Before Use Basic Guide Advanced Guide Camera User Guide ●● Make sure you read this guide, including the “Safety Precautions” (= 13) section, before using the camera. ●● Reading this guide will help you learn to use the camera properly. ●● Store this guide so that you can conveniently access it in the future. 1 2 3 4 5 6 7 8 9 10 ●● Click the buttons in the lower right to access other pages. : Next page : Previous page : Return to the page you were viewing when you clicked a link.
Before Use Compatible Memory Cards The following memory cards (sold separately) can be used, regardless of capacity. Before Use Basic Guide Advanced Guide ●● SD memory cards*1 Initial Information ●● SDXC memory cards* * 1 2 *1 Package Contents *2 Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer.
Part Names Before Use Basic Guide Advanced Guide (1) LCD monitor / Touch screen* (2) Focal plane mark (3) (12) [ [ Hot shoe (13) [ (AF Frame adjustment)] / (Magnify)] button (Menu)] button (Information)] button (19) Lens release button (4) Flash sync contacts (14) [ Front dial (20) Lens mount (5) Indicator (3) Remote control sensor (21) External microphone IN terminal (6) Speaker (ISO speed)] / [ (15) [ Up button (4) EF-M lens mount index (22) Digital terminal (7) Movie button
Lens Conventions Used in this Guide EF-M Lens (Lens with no focus mode switch or image stabilizer switch) Before Use Basic Guide ●● In this guide, icons are used to represent the corresponding camera buttons and dials on which they appear or which they resemble. Advanced Guide ●● The following camera buttons and controls are represented by icons. 1 2 3 4 5 6 7 8 9 10 ●● Shooting modes and on-screen icons and text are indicated in brackets.
Stabilizing the Image..............................................................22 Table of Contents Trying the Camera Out............................................................ 23 Holding the Camera....................................................................23 Shooting in Scene Intelligent Auto Mode....................................23 Viewing.......................................................................................25 Erasing Images...........................................
Still Images.............................................................................38 Movies....................................................................................38 Scene Icons................................................................................39 On-Screen Frames.....................................................................40 Adding Artistic Effects.............................................................53 Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect)...
Adjusting White Balance.............................................................65 Custom White Balance...........................................................65 Manually Correcting White Balance.......................................66 Using Your Favorite Shades (Picture Style)...............................67 Adjusting Picture Styles..........................................................68 Saving Customized Picture Styles.........................................69 Shooting Range and Focusing...
Applying Filter Effects............................................................... 111 Correcting Red-Eye.................................................................. 112 Viewing by Date......................................................................97 Browsing and Filtering Images................................................ 97 Navigating through Images in an Index......................................97 Touch-Screen Operations.......................................................
Sending Images Automatically (Image Sync)........................ 131 Activating the Cleaner..........................................................143 Cleaning Manually................................................................143 Checking Certification Logos....................................................144 Setting Copyright Information to Record in Images..................144 Deleting All Copyright Information........................................144 Adjusting Other Settings...............
Printing Images..................................................................... 160 Easy Print.................................................................................160 Configuring Print Settings.........................................................161 Cropping Images before Printing..........................................162 Choosing Paper Size and Layout before Printing................162 Available Layout Options......................................................
Network Functions................................................................194 Power Supplies....................................................................195 Dimensions and Weight........................................................195 Operation Environment........................................................195 Number of Shots per Memory Card.....................................195 Recording Time per Memory Card.......................................196 Internal Flash Range Guide........
Common Camera Operations ●● Erase images -- = 105 Before Use Basic Guide Shoot ●● Use camera-determined settings (Auto Mode, Hybrid Auto Mode) -- = 35, = 37 ●● Use the effects of your choice (Creative Assist) -- = 48 ●● Blur the background; keep the background in sharp focus (Av Mode) -- = 83 ●● Freeze movement; blur movement (Tv Mode) -- = 82 ●● Add effects to photos (Creative Filters) -- = 52 ●● Shoot continuously (Continuous Shooting) -- = 42 ●● Shoot in locations where flash is prohibited (Flash Off)
Safety Precautions ●● Before using the product, ensure that you read the safety precautions described below. Always ensure that the product is used correctly. ●● The safety precautions noted here are intended to prevent you and other persons from being injured or incurring property damage. ●● Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death. ●● Do not trigger the flash in close proximity to people’s eyes.
●● Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the product in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. ●● Do not allow the camera to maintain contact with skin for extended periods.
●● Do not leave any dedicated battery packs near pets. Pets biting the battery pack could cause leakage, overheating, or explosion, resulting in product damage or fire. ●● If your product uses multiple batteries, do not use batteries that have different levels of charge together, and do not use old and new batteries together. Do not insert the batteries with the + and – terminals reversed. This may cause the product to malfunction.
Basic Guide Initial Preparations Basic Guide Prepare for shooting as follows. Advanced Guide Attaching the Strap Basic Operations Before Use 1 2 3 4 5 6 7 8 9 10 ●● Attach the included strap to the camera as shown. ●● On the other side of the camera, attach the strap the same way. Basic information and instructions, from initial preparations to shooting and playback Charging the Battery Pack Before use, charge the battery pack with the included charger.
●● LC-E17E: Plug the power cord into the charger and then plug the other end into a power outlet. LC-E17E ●● The charging lamp turns orange, and charging begins. ●● When charging is finished, the lamp turns green. 3 Remove the battery pack. ●● After unplugging the battery charger, remove the battery pack by pushing it in (1) and up (2). ●● Do not touch the battery charger plug for approximately 5 sec. after removing the charger from the outlet.
3 Check the card’s write-protect tab and insert the memory card. ●● Recording is not possible on memory cards with a write-protect tab when the tab is in the locked position. Slide the tab to the unlocked position (1). ●● Insert the memory card with the label (2) facing as shown until it clicks into place. ●● Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera. 4 Close the cover.
4 Finish the setup process. ●● Press the [ ] button when finished. After a confirmation message, the setting screen is no longer displayed. ●● To turn off the camera, press the ON/OFF button. ●● Unless you set the date, time, and home time zone, the [Date/ Time] screen will be displayed each time you turn the camera on. Specify the correct information. ●● To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then choose [ ] by pressing the [ ][ ] buttons or turning the [ ] dial.
Display Language Attaching a Lens Change the display language as needed. 1 Enter Playback mode. ●● Press the [ 2 ] button. Access the setting screen. ●● Press and hold the [ ] button, and then press the [ ] button. 3 Set the display language. ●● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose a language, and then press the [ ] button. ●● Once the display language has been set, the setting screen is no longer displayed.
●● To protect the lens, keep the lens cap on when the camera is not in use. Detaching a Lens ●● Make sure the camera is off. ●● While pressing the lens release button (1), turn the lens as shown by the arrow (2). ●● Turn the lens until it stops and then detach it (3). ●● Attach the lens cap to the detached lens. ●● Minimizing Dust -- When changing lenses, do it quickly in a place with minimal dust. -- When storing the camera without a lens attached, be sure to attach the body cap to the camera.
●● If using a lens that is heavier than the camera, make sure support is provided for the lens while carrying and shooting. ●● Using adapters may extend the minimum shooting distance of the lens or change its maximum magnification ratio or shooting range. ●● If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part. ●● The focus preset function on some super telephoto lenses is unavailable. Also, the power zoom function of lens EF35–80mm f/4–5.
Shooting in Scene Intelligent Auto Mode Trying the Camera Out Still Images Movies Follow these instructions to turn the camera on, shoot still images or movies, and then view them. For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ●● Press the ON/OFF button.
4 Shoot. Shooting Still Images 1) Focus. ●● Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Recording Movies 1) Start recording. ●● Press the Movie button to begin recording. [ Rec] is displayed with the elapsed time. Before Use Basic Guide Advanced Guide ●● Displays black bars on the top and bottom edges of the screen. The black bars indicate image areas not recorded.
3 Viewing After shooting still images and movies, you can view them on the screen as follows. 1 Enter Playback mode. ●● Press the [ ●● Playback now begins, and after the movie is finished, [ ] is displayed. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ●● To adjust the volume during playback, press the [ ][ ] buttons. ] button. ●● Your last shot is displayed. 2 Play movies. ●● Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again.
Erasing Images Before Use You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. 1 Advanced Guide Choose an image to erase. ●● Press the [ ][ ] buttons or turn the [ dial to choose an image. 2 Basic Guide ] 1 2 3 4 5 6 7 8 9 10 Erase the images. ●● Press the [ ] button. ●● After [Erase?] is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [Erase], and then press the [ ] button. ●● The current image is now erased.
Advanced Guide 1 Camera Basics Other basic operations and more ways to enjoy your camera, including shooting and playback options On/Off Before Use Basic Guide Shooting Mode Advanced Guide ●● Press the ON/OFF button to turn the camera on and prepare for shooting. 1 2 3 4 5 6 7 8 9 10 ●● To turn the camera off, press the ON/OFF button again. Playback Mode ●● Press the [ ] button to turn the camera on and view your shots. ] button again to go to ●● Press the [ shooting mode.
