User Manual

Table Of Contents
22
Basic Guide
Before Use
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Using a Tripod
Use the tripod foot included with the adapter to attach the camera to a
tripod. Do not use the camera’s tripod socket.
Attach the tripod foot to the adapter. Use
the turning dial to secure it rmly in place.
Attach the tripod to the socket of the
tripod foot.
If using an EF lens with a tripod foot (such as super telephoto
lenses), attach the tripod foot socket directly to the tripod.
Stabilizing the Image
If using a lens with an image stabilization function, you can compensate
for small camera movements (shaking) that occur while shooting. Lenses
with built-in image stabilization have “IS” in their names.
Move the lens’s image stabilizer switch to
the [ON] position.
If using a lens that is heavier than the camera, make sure support
is provided for the lens while carrying and shooting.
Using adapters may extend the minimum shooting distance of the
lens or change its maximum magnication ratio or shooting range.
If the front part (focusing ring) of the lens rotates during
autofocusing, do not touch the rotating part.
The focus preset function on some super telephoto lenses is
unavailable. Also, the power zoom function of lens EF35–80mm
f/4–5.6 PZ is unavailable.
Detaching a Lens
1
Detach the adapter.
Make sure the camera is off.
While pressing the lens release button,
turn the adapter (with lens attached) as
shown by the arrow.
Turn the adapter until it stops and then
detach it.
2
Detach the lens.
While pushing down on the detach
lever on the adapter, turn the lens
counterclockwise.
Turn the lens until it stops and then
detach it.
Attach the lens cap to the detached lens.