User Manual

47
Advanced Guide
Basic Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
4
P Mode
5
Tv, Av, M, and C Modes
Before Use
Changing the Image Display Period after Shots
Still Images Movies
● Press the [ ] button, choose
[Image review] on the [ 1] tab, and then
choose the desired option.
● To restore the original setting, repeat this
process but choose [2 sec.].
2 sec.,
4 sec.,
8 sec.
Displays images for the specied time. Even while the shot is
displayed, you can take another shot by pressing the shutter
button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information.
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(
=
32).
Preventing the Red-Eye Reduction Lamp from
Lighting Up
Still Images Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the ash is used in low-light shots.
1
Access the [Flash Control] screen.
● Press the [ ] button, choose [Flash
Control] on the [ 3] tab, and then press
the [ ] button (
=
32).
2
Congure the setting.
● Choose [Red-eye reduc.], and then
choose [Off] (
=
32).
● To restore the original setting, repeat this
process but choose [On].