ENGLISH DIGITAL CAMERA Camera User Guide Camera User Guide CDI-E107-010 XXXXXXXXX © 2003 CANON INC. PRINTED IN JAPAN • Please start by reading the “Read This First” section on page 6 of this manual. • Please also see the Software Starter Guide and the Direct Print User Guide.
Flowchart and Reference Guides ● ● Digital Zoom ●* ●* This Guide Exposure Compensation – ● Shooting with the●Camera Evaluative Metering ● Light Metering Center-Weighted Averaging – – SystemSoftware Starter Guide Spot Metering – – White Balance (3) –(2) ● Installing the Software Photo Effect – ● ISO Speed –(3) –(3) This Guide On ● ● ? Connecting the Camera to a●Computer Off ● On Off Reference Page ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● –
Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.
About this Camera User Guide Symbols Used Icons under title bars show the operations mode. As in the , , , example below, the mode dial should be set to , , , , , , , , or . Using the Flash Available in the following modes. : This mark denotes issues that may affect the camera’s operation. : This mark denotes additional topics that complement the basic operating procedures. Question? Look here first.
Quick Start Preparing the Camera, Basic Functions Shooting Playback, Erasing Print Settings, Transferring Connecting My Camera Settings Menu and Message Lists Appendix 1
Table of Contents : These pages include summaries of the functions or operation of the camera. Read This First 6 Quick Start 14 Components Guide 16 Preparing the Camera 20 Installing the Batteries ........................................................... 20 Installing a CF Card ............................................................... 24 Setting the Date/Time ............................................................ 26 Setting the Language ................................................
Panoramic Images (Stitch Assist Mode) ........................ 72 Movie Mode .................................................................... 76 Macro Mode .................................................................... 78 Self-Timer .............................................................................. 80 Digital Zoom ........................................................................... 82 Continuous Shooting .............................................................
Erasing 136 Erasing Images Individually ................................................. 136 Erasing All Images ............................................................... 137 Formatting a CF Card .......................................................... 138 Print Settings 140 About Printing ...................................................................... 140 Print Settings (DPOF Print Settings) ...................................
Camera Care and Maintenance ..........................................
Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Safety Precautions • Before using the camera, please ensure that you have read and understood the safety precautions described below. Always ensure that the camera is operated correctly. • The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
WARNINGS • Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. • Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury.
• Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in fire or electrical shock. Immediately turn the camera’s power off, remove the camera batteries or unplug the power cord from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk. • Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior.
• Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. Use only the recommended power accessories. • Do not place the batteries near a heat source or expose them to direct flame or heat. Neither should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.
• Disconnect the battery charger or the compact power adapter from both the camera and power outlet after recharging and when the camera is not in use to avoid fires and other hazards. • The camera terminal of the battery charger cord and the compact power cord is designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards.
• Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash. • If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for an extended period as your hands may experience a burning sensation.
Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.
Quick Start the batteries 1 Install (p. 20). Slide the battery cover lock, then open the cover and insert the batteries. • For important information about batteries, see Proper Battery Handling (p. 21). 2 Install the CF card (p. 24). Open the CF card slot cover and insert a CF card. • Push the CF card all the way into the slot, so that the CF card eject button pops all the way out. the LCD monitor (p. 34) and press 3 Open the ON/OFF button to turn the camera on (p. 31).
Quick Start mode dial to 5 Turn(p.the56). 6 Focus (p. 44). Aim the camera at the subject, and lightly press and hold the shutter button halfway down. The camera beeps twice when the focus is set. 6, 7 (p. 45). 7 Shoot Press the shutter button all the way. You will hear the sound of the shutter close when the shot is complete. 8 View the recorded image. The recorded image displays on the LCD monitor for approximately 2 seconds (p. 58).
Components Guide Zoom Lever (p. 43, 82, 123, 124, 125) Shutter Button (p. 44) Shooting Mode Dial (p. 19) Power Indicator (p. 31) ON/OFF Button (p. 31) Speaker Optical Viewfinder Window (p. 42) AF-assist Beam (p. 46) Red-Eye Reduction Lamp (p. 66) Self-Timer Lamp (p. 80) Flash (p. 64) Terminal Cover Ring Release Button Lens Ring Microphone (Audio/Video Out) Terminal (p.
Attaching the wrist strap*1 CF Card Slot Cover (p. 24) Viewfinder (p. 42) Strap Mount DC IN Terminal (p. 185) Tripod Socket Battery Cover Lock (p. 20) Battery Cover (p. 20) *1 Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap. *2 To connect the camera to a computer or printer, use one of the following cables.
Mode Switch (p. 33) (Flash) / Up Button (p. 47, 64) Right Button (p. 47) (Macro) / MF / Down Button (p. 47, 78, 114) Button (p. 36) / (Single image erase) Button (p. 47, 136) Left Button (p. 47) Button (p. 48) Button (p. 48) Indicators The indicators light or blink when the ON/OFF button or the shutter button is pressed.
