User Manual

128
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
● Connections require that a memory card with saved images be in
the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by pressing the [
][ ] buttons to
choose the device and then pressing the [
] button. To add a
new device, display the device selection screen by pressing the
[
][ ] buttons, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
32) > [ 4] tab > [Wi-Fi Settings] > [Target History] > [Off].
● To use another access point, follow the steps in “Using Another
Access Point” (
=
119).
4
Connect the printer to the network.
● In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
5
Choose the printer.
● Choose the printer name (either press the
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button.
6
Choose an image to print.
● Press the [ ][ ] buttons or turn the [ ]
dial to choose an image.
● Press the [
] button, choose [ ], and
press the [ ] button again.
● Press the [
][ ] buttons or turn the [ ]
dial to choose [Print], and then press the
[ ] button.
● For detailed printing instructions, see
“Printing Images” (
=
160).
● To end the connection, press the [
]
button, choose [OK] on the conrmation
screen (either press the [ ][ ] buttons or
turn the [ ] dial), and then press the [ ]
button.