User guide

PROCEDURE 4 : Press the "SET" Button to Start
Press "SET" button to start executing the camera adjustment.
Precautions :
If you wait more than 5 minutes between Procedures 3 and 4, the camera will cancel the
menu and turn off using its Auto Power Off function when you press the MENU button. In
this case the camera is not adjusted. To adjust the camera
please return to .PROCEDURE 2
Do not turn the power off while installing the camera adjustment program.
Do not open the CF card slot cover, press any camera buttons or jar the camera body during the adjustment
program installation.
The adjustment will complete in a few seconds.
The message shown on the right will be displayed on the LCD monitor
when the adjustment is complete.
Pressing "SET" button the camera turns off.
That's all the camera adjustment.
You can select [Adjust Camera] from Play menu after adjustment. Once
you have successfully adjusted the camera, you cannot adjust it again.
The message shown on the right will be displayed on the LCD monitor.
If you wish to use the CF card for taking pictures, initialize the card using the procedure outlined in .STEP 2