Power-Saving Features (Auto Power Down) As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity. Power Saving in Shooting Mode The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the camera turns itself off.
Adjusting the Angle of the LCD Monitor Shooting Modes Use the mode dial to access each shooting mode. (1) (4) You can adjust the screen angle and orientation to suit the scene or how you are shooting. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Tilting the Screen Downward (5) (2) (3) (1) (2) (3) Scene Intelligent Auto Mode/ Hybrid Auto Mode Fully automatic shooting, with camera-determined settings (= 35, = 37).
●● Keep the screen closed when the camera is not in use. ●● Do not try to open the screen beyond the angles described, as this may damage it. ●● Go to the Menu (= 32) and set [Reverse Disp.] to [Off] on the [ 1] tab to turn off the mirror-image function. Shooting Display Options Press the [ ] button to switch between displaying the grid lines and level. This can be defined in more detail on the [ 1] tab, under [Shooting information display] (= 87).
Using the Quick Setting Menu Commonly used functions can be configured in the (Quick Setting) menu. Note that menu items and options vary depending on the shooting mode (= 181) or playback mode (= 188). 1 Access the ●● Press the [ 2 menu. ] button. Choose a menu item. ●● Press the [ ][ ] buttons to choose a menu item (1). ●● Available options (2) are shown at the bottom of the screen. 3 Choose an option. ●● Press the [ ][ ] buttons or turn the [ ][ ] dials to select an option.
4 Using the Menu Screen Configure a variety of camera functions through the menu screen as follows. 1 2 ] button. 5 ] ●● There are two kinds of tabs: System tabs (1) related to shooting [ ], playback [ ], settings [ ] and more, and the individual page tabs (2) under each system tab. This guide refers to both tab types together in the text (example: the “[ 1] tab”). 3 Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Finish the setup process. ●● When finished, press the [ return to option selection.
Touch-Screen Operations On-Screen Keyboard ●● To access tabs, press the [ ] button to access the menu, touch a system tab, and then a page tab to select a menu tab. ●● Touch the desired setting to select it and then touch it again. ●● When finished, touch the option to return to the menu screen. ●● To configure menu items for which options are not shown, first touch the menu item to access the setting screen. To return to the previous ].
●● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to select characters and icons. Press the [ ] button to make entries. Turn ] dial to move the cursor directly between characters. the [ ] button to go back to the previous screen. Press the [ Indicator Display The indicator on the back of the camera (= 3) lights up or blinks depending on the camera status.
2 Auto Mode / Hybrid Auto Mode Shooting with CameraDetermined Settings Before Use Basic Guide For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Advanced Guide 1 2 3 4 5 6 7 8 9 10 Shooting (Scene Intelligent Auto) Still Images Convenient mode for easy shots with greater control over shooting 1 Movies Turn the camera on. ●● Press the ON/OFF button. 2 Enter [ ] mode. ●● Set the mode dial to [ ].
4 Shoot. Shooting Still Images 1) Focus. ●● Press the shutter button halfway. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Recording Movies 1) Start recording. ●● Press the movie button. Recording begins, and [ Rec] is displayed with the elapsed time. Before Use Basic Guide Advanced Guide ●● Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.
Shooting in Hybrid Auto Mode Still Images Movies You can make a short movie of the day just by shooting still images. The camera records 2 – 4-second clips of scenes before each shot, which are later combined in a digest movie. 1 Enter [ ] mode. ●● Follow step 2 in “Shooting (Scene Intelligent Auto)” (= 35), and choose [ ]. 2 Compose the shot. ●● Follow steps 3 – 4 in “Shooting (Scene Intelligent Auto)” (= 35) to compose the shot and focus.
Still Images ●● An orange AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway. No picture is taken, even if you press the shutter button all the way down. ●● When no people or subjects are detected, when the subject is dark or has no contrast, or in extremely bright conditions, it may take longer to achieve focus, or correct focus may not be achieved. ●● A blinking [ ] icon warns that images are more likely to be blurred by camera shake.
●● Audio is recorded in stereo. ●● The focus automatically adjusts while shooting movies, which may cause the sound of the lens operating to be recorded. Using an external microphone (sold separately) may help reduce these lens sounds. If you do not want to record sound, go to the menu (= 32), select the [ 5] tab, and set [Sound recording] to [Disable]. ●● Go to the Menu (= 32), select the [ 5] tab, and set [Movie Servo AF] to [Disable] to keep the focus fixed during movie recording.
On-Screen Frames Common, Convenient Features Still Images Movies A variety of frames are displayed once the camera detects subjects you are aiming the camera at. ●● A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject. The frame follows moving subjects within a certain range to keep them in focus. ●● Press the shutter button halfway to focus. Once the scene is in focus, the frame will turn green.
Shooting by Touching the Screen (Touch Shutter) ●● Once you start the self-timer, the lamp will blink and the camera will play a selftimer sound. ●● Two seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.) ●● To cancel shooting after you have triggered the self-timer, press the ] button. [ ●● To restore the original setting, choose [ in step 1.
Continuous Shooting Still Images Movies In [ ] mode, hold the shutter button all the way down to shoot continuously. For details on the continuous shooting speed, see “Drive, Self-timer System” (= 192). 1 Configure the setting. ●● Press the [ ] button, choose [ ] in the menu, and then choose [ ] (= 31). ●● Once the setting is complete, [ displayed. 2 ] is Shoot. ●● Hold the shutter button all the way down to shoot continuously.
If selecting resolution based on paper size, use the following table as a guide (when using 3:2 aspect ratio). Image Customization Features A2 (16.5 x 23.4 in.) A3 (11.7 x 16.5 in.) Changing Image Quality A4 (8.3 x 11.7 in.) Still Images Movies You can select the resolution (size) and quality (compression ratio) of your recorded images from a combination of 8 types. You can also define whether to save RAW images (= 43) or not.
●● Press the [ ] button, and then choose [ ] in the menu (= 31). ●● If you want to save only the RAW image, select [ ]. ●● To save both a JPEG and a RAW image, select your desired image quality in the setting screen and then press the ] button to add a [ ] to [RAW]. [ To go back to the original save method, remove the [ ] from [RAW]. ●● When transferring RAW images (or RAW and JPEG images recorded together) to a computer, always use the dedicated software “EOS Utility” (= 158).
Changing the Aspect Ratio Changing Movie Image Quality Still Images Movies Change the image aspect ratio (ratio of width to height) as follows. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 31). ●● Once the setting is complete, the screen aspect ratio will be updated. Before Use Still Images Movies You can set the quality (image size and frame rate) of movies. The frame rate (number of frames recorded per second) is determined by your video format settings (= 139).
Video format set to [PAL] Image Quality Resolution Frame Rate Details 1920 x 1080 25.00 fps For shooting in Full HD 1280 x 720 50.00 fps For shooting in HD 640 x 480 25.00 fps For shooting in standard definition ●● [ ] and [ ] will display black bars on the left and ], [ ], [ ], right sides of the screen. [ ], and [ ] will display black bars on the top and [ bottom of the screen. The black bars indicate image areas not recorded.
Changing the Image Display Period after Shots Customizing Camera Operation Still Images Customize shooting functions on the [ ] tab of the menu screen as follows. For instructions on menu functions, see “Using the Menu Screen” (= 32). Preventing the Red-Eye Reduction Lamp from Lighting Up Still Images Movies You can deactivate the red-eye reduction lamp that lights up to reduce red-eye when the flash is used in low-light shots. 1 Access the [Flash Control] screen.
3 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions Shooting with Your Favorite Settings (Creative Assist) Even if you don’t know much about photography, you can select from onscreen options written in plain English to change the brightness, blur the background, and take pictures that are all your own. You can also save your favorite settings and easily load them back in later.
1 Enter [ ] mode. ●● Set the mode dial to [ 2 ]. You can save your favorite settings and reload them later for repeated use. Configure the settings. ●● Press the [ ] button, and then press the [ ][ ] buttons to choose the option. Press the [ ][ ] buttons or turn the [ ] [ ] dials to change options (= 31). ●● Once everything is set up, press the ] button to return to the shooting [ screen. 3 Saving/Loading Settings Shoot. ●● When shooting with flash, [Background] cannot be set.
Loading Playing Back Images ●● Follow step 1 in “Shooting with Your Favorite Settings (Creative Assist)” (= 49) to select [ ]. ●● When displaying images shot in [ ] mode, press the [ ] button to display the screen shown to the left, letting you view the settings used when the picture was taken. ●● Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ][ ] buttons or turn the [ ][ ] dials to select the settings to load. ●● Press the [ settings.
Shooting Flowers and Small Objects (Close-up) Specific Scenes Still Images Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. 1 Enter [ 2 ●● Take pictures of flowers and other objects from close up to make them look huge in your photos. ] mode. ●● Set the mode dial to [ Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ●● To make small things appear even larger, use a macro lens (sold separately). ]. Choose a shooting mode.
