User Manual

E17
5 OPERATION
5-5. SWITCH OPERATIONS
Functions can be assigned to the five switches: the VTR, RET, AUX switches of the drive unit, or AUX1
and AUX2 switches of the zoom demand on the information display. VTR, RET, Shtl, and Fr1P functions
are assigned respectively by default.
The following steps explain how to assign the functions to the switches in basic mode. For further de-
tails, refer to the Informa
tion Display Operation Manual.
1 Press the DISPLAY switch to turn on the display.
2 After using the control key to select the name of the switch key to which
the function is to be allocated, press the Set key. The name of the
switch and the default or last setting now blink on the display.
3 Press the left or right key until the function to be changed appears on
the display.
4 Press the Set key. This completes the setting.
Switch
Default
value
Functions
Fr1P FRM2 Sped Shtl Sped Shtl NON RET VTR
1
V VTR
● ● ● ● ● ● ● ●
2
R RET
● ● ● ● ● ● ● ●
3
A Fr1P
● ● ● ● ● ● ● ● ●
4
A1 Shtl
● ● ● ● ● ● ● ● ●
5
A2 Fr1P
● ● ● ● ● ● ● ● ●
4
and
5
are AUX1 and AUX2 switches on the zoom demand.
Switch name Description
VTR
Starts/stops VTR operation.
RET
Hold down to view the main-line video on the view finder.
Fr1P, Fr2P
Press to move to the stored zoom/focus position.
One position can be stored/called per each switch for Fr1P, Fr1F and Fr2P, Fr2F.
Fr1F, Fr2F
Sped
Press to move in the stored zoom direction (toward telephoto or widest end) at the stored
zoom speed.
Shtl
Press to move to the stored zoom position at the maximum speed. Release to return to the
previous zoom position at the maximum speed.
NON
No function
[Trk] OFF
Shtl
Fr1P
A 1
A2
MENU
IG:50
Fr1P
A
[ I-Tq ]
H
[ Adj ]
② RET switch
① VTR switch
③ AUX switch
A
V
R