User Manual

135
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
2
Select a share setting.
● Press the [ ][ ] buttons or turn the [ ]
dial to choose a menu item.
● If selecting [All images] or [Images shot
today], press the [
] button.
● If selecting [Images shot in past days],
press the [
] button. In the screen that
appears, press the [ ][ ] buttons to
select the number of days, and then
press the [ ] button.
● If selecting [Select by rating], press the
[
] button. In the screen that appears,
press the [ ][ ] buttons to select the
rating, and then press the [ ] button.
● If selecting [File number range], press the
[
] button. In the screen that appears,
select the beginning and end of the le
number range, choose [OK], and then
press the [ ] button. Follow steps 2 – 3
in “Selecting a Range” (
=
103) to dene
the range.
● Choose [All images] when shooting remotely.
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
● Following step 4 in “Editing Connection
Information” (
=
134), choose [Erase
Connection Info] and press the [ ]
button.
● After [Erase?] is displayed, press the
[
][ ] buttons or turn the [ ] dial to
choose [OK], and then press the [ ]
button.
● The connection information will be
erased.
Specifying Images to Share with Smartphones
You can change the device nickname (display name) that is displayed on
the camera.
Share setting Images shared with smartphone
All images All images stored on the card
Images shot today Images shot on the current day
Images shot in past
days
Images shot within a specied previous
number of days
Select by rating
Images with the specied rating (=
108)
File number range Images within the specied range
This setting is also possible whenever the screen in step 2 is displayed
during the smartphone connection.
1
Access the setting screen.
● Follow step 4 in “Editing Connection
Information” (
=
134), choose [View
Settings] and then press the [ ] button.