●● Subjects appear larger in [ ] mode compared to other modes. ●● In [ ] and [ ] modes, shots may look grainy because the ISO speed (= 62) is increased to suit the shooting conditions. ●● Because the camera will shoot continuously in [ ] mode, hold it steady while shooting. ●● In [ ] mode, excessive motion blur or certain shooting conditions may prevent you from obtaining the desired results. ●● When you use a tripod for evening scenes, shooting in [ instead of [ ] mode will give better results (= 35).
Shooting High-Contrast Scenes (High Dynamic Range) Still Images Choose [ ]. ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ]. 2 Shoot. Before Use ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ]. Movies Three consecutive images are captured at different brightness levels each time you shoot, and the camera combines image areas with optimal brightness to create a single image.
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect) Still Images Movies Shoot with the distorting effect of a fish-eye lens. 1 Choose [ ●● A preview is shown of how your shot will look with the effect applied. ●● A preview is shown of how your shot will look with the effect applied. Shoot. 1 2 3 4 5 6 7 8 9 10 Movies You can shoot pictures with a light, soft watercolor-like effect. 1 Choose [ ]. ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ].
Shots Resembling Miniature Models (Miniature Effect) Still Images Movies Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. 1 Choose [ ]. ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ].
Shooting with a Toy Camera Effect (Toy Camera Effect) Still Images Movies This effect makes images resemble shots from a toy camera by vignetting (darker, blurred image corners) and changing the overall color. 1 Choose [ ]. ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ]. 2 Choose a color tone. ●● Turn the [ tone. ] dial to choose a color ●● A preview is shown of how your shot will look with the effect applied. 3 Shoot.
Shooting in Monochrome (Grainy B/W) Still Images Shooting Movies in Movie Mode Movies You can take pictures with a rough monochrome feel. 1 Choose [ ]. ●● Follow steps 1 – 2 in “Image Effects (Creative Filters)” (= 52) and choose [ ]. 2 Choose an effect level. ●● Turn the [ level. ] dial to choose an effect ●● A preview is shown of how your shot will look with the effect applied. 3 Shoot. Still Images 1 Enter [ Before Use Movies Advanced Guide ] mode.
Shooting Still Images during Movie Recording Still Images Movies Shoot still images during movie recording as follows. 1 While shooting a movie, focus on a subject. ●● Press the shutter button halfway down to readjust the focus and exposure. (The camera will not beep.) ●● Movie recording will continue. 2 Shoot. ●● Press the shutter button all the way down. ●● Your shot will be recorded.
Turning Off the Wind Filter Sound Settings Still Images Movies Adjusting the Recording Volume Noise caused by strong wind can be reduced. However, the recording may sound unnatural when this option is used when there is no wind. You can turn off the wind filter for these situations. ●● Follow step 1 in “Adjusting the Recording Volume” (= 59) to display the [Sound recording] screen.
4 P Mode More discerning shots, in your preferred shooting style Shooting in Program AE ([P] Mode) Still Images ●● [ ]: Program AE; AE: Auto Exposure ●● Before using a function introduced in this chapter in modes other than [ ], make sure the function is available in that mode (= 177). Basic Guide Movies Advanced Guide 1 2 3 4 5 6 7 8 9 10 You can customize many function settings to suit your preferred shooting style. 1 Enter [ ] mode. ●● Set the mode dial to [ ].
Adjusting Shooting Functions from a Single Screen Image Brightness (Exposure) Basic Guide The INFO. Quick Control screen lets you quickly adjust options using a single screen of functions. 1 Access the INFO. Quick Control screen. ●● Press the [ ] button repeatedly to display the INFO. Quick Control screen. 2 Before Use Select a function to adjust.
●● AE: Auto Exposure ●● After the exposure is locked, you can adjust the combination ] dial of shutter speed and aperture value by turning the [ (Program Shift). ●● In [ ] mode, exposure is locked when you press the shutter ][ ][ ] modes, the exposure is not button halfway. In [ locked when you press the shutter button halfway and is not determined until the moment you shoot the picture. ●● This can also be adjusted by choosing [Metering mode] on the [ 3] tab of the menu (= 32).
●● To view the automatically determined ISO speed when you have set the ISO speed to [AUTO], press the shutter button halfway. ●● Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject and camera shake in some shooting conditions. ●● Choosing a higher ISO speed will increase shutter speed, which may reduce subject and camera shake and increase the flash range. However, shots may look grainy.
Auto Correction of Brightness and Contrast (Auto Lighting Optimizer) Still Images Shooting Bright Subjects (Highlight Tone Priority) Movies If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 31). ●● Depending on the shooting conditions, noise may increase.
Custom White Balance Image Colors Before Use For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. Adjusting White Balance Still Images Movies By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (=31).
●● If the exposure obtained in step 1 is too bright or dark, a correct white balance may not be obtained. ●● White data can be obtained by shooting a white subject, no matter what the current white balance settings are. ●● A message will appear if you use an image in step 3 that is not suitable for loading white data. Choose [Cancel] to select another image. Choose [OK], and the chosen image will be used to load white data, although this may not produce a suitable white balance.
Using Your Favorite Shades (Picture Style) Still Images User Define Movies Picture Styles allow you to use your preferred color hues in defined picture and subject conditions. There are 6 types of Picture Styles available and all are fully adjustable. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 31). Auto The color tone will be adjusted automatically to suit the scene.
Adjusting Picture Styles The following settings can be adjusted for each Picture Style. Sharpness Contrast Saturation*1 Color tone*1 Filter effect*2 Toning effect* *1 Not available in [ *2 Only available in [ 2 Adjusts the sharpness of the subject. Lower values produce softer (more blurred) effects; higher values produce sharper results. Adjusts the contrast. Lower values produce weaker contrast; higher values produce stronger contrast. Adjusts the color saturation in the image.
Saving Customized Picture Styles Basic styles like [ ] and [ ] can be adjusted to your liking and saved for later. You can save multiple Picture Styles with different settings for parameters such as sharpness and contrast. 1 Select a Picture Style to save. ●● Follow the steps in “Using Your Favorite Shades (Picture Styles)” (= 67) to select [ ], [ ] or [ ].
●● You can change the frame’s position (= 71). To compose shots so that subjects are positioned at the edge or in a corner without changing the frame position, first aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down (Focus Lock).
Choosing Subjects to Focus On (Touch AF) Still Images Movies You can shoot after the camera focuses on your selected subject, person’s face, or location shown on the screen. 1 Choose a subject, a person’s face, or a location to focus on. ●● Touch the subject or person on the screen. ●● When the AF frame mode is set to ], an AF frame is displayed where [ you touched.
Shooting with Servo AF Still Images Movies This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway. 1 Configure the setting. ●● Press the [ ] button, choose [ONE SHOT], and then choose [SERVO] on the menu (= 32). 2 Focus. ●● Press the shutter button halfway to focus. A green AF frame will be displayed.
Changing the Focus Setting Fine-tuning Focus Still Images Before Use Movies You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway. ●● Press the [ ] button, choose [Continuous AF] on the [ 2] tab, and then choose [On] (= 32).
5 Shooting in Manual Focus Mode Still Images Movies When focusing is not possible in AF mode, use manual focus. Magnifying the screen display will make it easier to focus. 1 Choose [ ]. ●● Press the [ ] button if you have an EF-M lens attached. ●● If you have a non-EF-M lens, turn off the camera, set the lens switch to [MF], and then turn the camera back on. ●● [MF] is displayed. 2 ●● Press the [ ] button. Select the area to magnify.
Auto Flash Before Use Fires automatically in low-light conditions. On Changing the Flash Mode Still Images Movies Raise the flash. Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range. ●● In [ ] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should turn off image stabilization when using a tripod or other means to secure the camera (= 78).
Adjusting the Flash Exposure Compensation Still Images Shooting with the FE Lock Movies Just as with regular exposure compensation (= 61), you can adjust the flash exposure from –2 to +2 stops, in 1/3-stop increments. ●● Raise the flash, press the [ ] button and immediately turn the [ ] dial to choose the compensation level, and then press the [ ] button. ●● The correction level you specified is now displayed.
Changing the Flash Timing Resetting Flash Settings Still Images Movies Change the timing of the flash and shutter release as follows. ●● Press the [ Control] on the [ flash settings]. 2nd curtain Still Images Movies You can reset the internal flash settings to their defaults. ] button, choose [Flash 3] tab, choose [Built-in ●● Choose [Shutter Sync.], and then choose the desired option (= 32). 1st curtain Before Use The flash fires immediately after the shutter opens.
Other Settings ●● Lenses with built-in image stabilization have “IS” in their names. IS stands for Image Stabilizer. Changing the IS Mode Settings Still Images Movies If you have an EF-M lens with an image stabilization function, image stabilization can be adjusted in the menu. 1 Access the setting screen. ●● Press the [ ] button, choose [IS Settings] on the [ 2] tab, and then press the [ ] button (= 32). 2 Configure the setting. ●● Choose [IS Mode], and then choose the desired option (= 32).
