User's Manual

Using the REMOTE B Terminal

Connect the remote controller to a compatible camera using the optional RR-10 or

RR-100 8-pin Remote Cable (10 m/100 m (32.8 ft./328 ft.), respectively). With the

REMOTE B connection, compatible cameras can receive and process multiple

simultaneous commands from the remote controller.

1 Turn off the camera.

2 Remote controller: Slide the terminal selection switch to the REMOTE B

position.

3 Remote controller: Connect one end of the 8-pin remote cable to the REMOTE

B terminal.

• Be sure to align the orientation notch on the cable’s plug with the protrusion on the

terminal.

4 Camera: Connect the other end of the 8-pin remote cable to the camera’s

REMOTE (or REMOTE B) terminal.

• Again, paying attention to the orientation notch.

NOTES

• The remote controller’s REMOTE A and REMOTE B terminals cannot be used

simultaneously. Make sure that a cable is connected only to the terminal selected with

the terminal selection switch.

To the camera’s REMOTE

(or REMOTE B) terminal

(round 8-pin jack)