User Manual

Maximum resolution 2400 dpi horizontally (*1) × 1200 dpi vertically
Printhead PF-04
Number of nozzles MBK: 5120; Others: 2560 each color
*1:Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Memory
Memory 256 MB
Interface
USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IEEE 802.3az EEE
Protocols SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)
Ink
For information on the ink the printer supports, see "Ink Tanks." ➔ P.496
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.") ➔P.313
Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔P.310
Minimum paper length Rolls 203.2 mm (8.0 in)
Sheets 279.4 mm (11.0 in)
Maximum printable length (*1) Rolls 18 m (19.7 yd)
Sheets 1,600 mm (63.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets 0.07–0.8 mm (0.0028–0.031 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." ➔ P.575
*1:Varies depending on the operating system or application.
Optional
Roll Holder Set Roll Holder Set RH2-33
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.
iPF770
Print Area
User's Guide
Specifications Printer Specifications
575