Lens Peripheral Illumination/Chromatic Aberration Correction Still Images Movies The unique properties of a lens may cause vignetting or color bleeding around the contours of the subject. These phenomena can be corrected. The camera comes with around 35 lenses worth of peripheral illumination/ chromatic aberration correction data. Use the EOS Utility software to view the lens settings available; if your camera has no data for your lens, you can add it to the camera.
Changing the Noise Reduction Level Still Images Movies You can choose from 3 levels of noise reduction: [Standard], [High], [Low]. This is particularly effective when shooting at high ISO speeds. ●● Press the [ ] button, choose [High ISO speed NR] on the [ 4] tab, and then choose the desired option (= 32).
Reducing Noise at Slow Shutter Speeds Still Images Before Use Movies The camera can reduce the noise that occurs during long exposures at shutter speeds of 1 second or slower. Basic Guide Advanced Guide ●● Press the [ ] button, choose [Long exp. noise reduction] on the [ 4] tab, and then choose the desired option (= 32). 1 2 3 4 5 6 7 8 9 10 OFF (Disable) Do not perform noise reduction during long exposures.
5 Tv, Av, M, and C Modes Specific Shutter Speeds ([Tv] Mode) Still Images Basic Guide Movies Advanced Guide 1 2 3 4 5 6 7 8 9 10 Set your preferred shutter speed before shooting as follows. The camera automatically adjusts the aperture value to suit your shutter speed. For details on available shutter speeds, see “Shutter” (= 192). 1 Take smarter, more sophisticated shots, and customize the camera for your shooting style Enter [ ] mode. ●● Set the mode dial to [ 2 ]. Set the shutter speed.
Depth-of-Field Preview Specific Aperture Values ([Av] Mode) Still Images Movies Set your preferred aperture value before shooting as follows. The camera automatically adjusts the shutter speed to suit your aperture value. Aperture values allowed differ depending on the lens. 1 Enter [ Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ] mode. ●● Set the mode dial to [ 2 The aperture is open when not shooting with the camera. Its size changes only at the instant a picture is taken.
Specific Shutter Speeds and Aperture Values ([M] Mode) Still Images Movies Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure. For details on available shutter speeds, see “Shutter” (= 192). Aperture values allowed will differ depending on the lens. 1 Enter [ ] mode. ●● Set the mode dial to [ 2 ]. Configure the setting. ●● Turn the [ speed (1).
Long (Bulb) Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter button. 1 Activate bulb shooting. ●● Follow steps 1 – 2 in “Specific Shutter Speeds and Aperture Values ([M] Mode)” (= 84) and set the shutter speed to [BULB]. 2 Shoot. ●● The exposure lasts as long as the shutter button is pressed. The elapsed exposure time will be displayed on the LCD monitor during shooting.
Specific Shutter Speeds and Aperture Values Still Images Movies Follow these steps to set your preferred shutter speed, aperture value and ISO speed. For details on available shutter speeds, see “Shutter” (= 192). Aperture values allowed differ depending on the lens. 1 Enter [ ] mode. ●● Set the mode dial to [ ]. ●● Press the [ ] button, choose [ ] in the menu, and then choose [ ] (= 31).
Customizing Controls and Display Customizing Display Information You can define which screens are shown when the [ ] button is pressed in the shooting screen. You can also customize the data displayed by the screens. 1 Access the setting screen. ●● Choose the [ 1] tab, select [Shooting information display], and then choose [Display switching] and press the [ ] button (= 31). 2 Configure the settings.
Setting Up Advanced Camera Functions Function type The [ 1] tab of the menu (= 32) lets you customize various camera functions to suit your picture-taking preferences. Frequently used functions can also be added to the front dial, control dial, and buttons. 1 ISO expansion Select a function type. ●● Press the [ ] button and choose the [ 1] tab (= 32). ●● Press the [ ][ ] buttons or turn the [ ] dial to choose the function type (Exposure, AF, Other), and then press the [ ] button.
●● Choose [Clear All Custom Func. (C.Fn)] in step 1 and press the [ ] button to remove all the changed functions on the [ 1] tab and restore it to default. ●● Even with [ISO expansion] set to [1:On], [H] cannot be selected if [Highlight tone priority] is set to [D+] (= 64). ●● Safety shift is disabled when the flash fires. ●● The AF-assist beam is light from the lamp (front) that turns on when the shutter button is pressed halfway in dark areas to help with focusing.
●● To restore the [ ] button, [ ]([ ]) button, and movie button ], [ ] and [ ] respectively. to their defaults, choose [ ] button, ●● If you don’t want to add functions to the [ ], [ ] and [ ] [ ]([ ]) button, and movie button, choose [ respectively. ] button, [ ]([ ]) button and ●● Icons labeled with [ ] in the [ movie button assignment screen indicate that the function is not available in the current shooting mode or under current function conditions.
●● To edit saved settings (except their shooting mode), choose [ ], change the settings, and then repeat steps 2 – 3. These setting details are not applied in other shooting modes. ●● To reset saved settings to their defaults, choose [Clear settings] in step 2, press the [ ] button, and then choose [OK] and press the [ ] button. Saving Commonly Used Shooting Menu Items (My Menu) Still Images Movies You can save up to six commonly used shooting menu items on the [ 1] tab.
3 Rearrange menu items as needed. Before Use ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Sort], and then press the [ ] button. Basic Guide ●● Choose a menu item to move (either press the [ ][ ] buttons or turn the [ dial), and then press the [ ] button. Advanced Guide ] 1 2 3 4 5 6 7 8 9 10 ●● Press the [ ][ ] buttons or turn the [ ] dial to change the order, and then press the [ ] button. ●● Press the [ ] button.
6 Before Use Still Images ] button to ●● It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Enter Playback mode. ●● Press the [ Have fun reviewing your shots, and browse or edit them in many ways Movies After shooting images or movies, you can view them on the screen as follows.
3 Play movies. ●● To start playback, press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again. 4 Before Use ●● To view the next image, drag right to left across the screen, and to view the previous image, drag left to right. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Adjust the volume. ●● Press the [ volume. ][ ] buttons to adjust the ●● To adjust the volume when the volume indicator (1) is no longer displayed, press the [ ][ ] buttons.
●● To stop movie playback, touch the screen. This screen is displayed, and the camera is ready for your next operation. -- Touch [ ] to display the volume panel, and then touch [ ][ ] to adjust the volume. -- To switch frames, touch the scrollbar or drag left or right. ]. -- To resume playback, touch [ -- Touch [ ] to return to the screen in step 2 of “Viewing” (= 93).
Overexposure Warning (for Image Highlights) Still Images Movies Washed-out highlights in the image flash on the screen in detailed information display (= 95). Still Images View digest movies recorded automatically in [ day of still image shooting as follows. Brightness Histogram Still Images Movies ●● The graph displayed on the top of information displays 2-6 is a histogram that shows the distribution of brightness in the image.
Viewing by Date Browsing and Filtering Images Digest movies can be viewed by date. 1 Basic Guide Choose a movie. ●● Press the [ ] button, choose [List/ Play Digest Movies] on the [ 1] tab, and then choose a date (= 32). 2 Play the movie. ●● Press the [ Before Use ] button to start playback. Navigating through Images in an Index Still Images Advanced Guide 1 2 3 4 5 6 7 8 9 10 Movies By displaying multiple images in an index, you can quickly find the images you are looking for.
Touch-Screen Operations ●● Pinch in to switch from single-image display to index display. ●● To view more thumbnails per screen, pinch in again. ●● Drag up or down on the screen to scroll through displayed images. ●● To view fewer thumbnails per screen, spread your fingers apart. ●● Touch an image to choose it, and touch it again to view it in single-image display.
3 View the filtered images. ●● Images matching your conditions are displayed in yellow frames. To view only these images, press the [ ][ ] buttons or turn the [ ] dial. ●● To leave the filtered image display, press the [ ] button, select [ ] from the menu, and then press the [ ] button. ●● When the camera has found no corresponding images for some conditions, those conditions will not be available. ●● To hide or view other information, press the [ ] button in step 2.
Touch-Screen Operations ●● You can also jump to the previous or next image according to your jump method chosen in step 1 of “Using the Front Dial to Jump between Images” (= 99) by dragging left or right with two fingers. Image Viewing Options Before Use Basic Guide Magnifying Images Advanced Guide Still Images 1 1 2 3 4 5 6 7 8 9 10 Movies Magnify an image. ●● Pressing the [ ] button will zoom in and magnify the image. You can magnify images up to about 10x by continuing to hold the button down.
Touch-Screen Operations Viewing Slideshows ●● Spread your fingers apart (pinch out) to zoom in. ●● You can magnify images up to about 10x by repeating this action. ●● To move the display position, drag across the screen. ●● Pinch in to zoom out. ●● Touch [ display. ] to restore single-image Before Use Still Images Movies Automatically play back images from a memory card as follows. ●● Press the [ ] button, and then choose [Slideshow] on the [ 1] tab (= 32).
