 51 Movie Mode p. 40 Compression (Still Image) p. 30 Exposure Compensation p. 52 Frame Rate (Movie) Long Shutter Mode p. 53 Recording Pixels (Still Image) p. 30 White Balance p. 55 Recording Pixels (Movie) Rec. Menu p. 43 p. 43 * Default setting Menu Item 24 Page Manual Mode Options Page/Topic AiAF Face Detect*/On/Off p.
*1 Default setting is 3 shots. *2 They are classified according to the following categories. People: , , or images with faces detected if [Face Detect] has been selected in [AiAF] mode. Scenery: Events: , , , , , Play Menu Menu Item Slide Show Page p. 88 Menu Item Sound Memo Page p. 86 p. 75 Rotate p. 82 p. 95 Transfer Order p. 101 Protect p. 93 Transition p. 83 My Colors p. 84 Print Menu Menu Item Page Print Select Images & Qty.
Set up Menu Menu Item * Default setting Options On/Off* Set to [On] to silence all sounds except warning sounds. (Basic p. 10) Volume Off/1/2*/3/4/5 Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound and playback sound. The volume cannot be adjusted if [Mute] is set to [On]. Start-up Vol. Adjusts the volume of the start-up sound when the camera is turned on. Operation Vol.
Clock Display 0–10*1 sec./20 sec./30 sec./1 min./2 min./3 min. Format File Numbering p. 13 You can also set it to perform a low level format (p. 29). Continuous*/ Auto Reset p. 71 Create Folder p. 69 Create New Folder Check mark (On)/ No check mark (Off) Off*/Daily/ You can also set the Auto Create time. Monday–Sunday/ Monthly Auto Rotate On*/Off Lens Retract 1 min.*/0 sec. Basic Guide p. 8 Language Video System NTSC/PAL Print Method Auto*/ Reset All p.
My Camera Menu * Default setting Menu Item Available Settings Theme Selects a common theme for each My Camera settings item. Start-up Image Sets the image displayed when the camera power is turned on. Start-up Sound Sets the sound played when the camera power is turned on. Operation Sound Sets the sound played when any button other than the shutter button is pressed. Selftimer Sound Sets the sound played 2 seconds before the shutter releases in self-timer mode.
Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. 1 (Set up) Menu [Format]. See Menus and Settings (p. 23). Select [OK] and press . To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark.
Shooting Changing the Recording Pixels and Compression (Still Images) Shooting Mode 1 FUNC. Menu * (Compression)/ * (Recording Pixels). See Menus and Settings (p. 22) * Default setting. Use the or button to select compression/recording pixels settings and press the FUNC./SET button. Approximate Values for Recording Pixels Recording Pixels Purpose* 3072 x 2304 High Printing to about A3-size pixels 297 x 420 mm (11.7 x 16.5 in.) Printing to about A4-size 210 x 297 mm (8.3 x 11.7 in.
Approximate Values for Compression Settings Compression Superfine Fine Normal Purpose High Quality Shoot higher quality images Shoot normal quality images Normal Shoot more images See Image Data Sizes (Estimated) (p. 135) See Memory Cards and Estimated Capacities (p.
Setting the Image Stabilizer Function Shooting Mode The lens shift type image stabilizer function allows you to minimize the camera shake effect (blurred images) when you shoot distant subjects that have been magnified or when you shoot in dark conditions without a flash. 1 Continuous You can check the effect of the IS mode on image blur on the LCD monitor since the IS mode runs continually. This makes it easier to compose images and focus on subjects.
Shooting in a Special Scene Mode Shooting Mode You can take an optimal picture simply by selecting the appropriate shooting mode. 1 FUNC. Menu * (Portrait). See Menus and Settings (p. 22) *Default setting. Use the or button to select a shooting mode and press the FUNC./SET button. See the Basic Guide (p. 12) for explanations of the Special Scene modes. Shooting 2 Shoot.
Red-Eye Reduction Function Shooting Mode Setting the red-eye reduction function* to [On] causes the red-eye reduction lamp to fire with the flash. *This function reduces the effect of light reflecting back from the eyes and making them appear red. 1 (Rec.) Menu [Red-Eye] [On]*/[Off]. See Menus and Settings (p. 23). *Default setting. Setting the Slow Synchro Function Shooting Mode You can shoot with the flash at slow shutter speeds.
Magnified Close-Up Shooting (Digital Macro) Shooting Mode You can shoot a subject 3 – 60 cm (1.2 in. – 2.0 ft.) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 12 x 9 mm (0.46 x 0.35 in.) at maximum zoom (approximately 4.0x). 1 FUNC. Menu Macro). * (Manual) (Digital See Menus and Settings (p. 22) *Default setting. Choose the angle of view with the zoom lever and shoot.
