User Manual

E19
CAUTION
• Take care not to damage the drive unit cover when removing the drive unit fixing screws.
• Use a Phillips screwdriver with a shaft diameter of 4mm or less to remove the drive unit fixing screws.
• Never insert the removed screws into the screw holes in which the drive unit was fixed.
• When the lens is tilted, the zoom ring may turn and the zoom position may change. To retain the zoom position when
the lens is tilted, mount a cinema operation accessory with adjustable torque and with a pitch of 0.5.
• If the drive unit is removed, the iris ring may turn and the iris position may change. To retain the iris position, mount a
cinema operation accessory with adjustable torque and with a pitch of 0.4 on the iris ring. For details on the opera-
tion accessory with a pitch of 0.4, contact Canon Inc. or Canon distributers & sales representatives.
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 Cap the contact on the lens body.
If power is supplied from the camera when the PL
mount lens is used, remove the 12-pin cable and
then cap the connector.
7 Place the detached drive unit in the supplied stor-
age bag.
Cap