Using the Menu Protecting Images Still Images Movies Protect important images to prevent accidental erasure (= 105). ●● Press the [ ] button, select [ ] from the menu, and then use the [ ][ ] buttons or turn the [ ] dial to select [ ]. This will display the [ ] icon. ●● Press the [ ] button again to remove the [ ] icon and unprotect the image. ●● Protected images on a memory card will be erased if you format the card (= 138). Before Use 1 Basic Guide Access the setting screen.
Choosing Images Individually 1 Choose [Select]. ●● Following step 2 in “Using the Menu” (= 102), choose [Select] and press the [ ] button. 2 Choose an image. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button. [ ] is displayed. ●● To cancel selection, press the [ ] button again. [ ] is no longer displayed. ●● Repeat this process to specify other images. 3 Protect the image. Selecting a Range Before Use 1 Choose [Select Range].
3 Choose an ending image. ●● Press the [ ] button to choose [Last image], and then press the [ ] button. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button. ●● Images before the first image cannot be selected as the last image. 4 Protecting All Images at Once 1 Choose [Protect All Images]. ●● Following step 2 in “Using the Menu” (= 102), choose [Protect All Images] and press the [ ] button.
Erasing Multiple Images at Once Erasing Images Still Images Movies You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (= 102) cannot be erased. 1 2 ] Erase the image. ●● Press the [ Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Choosing a Selection Method Choose an image to erase. ●● Press the [ ][ ] buttons or turn the [ dial to choose an image. You can choose multiple images to erase at once.
●● Repeat this process to specify other images. 3 Erase the image. ●● Press the [ ] button. A confirmation message is displayed. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button. ●● If you select an image with both RAW and JPEG files, both will be erased. Selecting a Range Before Use 1 Choose [Select Range]. ●● Following step 2 in “Choosing a Selection Method” (= 105), choose [Select Range] and press the [ ] button.
Using the Menu Rotating Images Still Images Movies Change the orientation of images and save them as follows. 1 Choose [ ]. ●● Press the [ ] button, and then choose [ ] in the menu (= 31). 2 Rotate the image. ●● Press the [ ][ ] buttons or turn the [ ] dial to select [ ] or [ ] and rotate the image 90° in the specified direction. Press the [ ] button to confirm the rotation. ●● Rotation is not possible when [Auto Rotate] is set to [Off] (= 108). Before Use 1 Basic Guide Choose [Rotate].
Deactivating Auto Rotation Follow these steps to deactivate automatic image rotation, which rotates images based on the current camera orientation. ●● Press the [ ] button, choose [Auto Rotate] on the [ 3] tab, and then choose [Off] (= 32). Applying Ratings Before Use Still Images Movies You can organize images by giving them ratings (levels). These levels run between [ ], [ ], [ ], [ ], [ ] and [ ]. By choosing a rating, you can restrict the following operations to all images with the same rating.
3 Finish the setup process. ●● Press the [ ] button. A confirmation message is displayed. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button. ●● Images will not be rated if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3. ●● In step 2, you can also rate images by touching the [ buttons.
3 Review the new image. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Yes], and then press the [ ] button. ●● The saved image is now displayed. ●● Editing is not possible for images shot at a recording pixel setting of [ ] (= 43). ●● RAW images cannot be edited. ●● In step 1, choose [ ] to stop resizing the image. ●● Images cannot be resized to a higher number of recording pixels. Cropping Before Use Still Images You can specify a portion of an image to save as a separate image file.
4 Save as a new image and review. ●● Turn the [ ] dial to choose [ ], and then press the [ ] button. ●● Follow steps 2 – 3 in “Resizing Images” (= 109). ●● ●● ●● ●● Editing is not possible for images shot at [ ] resolution. RAW images cannot be edited. You cannot crop an image that has already been cropped. You cannot apply a Creative filter or resizing to a cropped image. ●● Cropped images will have a lower number of recording pixels than uncropped images.
3 3 Save as a new image and review. ●● Press the [ ] button. ●● Follow steps 2 – 3 in “Resizing Images” (= 109). Basic Guide Advanced Guide ●● Enlarge or reduce images as needed. Follow the steps in “Magnifying Images” (= 100). 4 1 2 3 4 5 6 7 8 9 10 Save as a new image and review. ●● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [New File], and then press the [ ] button. ●● Follow step 2 in “Resizing Images” (= 109).
Editing Movies Still Images Movies You can remove unneeded portions from the beginning and end of movies (excluding digest movies, = 37). 1 Choose [ ]. ●● Following steps 1 – 5 in “Viewing” (= 93), choose [ ] and press the [ button. 4 Save the edited movie. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ●● Press the [ ][ ] buttons to choose [ ], and then press the [ ] button. ●● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [New File], and then press the [ ] button.
Editing Digest Movies Reducing File Sizes Movie file sizes can be reduced by compressing movies as follows. ●● On the screen in step 2 of “Editing Movies”, choose [ ]. Choose [New File], and then press the [ ] button. ●● Choose [Compress & Sav.], and then press the [ ] button. Image quality after compression is as follows. Pre-compression Post-compression Before Use Still Images Movies Individual chapters (clips) (= 37) recorded in [ ] mode can be erased as needed.
7 Available Wi-Fi Features Before Use You can send and receive images and control the camera remotely by connecting it to these devices and services via Wi-Fi.
Importing Images into a Smartphone There are the following two ways to import images from the camera into a smartphone. ●● Connect via NFC (= 116) Simply touch an NFC-compatible Android smartphone (OS version 4.0 or later) against the camera to connect the devices. ●● Connect via the Wi-Fi menu (= 118) Sending Images to an NFC-Compatible Smartphone Use an Android (OS version 4.0 or later) smartphone’s NFC to simplify the process of installing EOS Remote and connecting to the camera.
●● When using NFC, keep the following points in mind. -- Avoid strong impact between the camera and smartphone. This may damage the devices. -- Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions. If connection fails, keep the devices together until the camera screen is updated. -- Do not place other objects between the camera and smartphone.
Adding a Smartphone Using the Wi-Fi Menu Before connecting to the camera, you must install the free dedicated “EOS Remote” app on the smartphone. For details on this application (supported smartphones and included functions), refer to the Canon website. These steps show how to use the camera as an access point, but you can also use an existing access point (= 119). 1 4 Choose [Add a Device]. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a Device], and then press the [ ] button.
8 Adjust the privacy setting. ●● When this screen is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [All images], and then press the [ ] button. ●● After a connection is established with the smartphone, this screen will close in about one minute. 9 Import images. ●● Use the smartphone to import images from the camera to the smartphone. ●● Select [All images] in step 8 when shooting remotely.
Confirming Access Point Compatibility Confirm that the Wi-Fi router or base station conforms to the Wi-Fi standards in “Wi-Fi” (= 194). Connection methods vary depending on whether the access point supports Wi-Fi Protected Setup (WPS, = 120) or not (= 121). For non-WPS access points, check the following information. Using WPS-Compatible Access Points WPS makes it easy to complete settings when connecting devices over Wi-Fi.
6 Establish the connection. ●● On the access point, hold down the WPS connection button for a few seconds. ●● On the camera, press the [ go to the next step. ] button to Connecting to Listed Access Points 1 ●● View the listed networks (access points) as described in steps 1 – 3 of “Using WPS-Compatible Access Points” (= 120). 2 7 Import images.
5 Import images. ●● Follow steps 6 – 9 in “Adding a Smartphone Using the Wi-Fi Menu” (= 118) to select the smartphone to connect to and to configure the privacy settings, and then import the images. ●● To determine the access point password, check on the access point itself or refer to the user manual. ●● Up to 16 access points will be displayed.
3 Registering CANON iMAGE GATEWAY After linking the camera and CANON iMAGE GATEWAY, add CANON iMAGE GATEWAY as a destination Web service on the camera. 1 Log in to CANON iMAGE GATEWAY and access the camera link settings page. ●● From a computer or smartphone, access http://www.canon.com/cig/ to visit CANON iMAGE GATEWAY. ●● Once the login screen is displayed, enter your user name and password to log in.
6 Establish a connection with an access point. ●● Connect to the access point as described in steps 4 – 6 in “Using WPS-Compatible Access Points” (= 120) or in steps 2 – 4 in “Connecting to Listed Access Points” (= 121). ●● Once the camera is connected to CANON iMAGE GATEWAY via the access point, an authentication code is displayed. ●● Keep this display on and available for viewing until step 7 is complete. 7 Enter the authentication code.
3 Choose [ 3 ]. ●● In Playback mode, press the [ to access the Wi-Fi menu. ] button ●● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button. ●● The Web service settings are now updated. ●● If any configured settings change, follow these steps again to update the camera settings. Uploading Images to Web Services 1 Access the Wi-Fi menu. ●● Press the [ on. ●● Press the [ 2 ] button to turn the camera Send an image.
Viewing Images Using a Media Player You can view images in your camera’s memory card on a TV or other device. This function requires a DLNA-compatible TV set, game system, smartphone, or other media player. In this manual, the term “media player” is used to refer to any such device. Follow these instructions only after the media player is connected to an access point. For information about settings and configuration, refer to the documentation provided with the device. 1 Access the Wi-Fi menu.