Using the Digital Zoom Shooting Mode You can shoot zoomed images using the combined digital and optical zooms. The focal lengths (35mm film equivalent) and characteristics are as follows. Option Focal Length On 28 – 420 mm Off 28 – 105 mm Characteristics You can shoot at a maximum zoom factor of approximately 15x using a combination of the optical and digital zoom features. Shoots without using the digital zoom. The digital zoom cannot be used when the LCD monitor is turned off.
Continuous Shooting Shooting Mode In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously at a set shooting interval until the memory card is full (smooth continuous shooting) (p. 134). *Recommended Memory Card Super high speed SDC-512MSH memory card (sold separately) newly formatted with low level formatting (p. 29). • This reflects standard shooting criteria established by Canon.
Postcard Mode Shooting Mode You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. 1 FUNC. Menu (Postcard). * (Recording Pixels) See Menus and Settings (p. 22) *Default setting. The recording pixels are set to (1600 x 1200) and the compression to (Fine). The area that will not print displays in gray. The digital zoom cannot be used in this mode.
Setting the Display Overlay Shooting Mode You can check a composition’s horizontal and vertical alignment as well as a 3:2 aspect ratio print range on the LCD monitor by using a shooting guide while shooting. Displays grid lines dividing the monitor into 9 areas, Grid Lines allowing you to check the subject’s horizontal and vertical alignment. You can check what can be printed in a composition using a 3:2 aspect ratio. The portion that will not print displays in 3:2 Guide gray.
Movie Shooting Shooting Mode The following movie modes are available. For information on the recording pixels and frame rate in each mode, refer to Changing Recording Pixels and Frame Rates (p. 43). Standard You can select the recording pixels and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p.
1 FUNC. Menu * (Standard). See Menus and Settings (p. 22) *Default setting. Use the or button to select a movie mode and press the FUNC./ SET button. In , or mode, you can change the recording pixels and frame rate (p. 43). See Changing Colors (p. 60) for the procedures for using and . 2 Shoot. Shooting Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. Pressing the shutter button fully starts recording video and sound simultaneously.
You are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 29). The card supplied with the camera may be used without further formatting. Be careful of the following while recording. - Try not to touch the microphone. - Do not press any buttons other than the shutter button. The sound that buttons make will be recorded in the movie. - The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording.
Changing Recording Pixels and Frame Rates You can change the recording pixels and frame rate when the movie mode is set to (Standard), (Color Accent) or (Color Swap). 1 FUNC. Menu * (Frame Rate)/ * (Recording Pixels). See Menus and Settings (p. 22) *Default setting. Use the or button to select recording pixels/frame rate settings and press the FUNC./SET button. Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion.
Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. The overlapping seams of several adjacent images can be joined into a single panoramic image. 1 FUNC. Menu Assist). *(Manual) / (Stitch See Menus and Settings (p. 22) *Default setting. You can select from the following two shooting directions.
3 Compose the second image so that it overlaps a portion of the first and shoot. You can retake a shot by pressing the or button and returning to the previously recorded image screen. Minor discrepancies in the overlapping portions can be corrected when the images are stitched together. 4 Repeat the procedure for additional images. A sequence may contain up to 26 images. Press the FUNC./SET button after the last shot. You cannot display the images on a TV when shooting in Stitch Assist mode.
Switching between Focusing Modes Shooting Mode Select from among the following three focusing methods. You can have the camera automatically detect Face the position of a face and use this data to set the Detect focus and exposure* while shooting. *Only in evaluative metering mode (p. 51). (No frame) 1 On The camera detects the subject and highlights the AF frames, from 9 available points, that it will use to determine the focus. Off The camera focuses using the center AF frame.
- The camera may mistakenly identify non-human subjects as a face. If this occurs, switch to the [On] or [Off] option. - When a face is not detected, images will be shot using the [On] option. In [Face Detect] mode, faces may not be detected under the following circumstances. - If the faces appear small, large, dark or bright relative to the overall composition. - If the subjects are looking sideways or lying down, or their faces are partially obscured.
Shooting with the AF Lock The AF lock can be used in the , , , or mode. 1 2 Turn on the LCD monitor. 3 Press the shutter button halfway and press the / button. Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame. The 4 icon will display and the lower indicator will light yellow. Re-aim the camera to compose the shot as desired and shoot. To Release the AF Lock Press the / button.
Locking the Exposure Setting (AE Lock) Shooting Mode You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to . The AE lock cannot be used when the flash is set to fire. 1 2 Turn on the LCD monitor. 3 Press the shutter button halfway and press the button. Focus on the part of the subject on which you wish to lock the exposure setting. 4 icon will display.
Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject. 1 2 3 Turn on the LCD monitor. 4 Press the shutter button halfway and press the button. Press the button and select Focus on the part of the subject on which you wish to lock the flash exposure setting. The flash will pre-fire and 5 will display.
