User Manual

122 9. Additional Features
3 Select images for printing.
Single Images
z When the print type
(p. 123) is set to
[Standard] or [Both],
select an image using the
W or X arrow. You can
set the number of copies
(up to 99) to be printed
using the S or T arrow.
z When the print type
(p. 123) is set to [Index],
select an image using the
W or X arrow and mark or
remove marks from
images using the S or T
arrow. A check mark
appears on the marked image.
z You can use the same procedures to select
images in index playback (3 images). Turn the
zoom lever toward to switch between single
image playback and index playback.
Number of copies
All the Images on the CF
Card
z Turn the zoom lever
toward to switch to
index playback (3 images).
z You can set one copy of
each image to print by
pressing the SET button,
then selecting [Mark all] using the S or T
arrow, and pressing the SET button again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print copies
can be changed for each image. When [Index]
is selected, the print settings can be deleted.
For the instructions on changing settings,
please reread Step 3 from the beginning.
z You can cancel all the settings by selecting
[Clear all].
z After having marked all images or cleared all
images, you can choose a specific image and
select settings.
4 Press the MENU button.
The selection mode will turn off and the Print
Order menu will reappear.
Number of copies