●● Connections require that a memory card with saved images be in the camera. ●● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the [ ][ ] buttons, and then configure the setting. ●● Media player connections will be displayed as “MediaServ.
4 Connect the printer to the network. ●● In the printer’s Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection. 5 Choose the printer. ●● Choose the printer name (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button. 6 ●● Connections require that a memory card with saved images be in the camera.
Sending Images to Another Camera Connect two cameras via Wi-Fi and send images between them as follows. ●● Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to DIGITAL IXUS WIRELESS cameras with this camera. 1 Access the Wi-Fi menu. ●● Access the Wi-Fi menu as described in step 2 of “Adding a Smartphone Using the Wi-Fi Menu” (= 118).
Image Sending Options You can choose multiple images to send at once and change the image resolution (size) before sending. Some Web services also enable you to annotate the images you send. Sending Multiple Images 1 Choose [Select and send]. ●● On the image transfer screen, press the [ ][ ] buttons to choose [Select and send], and then press the [ ] button. 2 Choose images. ●● Press the [ ][ ][ ][ ] buttons to choose an image to send, and then press the [ ] button to add a [ ] to the image.
Choosing the Number of Recording Pixels (Image Size) On the image transfer screen, choose [ ] by pressing the [ ][ ] buttons, and then press the [ ] button. On the screen displayed, choose the recording pixel setting (image size) by pressing the [ ][ ] buttons, and then press the [ ] button. ●● To send images at original size, select [No] as the resizing option. ●● Choosing [ ] or [ ] will resize images that are larger than the selected size before sending. ●● Movies cannot be resized.
1 Preparing the Computer Install and configure the software on the destination computer. 1 Install the software. ●● Install the software on a computer connected to the Internet (= 158). 2 Register the camera. ●● Windows: In the taskbar, right-click [ and then click [Add new camera]. ●● Mac OS: In the menu bar, click [ then click [Add new camera]. Send images. ●● Follow steps 1 – 2 in “Uploading Images to Web Services” (= 125) to choose [ ].
Shooting Remotely As you check a shooting screen on your smartphone, you can use it to shoot remotely. ●● Privacy settings must be configured in advance to allow all images (= 116, = 135). 1 Secure the camera. ●● Movie shooting is not available. ●● It may take longer than usual to focus on the subject. ●● Depending on the connection status, image display or shot timing may be slower than usual.
4 Editing or Erasing Wi-Fi Settings Choose the item to edit. Before Use ●● Press the [ ][ ] buttons or turn the [ ] dial to choose the item to edit, and then press the [ ] button. Edit or erase Wi-Fi settings as follows. ●● The items you can change depend on the device or service. Editing Connection Information Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Connection 1 Access the Wi-Fi menu and choose a device to edit. ●● Press the [ on. ●● Press the [ ] button to turn the camera ] button.
Erasing Connection Information Erase connection information (information about devices that you have connected to) as follows. ●● Following step 4 in “Editing Connection Information” (= 134), choose [Erase Connection Info] and press the [ ] button. ●● After [Erase?] is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button. ●● The connection information will be erased.
Returning the Wi-Fi Settings to Default Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it. Resetting the Wi-Fi settings will also clear all Web service settings. Be sure that you want to reset all Wi-Fi settings before using this option. 1 Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Choose [Wi-Fi Settings]. ●● Press the [ ] button and choose [Wi-Fi Settings] on the [ 4] tab (= 32). 2 Choose [Reset Settings].
8 Set-Up Menu Customize or adjust basic camera functions for greater convenience Adjusting Basic Camera Functions MENU (= 32) functions on the [ 1], [ 2], [ 3] and [ 4] tabs can be configured. Customize commonly used functions as desired, for greater convenience. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Date-Based Image Storage Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day.
●● Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted (= 138)) memory card. Formatting Memory Cards Before using a new memory card or a card formatted in another device, you should format the card with this camera. Formatting erases all data on a memory card.
Resetting the Electronic Level Changing Video Formats This lets you define the image format for your TV set. This setting also changes the image quality (frame rate) options available for movies. Before Use Restore the electronic level to its original state as follows. Note that this is not possible unless you have calibrated the electronic level. ●● Choose [Electronic Level] on the [ 1] tab and then press the [ ] button. ●● Choose [Video system] on the [ 1] tab and then choose an option.
Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (= 28). ●● Choose [Power Saving] on the [ 2] tab and then press the [ ] button. ●● Select an item and press the [ ] button. Press the [ ][ ] buttons or turn the [ ] dial to change the setting and then press [ ] again. ●● To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].
World Clock Date and Time To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/Time setting manually. Before using the world clock, be sure to set the date and time and your home time zone, as described in “Setting the Date and Time” (= 18).
Silencing Camera Operations The camera can be silenced when you press the shutter button halfway or trigger the self-timer. ●● Choose [Beep] on the [ 3] tab and then choose [Off]. Hiding Hints and Tips Hints and tips are normally shown when you choose an option in the quick setting menu (= 31) or shooting functions screen (= 61). If you prefer, you can deactivate this information. ●● Choose [Hints & Tips] on the [ 3] tab and then choose [Off].
2 Configure the settings. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Disable], and then press the [ ] button. Activating the Cleaner 1 Access the setting screen. ●● After turning the camera on in shooting mode, choose [Sensor cleaning] on the [ 3] tab and press the [ ] button. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Clean now ], and then press the [ ] button. 2 Clean the sensor.
Checking Certification Logos Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body. ●● Choose [Certification Logo Display] on the [ 4] tab and then press the [ button. ] ●● To check the information entered, choose [Display Copyright Info] on the screen above, and then press the [ ] button.
Adjusting Other Settings The following functions are also available for use. ●● [Wi-Fi Settings] ([ 4] tab) (= 115) ●● [Custom shooting mode (C)] ([ 4] tab) (= 90) ●● [ firmware ver.: *.*.*] ([ 4] tab) (used for updating the firmware) ●● During firmware updates, the touch screen will be disabled to prevent accidental operations. ●● The following functions are not restored to default settings.
9 Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
System Map Before Use Basic Guide Advanced Guide 600EX-RT 430EX II 320EX 600EX 270EX II 90EX ST-E3-RT ST-E2*1 Macro Twin Lite MT-24EX Macro Ring Lite MR-14EX II MR-14EX Electronic Viewfinder EVF-DC1 1 2 3 4 5 6 7 8 9 10 Remote Controller RC-6 EF-M lenses EF lenses EF-S lenses Accessories Mount Adapter EF-EOS M External microphone HDMI Cable HTC-100 Neck Strap EM-200DB IFC-400PCU*2 TV set/Video PictBridge-compatible printer Neck Strap EM-E2 Camera Basics Auto Mode / Hybrid Auto Mode Other S
Optional Accessories The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Lens EF-M lenses, EF lenses, EF-S lenses ●● Pick from a variety of lenses to support whatever target or expression you want. The Mount Adapter EF-EOS M is required to attach EF and EF-S lenses. Mount Adapter EF-EOS M ●● Use this mounting adapter to attach EF or EF-S lenses to your camera.
Flash Off-Camera Shoe Cord OC-E3 ●● Connection cord for using Speedlite away from camera. Speedlite 600EX-RT/600EX/430EX II/ 320EX/270EX II/90EX ●● Shoe-mounted flash unit that enables many styles of flash photography. Speedlite 580EX II, 580EX, 550EX, 430EX, 420EX, 380EX, 270EX, and 220EX are also supported. Speedlite Transmitter ST-E3-RT/ST-E2 ●● Enables wireless control of slave Speedlite flash units (except Speedlite 220EX/270EX).
Interface Cable IFC-400PCU ●● For connecting the camera to a computer or printer. ●● IFC-200U and IFC-500U are also compatible. HDMI Cable HTC-100 ●● For connecting the camera to an HDMI input of a high-definition TV. Printers Canon-Brand PictBridge-Compatible Printers ●● Even without using a computer, you can print images by connecting the camera directly to a printer. For details, visit your nearest Canon retailer.
3 Turn the TV on and switch to external input. ●● Switch the TV input to the external input you connected the cable to in step 2. 4 Turn the camera on. ●● Press the [ on. ] button to turn the camera ●● Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.) ●● When finished, turn off the camera and TV before disconnecting the cable. ●● Touch-screen operations are not supported while the camera is connected to a television.
●● Do not disconnect the adapter or unplug the power cord while the camera is still on. This may erase your shots or damage the camera. ●● Do not attach the adapter or adapter cord to other objects. Doing so could result in malfunction or damage to the product. Remote Control Shooting Use Remote Controller RC-6 (sold separately) to shoot pictures up to approx. 5 meters (16 ft.) from the front of the camera. ●● Follow step 1 in “Using the Self-Timer” (= 40) and choose [ ].
Using Electronic Viewfinders (Sold Separately) Still Images Movies Use an electronic viewfinder (sold separately) to keep closer track of your subject and make it easier to shoot. When using an electronic viewfinder, shooting time and number of pictures are reduced compared to using the camera’s rear screen (LCD monitor). 1 2 Make sure the camera is off. Attach the electronic viewfinder to the hot shoe. ●● Remove the cover of the electronic viewfinder.