Switching between Metering Modes Shooting Mode 1 FUNC. Menu * (Evaluative). See Menus and Settings (p. 22) *Default setting. Use the or button to select the metering mode and press the FUNC./SET button. Metering Methods Center Weighted Average Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Spot Meters the area within the spot AE point at the center of the LCD monitor.
Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background. 1 FUNC. Menu * (Exposure Compensation). See Menus and Settings (p. 22) *Default setting. Use the or button to adjust the exposure compensation and press the FUNC.
Shooting in Long Shutter Mode Shooting Mode You can set the shutter speed to a slow setting to make dark subjects appear brighter. 1 (Rec.) Menu [Long Shutter] [On]. See Menus and Settings (p. 23). FUNC. Menu * (Exposure Compensation) . See Menus and Settings (p. 22) *Default setting. 3 Use the speed or . Shooting 2 button to select the shutter The higher the value, the brighter the image and the lower the value, the darker the image. If you press the MENU button at this point.
The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot. Use the LCD monitor to confirm that the image was recorded at the desired brightness.
Adjusting the Tone (White Balance) Shooting Mode Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. 1 FUNC. Menu * (Auto). See Menus and Settings (p. 22) *Default setting. Use the or button to select a white balance setting and press the FUNC./SET button.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the (Auto) setting to detect correctly.
Shooting You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed.
Shooting in a My Colors Mode Shooting Mode You can change the look and feel of the pictures you take. My Colors Settings My Colors Off Records normally with this setting. Vivid Neutral Sepia B/W Positive Film Emphasizes the contrast and color saturation to record bold colors. Tones down the contrast and color saturation to record neutral hues. Records in sepia tones. Records in black and white.
1 FUNC. Menu * (My Colors Off). See Menus and Settings (p. 22) *Default setting. Use the or button to select a My Colors mode. In See Setting the Camera to a Custom Color Mode (p. 59) When not in Press the FUNC./SET button to return to the shooting screen. 2 Shoot. Setting the Camera to a Custom Color Mode 1 FUNC. Menu Colors Off) tom Color) . * (My (Cus- Shooting This mode allows you to adjust the contrast, sharpness and saturation and the color balance for red, green, blue and skin tones.
Changing Colors Shooting Mode You can shoot images with the original colors transformed. This can be performed on movies as well as still images, allowing you to enjoy photographing with image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color. Before you try to photograph important subjects, we highly recommend that you shoot trial images and check the results. If you set [Save Original] (p.
2 . The Color Accent mode will take effect. 3 . The camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color). 4 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button. 5 Press shoot. Shooting Only one color can be specified. You can use the or button to specify the range of colors that are retained.
Shooting in the Color Swap Mode Original Color (Before Swapping) 1 Desired Color (After Swapping) Stills: FUNC. Menu Swap). Movies: FUNC. Menu (Color Swap). *(Manual) * (Standard) See Menus and Settings (p. 22) *Default setting. Stills 2 . The Color Swap mode will take effect. 3 . The camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color).
4 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. Only one color can be specified. You can use the or button to specify the range of colors that are swapped. • -5: Only takes the color that you want to swap • +5: Also takes colors close to the one that you want to swap 5 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. • Only one color can be specified.
Changing the Save Method for the Original Image When shooting still images in the Color Accent or Color Swap mode, you can set whether or not to save the original image as well as the transformed one. 1 (Rec.) Menu [On]/[Off]*. [Save Original] See Menus and Settings (p. 23). *Default setting. If [On] is selected, the two images will be numbered consecutively with the altered image following the original.
Adjusting the ISO Speed Shooting Mode Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. 1 Press the button and use the ton to switch settings. or but- Shooting You can advance to the next option each time you press the button: / / / / / / / . Selecting (Auto) sets the optimal ISO speed according to the light level when shooting.
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. 1 (Set up) Menu [Off]. [Auto Rotate] [On]*/ See Menus and Settings (p. 23). *Default setting.
Checking for Focus Right After Shooting Shooting Mode You can check whether the image is in focus right after it is recorded. 1 Shoot. The recorded image displays for about 2 seconds (or the interval set with the Review function p.24). 2 Press (or ) while the Recorded Image image is displayed. Shooting The number of times the DISP. button is pressed depends upon the display settings for the LCD monitor (See below). Press the DISP.
Switching between AF Frames/ Changing the Display Position 1 Press . If you are shooting with the AiAF mode set to [Face Detect] or [On] (p. 46) and have an image with multiple AF frames selected, you can switch the focus between AF frames each time you press the MENU button. 2 Press and change the display position using the , , or button. The camera will enter the display position change mode. Change the display position using the , , or button.
