User Manual

FE (Flash Exposure) lock locks the correct flash exposure setting for

any part of the scene.

While <a> is displayed on the LCD panel, press the camera’s

B> button. For cameras without a <B> button, press the

<A> (AE lock) or <7> button.

Focus on the subject.

Press the <B> button. (8)

Aim the center of the viewfinder over

the subject and press the <B>

button.

X The MR-14EX II fires a preflash, and

the flash output required for the

subject is retained in the memory.

X “FEL” will be displayed in the

viewfinder for 0.5 sec.

Each time you press the <B>

button, a preflash will be fired and the

new flash output required at that time

is retained in the memory.

7: FE LockN

If a correct exposure cannot be obtained when FE lock is performed, <Q>

blinks in the viewfinder. Move closer to the subject, open the aperture,

and perform FE lock again. You can also set a higher ISO speed and

perform FE lock again when using a digital camera.

If the target subject is too small in the viewfinder, FE lock may not be

effective.

COPY