User Manual

36
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Recording Movies
1) Start recording.
● Press the movie button. Recording
begins, and [ Rec] is displayed with the
elapsed time.
● Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
● Frames displayed around any detected
faces indicate that they are in focus.
● Once recording begins, take your nger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
● To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded.
● When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
3) Finish recording.
● To stop movie recording, press the movie
button again.
● Recording will stop automatically when
the memory card becomes full.
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
● If [!] ashes on-screen, move the [
]
switch to raise the ash. It will re when
shooting. If you prefer not to use the
ash, push it down with your nger, into
the camera.
2) Shoot.
● Press the shutter button all the way down
to shoot. In low-light conditions, the ash
res automatically when you have it
raised.
● The captured image will be displayed for
approximately 2 seconds on the screen.
● Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.