Creating an Image Destination (Folder) Shooting Mode You can create a new folder at any time and the recorded images will be automatically saved to that folder. Creates a new folder the next time you shoot Create New Folder images. To create an additional folder, insert another check mark. Auto Create You can also specify a date and time if you wish to create a new folder using a shooting time after the specified date and time (p. 27). 1 (Set up) Menu [Create Folder]. See Menus and Settings (p. 23).
Setting the Day or Time for Automatic Folder Creation 1 (Set up) Menu [Create Folder]. See Menus and Settings (p. 23). 2 Select a day for the [Auto Create] option and a time in the [Time] option . displays when the specified time arrives. The symbol will cease to display after the new folder is created. Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders.
Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. 1 (Set up) Menu [File Numbering] tinuous]*/[Auto Reset]. [Con- See Menus and Settings (p. 23). *Default setting. A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing Continuous folders or memory cards.
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder.
Playback/Erasing Please also see the Basic Camera User Guide (p. 18). Magnifying Images 1 Press the zoom lever toward . will display and a magnified portion of the image will display. Images can be magnified up to a factor of approximately 10x. Approximate Location of the Displayed Area Use the , , or around the image. button to move If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and will display.
Viewing Images in Sets of Nine (Index Playback) 1 Press the zoom lever toward Up to nine images can be viewed at once. Use the , , or button to change the image selection. . Selected Image Movie Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images. Use the or button to move to the previous or next set of nine images. Hold the FUNC.
Organizing Images by Category (My Category) You can organize images into prepared categories (People, Scenery, Events, Category 1-3, To Do). At the category level, you can perform the following. Image searches (p. 76) Slide Show (p. 88) Protect (p. 93) Erase (p. 95) Configure print settings (p. 97) 1 (Play) Menu . See Menus and Settings (p. 23). In Playback mode, you can press the button to display the screen in Step 2 directly.
Jumping to Images When you have many images recorded onto a memory card, it is handy to use the six search keys below to jump over images to find the object of your search. Shot Date My Category 1 Jumps to the first image of each shooting date. Jumps to the first image in each category. Folder Jumps to the first image in each folder. Movie Jumps to a movie. By 10 images Jumps over 10 images at a time. By 100 images Jumps over 100 images at a time. In single image playback mode, press the button.
/ / / : use the or Select the search key button to select date, category, folder or movie for playback and press the FUNC./SET button. - The camera will switch to defined playback mode and play back only images corresponding to the search key. - Press the button to cancel defined playback mode. To Return to Single Image Playback Press the MENU button. Playback/Erasing The defined playback mode will be canceled under the following circumstances.
Viewing Movies Movies cannot be played in the index playback mode. 1 Display a movie and press Images with a 2 Select . icon are movies. (Play) and press . The movie will pause if you press Movie Control Panel the FUNC./SET button during playback. It will resume when you Volume Level press the button again. (Adjust with the or button) When playback ends, the movie stops at the last frame displayed. Press the FUNC./SET button to display the movie control panel.
Operating the Movie Control Panel Ends playback and returns to single image playback Print (An icon will display when a printer is connected. See the Direct Print User Guide for details.) Play Slow Motion Playback (You can use the button to slow down or the button to speed up playback.) Displays the first frame Previous Frame (Rewinds if the FUNC./SET button is held down) Next Frame (Fast Forwards if the FUNC./SET button is held down) Displays the last frame Edit (Switches to movie editing mode) (p.
Editing Movies You can delete portions of recorded movies. Protected movies and movies 1 second or less in duration cannot be edited. 1 Select (Edit) in the movie control panel and press Movie Editing Panel . The movie editing panel and the movie editing bar will display. Movie Editing Bar 2 Use the or button to select Beginning) or (Cut End) and the button to specify the cut point( ). (Cut or To check a temporarily edited movie, select (Play) and press the FUNC./SET button.
4 Select [New File] or [Overwrite] and press . [New File] saves the edited movie under a new file name. The pre-edit data is left unchanged. Note, if you press the FUNC./SET button while saving the movie, saving is canceled. [Overwrite] saves the edited movie with its original name. The pre-edit data is lost. When there is not enough space left on the memory card, only [Overwrite] can be selected. Depending on the movie's file size, it may take some time to save an edited movie.
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original 1 90° 270° (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image to rotate and press to rotate it. Cycle through the 90°/270°/original orientations with each press of the FUNC./SET button. This also can be set in the index playback mode.
Playback with Transition Effects You can select the transition effect displayed when switching between images. No transition effect. The displayed image darkens and the next image gradually brightens until it is displayed. Press the left and the right. 1 button to have the previous image display from the button to have the next image display from the (Play) Menu / */ . See Menus and Settings (p. 23). *Default setting.
Adding Effects with the My Colors Function You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p.58. 1 Vivid Lighter Skin Tone Neutral Darker Skin Tone Sepia Vivid Blue B/W Vivid Green Positive Film Vivid Red (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image and press . 3 Use the or button to select the My Colors type and press .
