User Manual

18
Basic Guide
Before Use
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Remove the memory card.
● Push the memory card in until it clicks,
and then slowly release it.
● The memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
1
Turn the camera on.
● Press the ON/OFF button.
● The [Date/Time] screen is displayed.
2
Set the date and time.
● Press the [ ][ ] buttons to choose an
option.
● Press the [
][ ] buttons or turn the [ ]
dial to specify the date.
● When nished, press the [
] button.
3
Specify your home time zone.
● Press the [ ][ ] buttons to choose your
home time zone.
3
Check the card’s write-protect tab
and insert the memory card.
● Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position (1).
● Insert the memory card with the label (2)
facing as shown until it clicks into place.
● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
● Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
● Look at the screen display for the number of shots and movie
length that can be shot with the current card (
=
23).
Removing the Battery Pack and Memory Card
Remove the battery pack.
● Open the cover and press the battery
lock in the direction of the arrow.
● The battery pack will pop up.