User Manual

192
When the power is turned on
“Card locked!” message appears.
The SD memory card’s or
SDHC memory card’s
write protect tab is set to
“Write protect”.
z When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward (p. 212).
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is
low.
z Recharge the built-in battery
immediately (p. 15).
LCD monitor
Nothing displays.
The LCD monitor is set
not to display.
z Press the DISP. button to turn on the
LCD monitor (p. 60).
[Power Saving] is set to
[Display Off].
z Press any button other than the
ON/OFF button or change the camera
orientation to turn the LCD monitor
back on (p. 174).
The LCD monitor will shut off during shooting.
If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in mode.
Camera screen is black at start-up.
Incompatible image has
been selected as the
startup image in the My
Camera settings.
z Change the start-up image in the My
Camera settings (p. 188) or use the
supplied software program
ZoomBrowser EX or ImageBrowser to
restore the default settings.