4 Select [OK] and press . The newly saved image transformed with the My Colors effect will be the last one in the list. To continue adding effects to other images, repeat the procedures from Step 2 onward. 5 Press and select [Yes] or [No], then press . Selecting [Yes] displays the image transformed with the My Colors effect, while [No] returns you to the Play menu. Playback/Erasing The My Colors function will not work if there is insufficient space on the memory card.
Attaching Sound Memos to Images In playback mode (including single image playback and index playback), you can attach sound memos (up to one minute) to an image. The sound data is saved in the WAVE format. 1 (Play) Menu . See Menus and Settings (p. 23). 2 Use the or button to select an image to attach a sound memo to and press . The sound memo panel will display. 3 Select (Record) and press . The elapsed time and the remaining time display. Pressing the FUNC./SET button pauses the recording.
Sound Memo Panel Exit Record Pause Play Erase Select [Erase] in the confirmation screen and press the FUNC./SET button. You cannot attach sound memos to movies. Sound memos for protected images cannot be erased.
Automated Playback (Slide Shows) Automated playback of memory card images. *Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 97). Plays all images on a memory card in order. All Images Plays images bearing a specified date in order. Date My Category – 1 Plays the images in the selected category in order. Folder Plays images in a specified folder in order. Movies Plays movie files only, in order. Stills Plays still images only, in order.
3 Select [Start] and press . The following functions are available during slide shows. - Pausing/resuming the slide show: press the FUNC./SET button - Fast forwarding/rewinding the slide show: press the or button (continue to hold the button to switch between images more rapidly) - Stopping the slide show: press the MENU button. Transition Effects You can select the transition effect used when one image is replaced by another. No transition effect.
Select a date/category/folder to play back ( / / ) 1 2 Select , or and press Use the or button to select a date/ category/folder to play back and press the button. Date My Category Folder 90 .
Selecting Images for Playback ( – ) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. 1 Select , or and press . Only the icon will display at first. When you set , the icon will change to and will display. and will change in the same way when they are set. 2 Use the or button to move between images for playback and press to select or deselect them.
Adjusting the Play Time and Repeat Settings Play Time Sets the duration that each image displays. Choose between 3*–10 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. * Default setting. Repeat Sets whether the slide show stops when all the slides have been displayed or continues until stopped. 1 2 Select [Set up] and press Select [Play Time] or [Repeat] and then the desired option. Pressing the MENU button cancels the setting. 92 .
Protecting Images You can protect important images and movies from accidental erasure. You can configure the protection settings for each image singly while viewing them. Select by Date You can protect the images from a specified date. You can protect the images in a specified Select by Category category. Select by Folder You can protect the images in a specified folder. All Images You can protect all the images on a memory card. Select 1 (Play) Menu . See Menus and Settings (p. 23).
3 Select the image, date, category or folder to protect and press . [Select] Use the or button to select an image and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can also protect images in the Protection Icon index playback mode. - Press the MENU button to complete the setting. [Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC.
Erasing Images You can erase images from a memory card. Select Erase images after selecting them one at a time. Erases images corresponding to the selected date. Select by Category Erases images in the selected category. Select by Folder Erases images in the selected folder. All Images Erases all images on a memory card. Select by Date Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function. 1 (Play) Menu .
3 Select the image, date, category or folder and press . [Select] Use the or button to select an image and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can also erase images in the index playback mode. [Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can select multiple dates, categories or folders.
Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF.
1 Set the mode dial to (Print) Menu (playback) Select a menu item . See Menus and Settings (p. 23). Proceed to Step 4 if you select [Select All Images]. 2 Select the image, date, category or folder to print and press . [Select Images & Qty.] Selection methods differ for the Print Type settings (p. 100). - (Standard)/ (Both) Use the or button to select an image, press the FUNC./SET button and use the or button to select the number of print copies (up to 99).
[Select by Date] [Select by Category] [Select by Folder] Use the or button to select a date, category or folder and press the FUNC./SET button. - Pressing the FUNC./SET button again cancels the setting. - You can select multiple dates, categories or folders. - Use the or button to confirm each date, category or folder image. 3 For the [Select by Date], [Select by Category] and [Select by Folder] options, press . 4 Select [OK] and press .
Setting the Print Style After setting the print style, select the image(s) to print. The following print settings can be selected. *Default setting Print Type Standard* Prints one image per page. Index Prints the selected images together at a reduced size in an index format. Both Date (On/Off*) Adds the date to the print. File No. (On/Off*) Adds the file number to the print. Clear DPOF data (On*/Off) 1 Prints the images in both the standard and index formats.
