User Manual

143
Mirror Lockup to Reduce Camera ShakeN
In very bright light such as at the beach or a ski slope on a sunny day,
take the picture promptly after mirror lockup.
Do not point the camera toward an intense light source, such as the sun
on a sunny day or an intense artificial light source. Doing so may
damage the image sensor or the camera’s internal components.
If you use the self-timer and bulb exposure in combination with a mirror
lockup, keep pressing the shutter button completely (self-timer delay
time + bulb exposure time). If you let go of the shutter button during the
self-timer countdown, there will be a shutter-release sound, but no
picture will be taken.
Even if <i> or <q> is set for drive mode, single shooting will take
effect.
When [z3: High ISO speed NR] is set to [Multi Shot Noise
Reduction], four continuous shots will be taken for the single picture
regardless of the [5: Mirror lockup] setting.
If 30 seconds elapse after the mirror has locked up, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.