Shooting Mode Dial Preparing the Camera, Basic Functions Use the shooting mode dial to select a shooting mode. e Zone eativ Cr Auto n Im age Zo • e : Auto (p. 56) The camera automatically selects settings. • Image Zone The camera automatically selects settings according to the image composition type. : Portrait (p. 67) : Landscape (p. 68) : Night Scene (p. 69) : Fast Shutter Speed (p. 70) : Slow Shutter Speed (p. 71) : Stitch Assist (p. 72) : Movie (p.
Preparing the Camera Installing the Batteries The camera uses four AA-size alkaline batteries supplied with the camera. You may also use separately sold nickel metal hydride (NiMH) batteries. 1 Be sure that the camera power is off. the battery cover lock in the 2 Slide direction of the arrow, and push the battery cover slightly forward. Then open the cover. 3 Insert the batteries as shown. Positive end (+) Negative end (−) 4 Close the battery cover.
• We recommend that you use the separately sold AC Adapter Kit ACK600 to power the camera during long usage sessions (p. 184). • The separately sold battery charger kit lets you use rechargeable NiMH batteries to power the camera (p. 182). • For important information, see Battery Performance (p. 202). • For information about the Battery and Charger Kit and AA-size rechargeable NiMH batteries, see the System Map (separate from this guide).
• Be careful to load the batteries with their positive (+) and negative (-) ends in the right direction. • Never mix batteries of different types or from different manufacturers. All four batteries should be identical. • Before inserting the batteries, wipe the battery terminals well with a dry cloth. Oil from one’s skin or other dirt may cause a considerable reduction in the number of recordable images or reduced usage time.
Never use batteries that look like this. Preparing the Camera, Basic Functions Batteries with all or part of the seal (electrical insulation sheath) peeled off. The positive electrode (plus terminal) is flat. The negative terminal is correctly formed (protruding from the metal base), but the seal does not extend up over the edge of the metal base.
Installing a CF Card Installing a CF Card 1 Be sure that the camera is turned off. the CF card slot cover in the 2 Slide direction of the arrow, and open it. the CF card with the label facing out 3 Insert and the arrow pointing in. • Insert the CF card all the way into the slot, so that the CF card eject button pops all the way out. Arrow mark Card label CF card eject button • To remove the CF card, press the CF card eject button.
• When the indicator on the left side of the viewfinder blinks green, the camera is writing, reading, erasing or transmitting an image to or from the card. Do not perform the following, for image data may be lost or corrupted: - Do not shake the camera. - Do not turn off the power or open the CF card slot cover. • Be aware that use of CF cards whose contents have been edited with another camera or with another company’s software may cause the camera to operate incorrectly.
Setting the Date/Time The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium date/time battery charge is low. Start from Step 5 to set the date and time. the ON/OFF button to turn on the 1 Press camera (p. 31). the LCD monitor (p. 34) and press 2 Open the button. The [ (Rec.)] or [ (Play)] menu appears. [ (Rec.)] menu in Auto mode shown. the [ (Set up)] menu using the left 3 Select or right button.
the up or down button to select 4 Press (Date/Time), and then press the Preparing the Camera, Basic Functions button. 5 Set the date and time. • Use the up or down button to change the value of the highlighted field. • Press the left or right button to highlight another field. • The date can be set up to the year 2030. 6 Press the button. After adjusting the settings, press the close the menu window.
• The date, time and other camera settings may reset to the default settings if the batteries have been removed for more than three weeks. • Setting the date and time settings does not cause the date/time stamp to appear on images. For printing images with the date on them, refer to the Direct Print User Guide and Software Starter Guide. Charging the date/time battery • The camera has a built-in rechargeable lithium battery for saving settings such as the date and time.
Setting the Language the ON/OFF button to turn on the 1 Press camera (p. 31). the LCD monitor (p. 34) and press 2 Open the button. The [ (Rec.)] or [ (Play)] Menu will display. [ (Rec.)] menu in Auto mode shown. the [ (Set up)] menu using the left 3 Select or right button. 29 Preparing the Camera, Basic Functions Use this feature to select the language for the LCD monitor display.
Select (Language) using the up or down 4 button and press the button. a language using the up, down, left 5 Select or right button. 6 Press the button. After adjusting the settings, press the button. Shortcut Operation The Language menu can also be displayed in Playback mode by holding down the button and pressing the button. This function cannot be used while a movie clip is played back, or a separately sold printer is connected to the camera.
Basic Functions Turning the Power On Preparing the Camera, Basic Functions the ON/OFF button until the power 1 Press indicator lights. Shooting Mode If the LCD monitor is open, the current shooting mode settings appear for about 6 seconds. If you slide the mode switch to after approximately 1 minute. , the lens will retract Playback mode The LCD monitor displays an image. The LCD monitor must be opened (p. 34). Turning the Camera Off Press the ON/OFF button again to turn the power off.