Images with date imprints created by (Postcard Date Imprint Mode) (p. 38) will have the date imprinted regardless of the [Date] setting. Accordingly, the date may be printed twice if [Date] is set to [On]. Dates print in the style specified in the [Date/Time] menu (p. 26). Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer.
3 Use the or button to select an image to transfer and press . Pressing the FUNC./SET button again deselects the setting. You can also select images in the index playback mode. Transfer Selection All the Images on a Memory Card 1 (Play) Menu . See Menus and Settings (p. 23). 2 Select [Mark all] and press . Selecting [Reset] cancels all transfer order settings. 3 Select [OK] and press . Images are transferred in order according to the file number. A maximum of 998 images can be selected.
Viewing Images on a TV set You can shoot or play back images on a television with the supplied AV cable. 1 2 Turn off the Camera and the TV. Connect the AV cable to the camera’s A/V OUT terminal. Slip a fingernail under the top edge of the camera's DIGITAL terminal cover, lift up and plug the AV cable in all the way. 3 Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV. Yellow VIDEO AUDIO 4 5 Turn on the TV and switch it to video mode. Turn on the camera.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and startup, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes. Changing My Camera Settings 1 (My Camera) Menu Menu item. See Menus and Settings (p. 23). 2 Select the contents you wish to set. Select [Theme] to set all to the same settings.
Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera. 1 Set the mode dial to (playback) (My Camera) Menu Menu item to register.
3 Select an image or record a sound. Start-up Image Use the or button to select the image you wish to register and press the FUNC./SET button. Start-up, Operation, Self-timer and Shutter Sounds Select (Record) and press the FUNC./SET button. After recording, select (Register) and press the FUNC./SET button. - Recording will automatically stop when the recording time elapses. - To play it, select (Play). - To exit instead of registering, press (Exit). 4 Select [OK] and press .
Troubleshooting Camera Camera will not operate. Power is not turned on. Press the power button (Basic Guide p. 10). Memory card slot/battery cover is open. Confirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 6). Battery charge insufficient to operate camera ("Change the battery pack" message displays). Insert a fully charged battery into the camera (Basic Guide p. 6). Use the AC Adapter Kit ACK-DC30 (sold separately) (p. 125).
LCD monitor Camera screen is black at start-up Incompatible image has been selected as the start-up image in the My Camera settings. Change the start-up image in the My Camera settings (p. 104) or use the supplied software program ZoomBrowser EX or ImageBrowser to restore the default settings. The display darkens. The image in the LCD monitor will darken in strong sunlight or bright light. This is a normal occurrence in devices containing CCDs and does not constitute a malfunction.
appears. This displays when using a memory card that has print settings, transfer settings or slide show image selections set by other DPOF-compliant cameras. Take note that these settings will be overwritten by those set by your camera (pp. 88, 97). Noise displays./Subject's movements are irregular. Camera automatically lightened the image displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 14). There is no effect on the recorded image.
Image seen in viewfinder vs. recorded image Usually the recorded image contains more of the scene than is seen in the viewfinder. Confirm the actual image size with the LCD monitor. Use the LCD monitor when taking close-up shots. Image is blurred or out of focus. 110 AF-assist Beam is set to [Off]. In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 24).
Subject in recorded image is too dark. Insufficient light for shooting. Set the flash to Guide p. 14). (flash on) (Basic The subject is underexposed because the surroundings are too bright. Set the exposure compensation to a positive (+) setting (p. 52). Use AE lock or use the spot metering function (pp. 49, 51). Subject is too far away for flash to reach. Shoot within correct shooting distance of the subject when using the built-in flash (p. 130). Raise the ISO speed and then shoot (p. 65).
White dots appear on the image. Light from the flash has reflected off dust particles or insects in the air. This is particularly noticeable when shooting using the wide angle. This is a phenomenon that occurs with digital cameras and does not constitute a malfunction. Eyes appear red. Light is reflected back from the eyes when the flash is used in dark areas. Set the [Red-Eye] function to [On] and shoot (p. 34).
Shooting Movies The recording time may not display properly or shooting may stop unexpectedly. The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly. Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card.
Playback Cannot play back. You attempted to play back images shot with another camera or images edited with a computer. Computer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. File name was changed with a computer or file location was changed. Set the file name or location on the file format/structure of the camera. (Refer to the Software Starter Guide for details). Movies cannot be edited.
Reading images from memory card is slow. Memory card was formatted in another device. Use a memory card formatted in your camera (p. 29). Battery/Battery Charger Battery consumed quickly. Battery life exceeded if battery loses its charge quickly at normal temperature (23 °C/73 °F). Replace the battery with a new one (Basic Guide p. 6). Battery will not charge. Battery life exceeded. Replace the battery with a new one (Basic Guide p. 6).
Printing on Direct Print Compatible Printers Cannot print. 116 Camera and printer not properly connected. Attach the camera to the printer securely with the supplied cable. Printer power is off. Turn on the printer. Incorrect print connection. In the (Set up) menu, select [Print Method] and select [Auto] (p. 27).
