User guide

Adjustment Procedures
PROCEDURE 1 : Copy the "IXYA1020.FIR" File to the CF Card
Two methods are provided for copying the "IXYA1020.FIR" file to the CF card.
IF YOU HAVE A CF CARD READER, PC CARD READER* OR NOTEBOOK TYPE PC* WITH A PC
CARD SLOT
(A)
1. Insert the formatted CF card into the card reader.
2. Copy the "IXYA1020.FIR" file from the downloaded data to the CF card.
Note : Please confirm that both the copied file on the CF card and the original one on your PC have the same
file size before proceeding with the camera adjustment.
Windows® : Right-click the file icon and select [Property]
Mac OS : Click the file icon while pressing the control key and select
[Information]
* If you use a PC card reader or a notebook type PC with a PC card slot, a CF-to-PC card
adapter is required.
IF YOU DO NOT HAVE ANY OF THE ABOVE CARD READING DEVICES(B)
1. Insert the CF card into the camera, and connect it to the PC with an USB cable.
2. Double-click the " " in the "A1020_Adjustment" folder, and follow the instructions so that
the "IXYA1020.FIR" file can be copied onto the CF card in the camera *.
UploadFirmware
* The Main Dial of the camera should be set to (Replay) mode while the PC is
connected.
When you attempt to transfer the data to the CF card in the camera with the
"UploadFirmware", do not open the CF card slot cover, turn the Main Dial or turn the
power off until the data transfer is completed.
Any of the above operations during data transfer will disable the camera adjustment.