Owner's Manual

151
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Powering the Camera with Household Power
Still Images Movies
Powering the camera with AC Adapter Kit ACK-E17 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Insert the coupler.
● Follow step 1 in “Inserting the Battery
Pack and Memory Card” (
=
17) to
open the cover.
● Holding the coupler with the terminals (1)
facing as shown, insert the coupler just
as you would a battery pack (following
step 2 in “Inserting the Battery Pack and
Memory Card” (
=
17)).
● Follow step 4 in “Inserting the Battery
Pack and Memory Card” (
=
18) to
close the cover.
3
Connect the adapter to the coupler.
● Open the cover and insert the adapter
plug fully into the coupler.
4
Connect the power cord.
● Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
● Turn the camera on and use it as desired.
● When nished, turn the camera off and
unplug the power cord from the outlet.
3
Turn the TV on and switch to
external input.
● Switch the TV input to the external input
you connected the cable to in step 2.
4
Turn the camera on.
● Press the [ ] button to turn the camera
on.
● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
● When nished, turn off the camera and
TV before disconnecting the cable.
● Touch-screen operations are not supported while the camera is
connected to a television.
● When the camera and TV are connected, you can also shoot
while previewing shots on the larger screen of the TV. To shoot,
follow the same steps as when using the camera screen.
However, magnifying images
(
=
100) is not available.