List of Messages The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Busy... Image is being recorded to, or read from, memory card. The playback mode is starting up. No memory card You turned on the camera without a memory card installed, or with a memory card installed in the wrong orientation (Basic Guide, p. 6).
Naming error! The file name could not be created because there is a file with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up menu, set the File Numbering option to [Auto Reset]; alternatively, save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data. Change the battery pack.
Cannot rotate You attempted to rotate an image recorded in a different camera or data type, or an image edited with a computer. Incompatible WAVE format. A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect. Cannot register this image! You attempted to register an image recorded in a different camera or a movie as a start-up image. Cannot modify image You attempted to apply a My Colors effect to a movie or an image recorded in a different camera.
Cannot complete! Could not save a part of the print, transfer or slide show settings. Unselectable image. You attempted to set the print settings for a non-JPEG image. Communication error The computer was unable to download the image due to the large amount of images (approx. 1000) stored on the memory card. Lens error, restart camera Camera detected an error while moving the lens and cut the power automatically.
Appendix Battery Handling Battery Charge The following icon and message will display. Change the battery pack Battery charge is low. Recharge it as soon as possible it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. Battery Handling Precautions Appendix Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera.
You may be able to check the charge state depending upon how the terminal cover is attached (Fig. C, D). Fig. D Fig. C Charged Battery Attach it so the is visible Spent Battery Attach it the opposite way to Fig. C. You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 – 30 °C (32 – 86 °F).
Handling the Memory Card SD Memory Card and SDHC Memory Card Write Protect Tab Write Protect Tab Slide the switch up. Writing/Erasing Possible Slide the switch down (you can protect the images and other data on the card) Writing/Erasing Impossible Cautions When Handling Appendix Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card.
Formatting Please note that formatting (initializing) an memory card erases all data, including protected images. You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.
Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK-DC30 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter. 1 2 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet.
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets Bracket (Comes with the flash) The flash charge time will lengthen as the battery charge gets weaker.
Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera’s front panel. A tripod can be used even when the flash is attached. Batteries Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints.
Camera Care and Maintenance Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use synthetic cleansers on the camera body or lens.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. DIGITAL IXUS 850 IS Camera Effective Pixels Image Sensor Lens Digital Zoom Optical Viewfinder LCD Monitor AF System Shooting Distance (From the front of the lens) Shutter Shutter Speeds Metering System 1/2.5-inch type CCD (Total number of pixels: Approx. 7.4 million) 4.6 (W) – 17.3 (T) mm (35mm film equivalent: 28 (W) – 105 (T) mm) f/2.8 (W) – f/5.8 (T) Approx. 4.0x (Up to approx.
ISO Speed*1 Auto*2, High ISO Auto*2, ISO 80/100/200/400/ 800/1600 *1 Standard Output Sensitivity, Recommended Exposure Index. *2 Camera automatically sets the optimal speed. White Balance Built-in Flash Auto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H or Custom Auto*, On*, Off * Red-eye reduction, FE Lock and slow synchro available Flash Range Normal: 50 cm – 4.0 m (1.6 – 13 ft.) (W), 50 cm – 2.0 m (1.6 – 6.6 ft.) (T) (When ISO speed is set to AUTO.
Number of Large: 3072 x 2304 pixels Recording Pixels Medium 1: 2592 x 1944 pixels (Still Images) Medium 2: 2048 x 1536 pixels Medium 3: 1600 x 1200 pixels Small: 640 x 480 pixels Postcard: 1600 x 1200 pixels Widescreen: 3072 x 1728 pixels Number of Standard, Color Accent, Color Swap: Recording Pixels 640 x 480 pixels (30 frames/sec., 15 frames/sec.) (Movies) 320 x 240 pixels (30 frames/sec., 15 frames/sec.
Interface Power Source USB 2.0 Hi-Speed (mini-B), PTP (Picture Transfer Protocol) Audio/Video output (NTSC or PAL selectable, monaural audio) Battery Pack NB-5L (Rechargeable lithium-ion battery) AC Adapter Kit ACK-DC30 0 – 40 °C (32 – 104 °F) Operating Temperatures Operating Humidity 10 – 90% Dimensions 89.5 x 58.0 x 25.1 mm (3.52 x 2.28 x 0.99 in.) (Excluding protrusions) Weight Approx. 150 g (5.29 oz.
Battery Capacity (Battery Pack NB-5L (Fully charged)) Number of Images Shot LCD Monitor ON (Based on the CIPA standard) LCD Monitor Off Approx. 270 images Approx. 600 images Playback Time Approx. 6 hours The actual figures will vary according to the shooting conditions and settings. Movie data is excluded. At low temperatures, the battery performance may diminish and the low battery icon may appear very rapidly.