●● Although the electronic viewfinder is produced under extremely high-precision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This is not a malfunction. They do not affect the images recorded. ●● Vertical or horizontal black bars may be displayed depending on the selected aspect ratio (= 45). The black bars indicate image areas not recorded.
3 Choose shooting mode [ ], [ [ ], or [ ]. ], ●● Flash settings can only be configured in these modes. In other modes, the flash is adjusted and fired automatically as needed. 4 Configure the external flash. (= 155) ●● Keep cords (from the macro ring lite or macro twin lite, as well as the off-camera shoe cord) away from flash heads. ●● When using a tripod, adjust the position of the legs to prevent the flash heads from coming into contact with the legs.
Option Flash zoom (Flash coverage) Description With Speedlites that have a zooming flash head, you can set the flash coverage. Normally, set this to [AUTO] so that the camera will automatically set the flash coverage to match the lens focal length. Change the timing of the flash and shutter release as follows. ] will fire the flash immediately after the ●● [ shutter opens. Shutter synchronization Flash Exp.
Resetting External Flash Functions You can reset the options in the [External flash func. setting] and [External flash C.Fn setting] screens to their defaults. ●● Press the [ ] button, select [Clear settings] (within [Flash Control] on the [ 3] tab), and press the [ ] button. ●● Settings will apply to external microphones as well when the attenuator is enabled (= 59). ●● When using an external microphone, [Wind Filter] (= 59) is always set to [Off].
Using the Software The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer. Software Checking Your Computer Environment The software can be used on the following computers. For detailed system requirements and compatibility information, including support in new operating systems, visit the Canon website.
3 Saving Images to a Computer Use an interface cable (= 2) to connect your camera and save images to a personal computer. Windows 7 and Mac OS X 10.8 are used here for the sake of illustration. 1 Connect the camera to the computer. ●● With the camera turned off, open the cover (1). With the smaller plug of the cable in the orientation shown, insert the plug fully into the camera terminal (2). ●● Insert the larger plug of the cable into the computer’s USB port.
●● The first time you connect the camera to the computer, drivers will be installed, so it may take a few minutes until camera images are accessible. ●● Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply. -- It may take a few minutes after you connect the camera to the computer until camera images are accessible. -- Images shot in vertical orientation may be saved in horizontal orientation.
3 4 Turn the printer on. Turn the camera on. ●● Press the [ on. 5 Configuring Print Settings 1 Movies Access the printing screen. Basic Guide Advanced Guide ●● Follow steps 1 – 6 in “Easy Print” (= 160) to access this screen. Choose an image. 1 2 3 4 5 6 7 8 9 10 ] 2 Access the printing screen. ●● Press the [ ] button, choose [ press the [ ] button again. 7 Still Images ] button to turn the camera ●● Press the [ ][ ] buttons or turn the [ dial to choose an image.
Cropping Images before Printing Choosing Paper Size and Layout before Printing Still Images Movies By cropping images before printing, you can print a desired image area instead of the entire image. 1 1 Choose [Cropping]. ●● After following step 1 in “Configuring Print Settings” (= 161) to access the printing screen, choose [Cropping] and press the [ ] button. ●● A cropping frame is now displayed, indicating the image area to print. 2 ] or [ ●● To move the frame, press the [ ][ ][ ][ ] buttons.
4 Available Layout Options Default Bordered Borderless N-up ID Photo Fixed Size Matches current printer settings. Prints with blank space around the image. Borderless, edge-to-edge printing. Choose how many images to print per sheet. Prints images for identification purposes. Only available for images with a recording pixel setting of L and an aspect ratio of 3:2. Choose the print size. Choose from 3.5 x 5 in., postcard, or wide-format prints.
●● To cancel printing in progress, press the [ ] button, choose [OK], and then press the [ ] button again. ●● [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridge-compatible printers from CP720/CP730 and earlier models. Standard Index Print Type Both On Off On Off Date Adding Images to the Print List (DPOF) Still Images File No. Movies Batch printing (= 166) and ordering prints from a photo development service can be set up on the camera.
Setting Up Printing for Individual Images Still Images 1 Setting Up Printing for a Range of Images Movies Choose [Select Images & Qty.]. ●● Press the [ ] button, choose [Print settings] on the [ 2] tab, and then press the [ ] button. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [Select Images & Qty.], and then press the [ ] button (= 32). 2 Choose an image. ●● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
Adding Images Individually Adding Images to a Photobook Still Images Movies Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer. Choosing a Selection Method ●● Press the [ ] button, choose [Photobook Set-up] on the [ 2] tab, and then choose how you will select images.
Removing All Images from a Photobook Still Images Before Use Movies ●● Following the procedure in “Choosing a Selection Method” (= 166), choose [Clear All Selections] and press the [ ] button. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 ●● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
10 Appendix Helpful information when using the camera Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Power Nothing happens when the ON/OFF button is pressed. ●● ●● ●● ●● Confirm that the battery pack is charged (= 16). Confirm that the battery pack is inserted facing the correct way (= 17).
Shooting Cannot shoot. ●● Pictures cannot be taken unless the focus is right. Press the shutter button halfway to focus on subjects. Once the frame is colored green, you can take the picture. ●● In Playback mode (= 93), press the shutter button halfway (= 28). Strange display on the screen under low light (= 30). Strange display on the screen when shooting. ●● Note that the following display problems are not recorded in still images, but are recorded in movies.
There is linear noise or a moiré pattern in the image ●● Depending on the subject, linear noise or a moiré pattern may appear in the image. This can occur especially in - the following conditions. -- Subjects with fine horizontal stripes or checkered patterns, etc. -- When there are strong light sources such as sunlight or illumination in or close to the shooting screen. In these situations, noise and moiré patterns can be reduced by taking the following actions.
Computer Cannot transfer images to a computer. ●● When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows. ] button to enter Playback mode. Hold the [ ] button -- Press the [ down as you press the [ ] and [ ] buttons at the same time. On the next screen, press the [ ][ ] buttons to choose [B], and then press the [ ] button.
On-screen Messages If an error message is displayed, respond as follows. Capture or Playback No memory card ●● The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (= 17). Memory card locked ●● The write-protect tab of the memory card is set to the locked position. Switch the write-protect tab to the unlocked position (= 17). Cannot record! ●● Shooting was attempted without a memory card in the camera.
Print error ●● Check the paper size setting (= 162). If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again. Ink absorber full ●● Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement. Wi-Fi Connection failed ●● No access points were recognized. Check the access point settings (= 120). ●● A device could not be found. Turn the camera off and on again, and retry the connection.
On-screen Information During Shooting (13) Battery level (= 174) (28) AE lock (= 61) (14) Still image quality (compression, resolution) (= 43) (29) Shutter speed (= 82) (30) Aperture value (= 83) (15) Recordable shots (31) Exposure compensation (= 61) (16) Maximum burst (32) Highlight tone priority (= 64) (17) Movie quality (resolution, frame rate) (= 45) (33) ISO speed (= 62) (18) Remaining time (19) Histogram (= 96) (20) Quick setting menu (= 31) (21) Manual focus (= 74) (22) Grid lines (= 30)
Info Display 2 Playback Before Use Basic Guide Info Display 1 Advanced Guide Image shown/number of target images (8) Protect (9) Folder number - File number (2) Battery level (10) Shutter speed (3) Wi-Fi status (4) Settings can be applied to [ mode (5) Sent to Image Sync (6) Edited*1 (7) Rating (1) (11) Aperture value ] (12) Exposure compensation level (13) ISO speed (14) Highlight tone priority (15) Image quality*2 *1 Displayed on images that have Creative Filter, resize, cropping
Info Display 5 Displays noise-reduction settings for long exposure and high-speed shooting. The display on the top of the screen is the same as Info Display 2. Info Display 6 ●● During movie playback, you can skip back or forward (or to the previous or next clip) by pressing the [ ][ ] buttons. ●● To switch frames, touch the scrollbar or drag left or right. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 10 Displays lens correction data, peripheral illumination, and chromatic aberration data.
