Instruction Manual

3. Setting the Shooting Mode (Continuous or

Singie Frame Shooting)

* When using the Canon A-1 or AE-1 PROGRAM with the

power winder, the changeover of continuous or single

frame shooting is performed by the main switch. Set the

main switch at "S” for singie frame shooting or "C" for con

tinuous shooting.

* When the power winder is mounted on an AL-1, AE-1,

AV-1, or AT-1 camera, continuous photography is possibie

on either the "C” or "S" setting as iong as you press the

shutter button down. For single frame shooting with the

main switch at “C" or "S", press the shutter button down

once, then remove your finger from the button.

* in generai, the fiim will be advanced at a rate of about two

frames p>er second.

* When the main switch is turned to "OFF," the fiim can be

advanced manuaiiy with the fiim advance iever.

* The main switch should be set to “OFF” whenever the

power winder is not in use.