Memory Cards and Estimated Capacities : Card included with the camera Recording Pixels (Large) 3072 x 2304 pixels (Medium 1) 2592 x 1944 pixels (Medium 2) 2048 x 1536 pixels (Medium 3) 1600 x 1200 pixels (Small) 640 x 480 pixels (Postcard) 1600 x 1200 pixels (Widescreen) 3072 x 1728 pixels • Compression 16MB SDC-128M SDC-512MSH 4 40 156 6 64 251 14 134 520 5 49 190 9 87 339 19 173 671 8 76 295 15 136 529 30 269 1041 13 121 471 24 217 839 46 411 1590 52 460 1777 80
Movie Recording Pixels Standard Frame Rate (640 x 480 pixels) Color Accent 6 sec. 1 min. 4 sec. 4 min. 9 sec. 2 min. 7 sec. 8 min. 14 sec. 20 sec. 3 min. 1 sec. 11 min. 42 sec. 40 sec. 5 min. 55 sec. 22 min. 53 sec. 10 sec. 1 min. 32 sec. 5 min. 59 sec. (320 x 240 pixels) Compact (160 x 120 pixels) SDC-128M SDC-512MSH 14 sec. Color Swap Fast Frame Rate (320 x 240 pixels) 16MB 1 min. 39 sec. 14 min. 29 sec. 55 min. 57 sec. * Maximum movie clip length at : 1 min., : 3 min.
SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.26 x 0.94 x 0.08 in.) Weight Approx. 2 g (0.07 oz.) MultiMediaCard Interface Compatible with MultiMediaCard standards Dimensions 32.0 x 24.0 x 1.4 mm (1.26 x 0.94 x 0.06 in.) Weight Approx. 1.5 g (0.05 oz.) Battery Pack NB-5L Type Rechargeable lithium-ion battery Nominal Voltage 3.7 V DC Typical Capacity 1120 mAh Cycle Life Approx.
Compact Power Adapter CA-DC10 (Included with the separately sold AC Adapter Kit ACK-DC30) Rated Input 100 – 240 V AC (50/ 60 Hz) Rated Output 4.3 V DC, 1.5 A Operating Temperatures 0 – 40 °C (32 – 104 °F) Dimensions 42.6 x 104.4 x 31.4 mm (1.68 x 4.11 x 1.24 in.) Weight (excluding power cord) Approx. 180 g (6.35 oz.
INDEX Numerics E 3:2 Guide .............................. 39 Erasing All Images ......................... 95 Single Images ..... Basic 3, 19 Exposure ............................... 52 Exposure Shift ....................... 42 A AC Adapter Kit ACK-DC30 . 125 AE Lock ................................. 49 AF Frame ....................... 15, 46 AF Lock.......................... 47, 48 AF-assist Beam..................... 24 AiAF ...................................... 46 Auto Play (Slide Show) .........
M S Macro........................ Basic 3, 15 Magnifying ............................. 73 Memory Card Estimated Capacities....... 134 Formatting ................ 29, 124 Handling .......................... 123 Inserting...................... Basic 6 Menu FUNC. Menu .............. 22, 24 Menu List........................... 24 Menus and Settings........... 22 My Camera Menu.............. 28 Play Menu ......................... 25 Print Menu ......................... 25 Rec. Menu .........................
V Video System...................... 103 W White Balance....................... 55 Wide Angle .................. Basic 14 Wrist Strap ..................... Basic 1 Z Zoom............................
Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting. Function Large Medium 1 Medium 2 Recording Medium 3 Pixels Small Postcard Widescreen Movie Super Fine Compression Fine Normal Frame Rate Auto Flash On Off Slow Synchro Red-Eye Macro Mode Infinity Mode AF Lock AE Lock FE Lock Single Shot Continuous Shooting 10 sec. Self-Timer Method 2 sec.
Page Function Digital Zoom Evaluative Metering Center Weighted Avg. Method Spot Exposure Compensation Exposure Shift Long Shutter White Balance My Colors ISO Speed Auto Rotate Grid Lines IS Mode (8) – – – – – – – – – – – – – – U – – – – – –(10) U U – –(10) – – – (11) (9) – – – – –(10) – –(10) – – – – (6) (6) – U – (12) (13) p.36 p.51 p.52 p.42 p.53 p.55 p.58 p.65 p.66 p.39 p.32 Setting available ( Default setting) U Setting can only be selected for the first image.
ENGLISH DIGITAL CAMERA Before Using the Camera Shooting Playback/Erasing Print/Transfer Settings Viewing Images on a TV set Customizing the Camera Advanced Camera User Guide CEL- SG1UA210 © 2006 CANON INC. Troubleshooting List of Messages Advanced Appendix Camera User Guide This guide explains camera features and procedures in detail.