Functions and Menu Tables Before Use Basic Guide Functions Available in Each Shooting Mode Advanced Guide Function O O O O O – – *1 O O O O O O O O O O O O O O O – AUTO *2 O O O O O O O O O O O O O O O O O O O O O O O 100 – 6400 *2 O O O O – – – – – – – – – – – – – – – – – – O 8000, 10000, 12800 *2 O O O O – – – – – – – – – – – – – – – – – – – Auto *2 – – – O O O O O – O – O – – O O O O
Function Before Use Shooting Mode Basic Guide AE Lock (= 58, = 61), FE Lock (= 76) *2 O O O O – – – – – – – – – – – – – – – – – *5 *5 AE Lock when shooting movies, Exposure Compensation (= 58) *2 O O O O – – – O O O O O O O O O O O O O O O *5 Manual Focus (= 74)*6 *2 O O O O – – O O O O – O O O O O O O O O O O O Manual Focus Switching when Shooting Movies (= 57) *2 O O O O – – O O O O – O O O O O O O O O O
Quick Settings Before Use Basic Guide Shooting Mode Function AF method (= 69) AF operation (= 72) Image quality (= 43) When set to [NTSC] / When set to [PAL] / Drive Mode (= 42) Self-timer/Remote ctrl (= 40) White balance (= 65) WB Correction (= 66) *1 O O O O O O *2 O O O O O O O – O O – O O O O O *1 O O O O – – *2 O O O O O O O O O O O O O O O O *1 O O O O O O *2 O O O – O O O O O O O O O O O O *1 O O O O – – *2 –
Function Basic Guide / / / Picture Style (= 67) Auto Lighting Optimizer (= 64) Metering mode (= 62) Still Image Aspect Ratio (= 45) *1 *2 *3 *4 *5 *6 Before Use Shooting Mode / / / / / / / *1 O O O O O O – O O O O – O – – – – – – – – O O *1 O O O O – – O – – – – O – O O O O O O O O O O *1 O O O O – – – – – – – – – – – – – – – – – O O *1 O O O O – – *4 – – – – – – – – – – – – – – O O *1 O O O O –
Shooting Tabs Before Use Basic Guide Shooting Mode Function Image quality (= 43) – JPEG / / RAW / / / / – Still Image Aspect Ratio (= 45) 1 Shooting information display (= 87) Advanced Guide *1 O O O O O – – O – – O – – – – – – – – – – O O *1 O O O O O O O O O O O O O O O O O O O O O O O *1 O O O O O – O O O O O O O O O O O O O O O O O *1 O O O O O O O O O O O O O O O O O O O O O O O *1 O O O O
Function Basic Guide AF operation (= 72) See “Quick Settings” (= 179). AF method (= 69) See “Quick Settings” (= 179).
Function Basic Guide *1 AEB (= 63) ISO speed (= 62) ISO Speed O O O O – – – – – – – – – – – – – – – – – – – ISO Auto *1 O O O O – – – – – – – – – – – – – – – – – – O *1 O O O O – – – – – – – – – – – – – – – – – O O Auto Lighting Optimizer (= 64) See “Quick Settings” (= 179). Metering mode (= 62) See “Quick Settings” (= 179).
Function Basic Guide Custom White Balance (= 65) *1 O O O O – WB Correction (= 66) See “Quick Settings” (= 179). Picture Style (= 67) See “Quick Settings” (= 179). High ISO speed NR (= 80) 4*7 Before Use Shooting Mode Long exp.
Function Basic Guide Movie rec.
C.Fn Tab Before Use Basic Guide Shooting Mode Function C.Fn I: Exposure (= 88) C.Fn II: Autofocus (= 88) ISO expansion Safety shift AF-assist beam (LED) firing Custom Controls C.
INFO. Quick Control Set Up Tab The Adjusting Shooting Functions from a Single Screen (= 61) is not displayed in [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], and [ ] modes.
My Menu Tab Tabs 1 Playback Mode Quick Settings Item Ref. Page Item Ref. Page My Menu settings = 91 Protect = 102 Rotate = 107 Rating = 108 Image Search = 98 Playback Tab Tabs 1 2 3 4 Before Use Item Ref.
Handling Precautions ●● The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. ●● Never leave the camera near anything that has a strong magnetic field such as a magnet or electric motor. Strong magnetic fields can cause camera malfunction or image data loss. ●● Besides dust entering the camera from outside, in rare cases lubricant from the camera’s internal parts may adhere to the front of the sensor.
Specifications Recording format Type Type Recording media Image sensor size Compatible lenses Lens mount Recording System Image type Digital single-lens non-reflex AF/AE camera SD memory card, SDHC memory card, SDXC memory card * Compatible with UHS-I Approx. 22.3 × 14.9 mm Canon EF-M, EF*, and EF-S* lenses * Mount Adapter EF-EOS M required. (35mm film equivalent focal length is approx. 1.6 times the lens focal length) Canon EF-M mount Resolution Before Use Design rule for Camera File System (DCF) 2.
Image Processing during Shooting Picture Style White balance Noise reduction Automatic image brightness correction Highlight tone priority Lens aberration correction Auto, Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Def.
Shutter Type Shutter speed Still Photo Shooting Electronically controlled, focal-plane shutter 1/4000 sec. to 30 sec. (Total shutter speed range; available range varies by shooting mode), Bulb, X-sync at 1/200 sec. Flash Built-in Flash External flash Flash metering mode Flash exposure compensation FE lock PC terminal Retracting, manual pop-up flash Guide number approx. 5 (ISO 100/m) Supports angle of view equivalent to focal length of approx. 18 mm (35mm film equivalent: approx.
Servo AF Brightness metering range Exposure control Exposure compensation Provided Playback EV 1 - 20 (at room temperature, ISO 100) Program AE for movies and manual exposure Image display formats ±3 stops in 1/3-stop increments ISO speed (Recommended exposure index) With automatic exposure: ISO 100 - 3200 (Full HD) / ISO 100 - 6400 (HD/SD) set automatically With manual exposure: ISO 100 - 3200 (Full HD) / ISO 100 - 6400 (HD/SD) set automatically/ manually, H (ISO 6400 (Full HD) / ISO 12800 (HD/SD) e
Direct Printing Type Printable images Print ordering Wi-Fi PictBridge (USB and Wireless LAN) JPEG and RAW images (Can print RAW images displayed as JPEG only with images taken with the same model) DPOF Version 1.
Power Supplies Battery Battery Pack LP-E17 (Quantity 1) *AC power can be supplied via AC Adapter Kit ACK-E17 Number of Shots per Memory Card Before Use Using a 16 GB memory card Basic Guide File Size (Approx. MB) Recordable Shots (Approx.) Maximum Burst (Approx.) 9.0 1680 1000 5.8 2612 1000 5.8 2612 1000 3.6 4152 1000 3.0 5061 1000 Dimensions and Weight 2.0 7592 1000 1.8 8377 1000 Dimensions (W x H x D) Approx. 110.9 x 68.0 x 44.4 mm (4.4 x 2.7 x 1.7 in.) 0.
Recording Time per Memory Card Internal Flash Range Guide Before Use Using a 16 GB memory card Image Quality File Size (Approx. MB) (approx. - m) Total Recording Time (Approx.) 172.6 MB/minute 1 hour 26 minutes 5 seconds 115.4 MB/minute 2 hours 8 minutes 27 seconds 22.4 MB/minute 10 hours 22 minutes 35 seconds ●● Continuous shooting is possible until either the memory card reaches its limit or the recording time reaches 29 minutes 59 seconds.
Battery Charger LC-E17/LC-E17E Compatible battery Recharging time Rated input Rated output Working temperature range Working humidity Dimensions (W x H x D) Before Use Battery Pack LP-E17 Basic Guide Approx. 2 hours (at room temperature) Advanced Guide 1 2 3 4 5 6 7 8 9 10 100 - 240 V AC (50/60 Hz) 8.4 V DC / 700mA 5°C - 40°C 85% or less Approx. 67.3 x 27.7 x 92.2 mm (2.65 x 1.09 x 3.63 in.) LC-E17: Approx. 85 g (3.00 oz.) Weight LC-E17E: Approx. 80 g (2.82 oz.
E Index Numbers 1-point (AF frame mode) 69 A AC adapter kit 148, 151 Accessories 148 AEB shooting 63 AE Lock 61 AF frames 69 AF lock 71 AF-point zoom 74 Art bold effect (shooting mode) 54 Aspect ratio 45 Auto Lighting Optimizer 64 Auto mode (shooting mode) 23, 35 Auto rotate 108 Av (shooting mode) 83 B Batteries → Date/time (date/time battery) Power saving 28 Battery charger 2, 148 Battery pack Charging 16 Eco Mode 139 Level 174 Power saving 28 Black and white images 57 BULB (Bulb exposure) 85 B/W (Mo
J Jump display 99 L Landscape 67 Landscape (shooting mode) 51 Lens 20 Lock release 21 Level 174 Long exposure noise reduction 81 M M (shooting mode) 84 Macro photography 51 Magnified display 100 Main Dial 3 Manual focus 74 Memory cards 2 Menu Basic operations 32 Table 177 Metering method 62 MF (manual focusing) 74 MF peaking 74 microSD/microSDHC/microSDXC memory cards → Memory cards Miniature effect (shooting mode) 55 Movies Editing 113 Image quality (resolution/frame rate) 43 Multi Shot Noise Reductio
Wi-Fi (Wireless LAN) Precautions • The model number is PC2064 (including WLAN module model WM223). • Countries and Regions Permitting WLAN Use - Use of WLAN is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating WLAN regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from WLAN use in other countries and regions.
• Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information. Additionally, you could fall victim to other types of unauthorized access such as impersonation (where someone assumes an identity to gain access to unauthorized information) or springboard attacks (where someone gains unauthorized access to your network as a springboard to cover their tracks when infiltrating other systems).