• You will hear a start-up sound and see the start-up image when the power is turned on. (To change the start-up sound and image, see below and pages 157 and 176.) • The start-up image does not appear when the LCD monitor is off or the camera is connected to a TV. Turning on the camera without the start-up sound and image Press and hold the button, then turn on the power. Power Saving Function This camera is equipped with a power saving function.
Switching between Shooting and Playback Preparing the Camera, Basic Functions You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or deleting an image immediately after it is shot. Shooting Mode Playback Mode The lens does not retract right away when the camera switches to Playback mode. When shooting (Shooting mode) • Slide the mode switch to .
Using the LCD Monitor The LCD monitor can be used to check an image during shooting, to play back recorded images or to adjust menu settings. It can be opened to the following range of positions. Opened right to left 180 degrees. Tilted forward 180 degrees toward the lens or backward 90 degrees. The LCD monitor will automatically turn off when it clicks shut against the camera body. For protection, always close the LCD monitor after use.
The LCD monitor can also be positioned as below. • In this position, icons and messages do not appear on the LCD monitor. • The image shown on the LCD monitor is automatically flipped and reversed so that it appears correctly from in front of the lens. (This reverse display function can be turned off. (p. 169)) the LCD monitor back against the 2 Fold camera body. • Fold it until it clicks into place against the camera body.
The image in the LCD monitor may darken when the monitor is used under sunlight or other strong lighting. This is not a defect. Shooting Mode Pressing the button cycles the LCD monitor to the next mode each time the button is pressed. Standard (No Information) Detailed (Information View) Off • The on/off setting of the LCD monitor display mode is memorized when the camera is turned off. When the camera is turned on again it assumes the last mode.
Playback Mode • Pressing the button cycles the information view mode each time the button is pressed. Single Image Playback Standard Detailed No display Index Playback (9 images) Standard No display Information Displayed on the LCD Monitor Shooting Mode When a Shooting mode setting is changed, the settings appear on the LCD monitor for about 6 seconds even if the LCD monitor is set to Standard or No display. (The Shooting mode settings may not appear depending on the camera setting.
A slow shutter speed has likely been selected because of insufficient lighting if the upper indicator beside the viewfinder blinks orange after the metering preparations are complete and the camera shake icon displays in the LCD monitor. Set the flash to or , or affix the camera to a tripod to shoot. • After you press the shutter button and take a shot, the recorded image appears on the LCD monitor for 2 to 10 seconds (1-second increments).
L M1 M2 S ● (red) 4.3× 5.3× 6.7× 8.2× 11× p. 19 Exposure Compensation White Balance Drive Mode ISO Speed Photo Effects Light Metering Mode Compression Resolution Flash Red-Eye Reduction Macro Mode Auto Rotate Function Manual Focus Movie Recording Mode Digital Zoom Setting* Camera Shake Warning Low Battery p. 99 p. 102 p. 80/84 p. 109 p. 107 p. 97 p. 60 p. 60 p. 64 p. 65 p. 78 p. 118 p. 114 p. 76 p. 82 p. 38 p.
Playback Mode In standard display mode, the following information appears. File Number Compression L M1 M2 S Resolution (Still images) Sound memo (WAVE file) Movie Protection status p. 60 p. 60 p. 132 p. 126 p. 135 Shooting Date/Time Image Number and Total (Display Image/Total) In detailed display mode, the following information appears. Histogram Movie Length Shutter Speed Aperture Value -2 ⋅⋅⋅ ±0 ⋅⋅⋅ +2 Shooting Mode p.
The following information may also appear with some image files. Preparing the Camera, Basic Functions An audio file other than a wave file, or a file with an unrecognized format, is attached. A JPEG file not supported by “Design rule for Camera File system” (DCF) standards. RAW format file A file with an unrecognized format.
Using the Viewfinder to Shoot Setting the LCD monitor to off (p. 36) and using the optical viewfinder can help conserve power while shooting. the square brackets (autofocus 1 Align metering field) inside the viewfinder on the primary subject to compose the image. Shows the center of the image Viewfinder About the Autofocus Function This camera employs AiAF (artificial intelligence autofocus) technology which uses a broad metering field to calculate the focal distance with high precision.
Using the Zoom Preparing the Camera, Basic Functions The zoom can be adjusted from 38 mm to 114 mm in 35mm film equivalent terms. Wide/Telephoto Angle : Wide-angle Press the zoom lever left to zoom out for a wideangle shot. Wide-angle : Telephoto Press the zoom lever right to zoom in for a telephoto shot. Telephoto Digital Zoom When the LCD monitor is on you can digitally zoom in on a subject. The combined optical and digital zoom is approximately 11 times the wide angle setting (p. 82).
Pressing the Shutter Button The shutter button features a two-stage action. Pressing Halfway Pressing halfway automatically sets the exposure, focus and white balance. The indicators light or blink as follows.
Pressing Fully Preparing the Camera, Basic Functions Pressing fully releases the shutter. • You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound. • The upper indicator blinks green while the image is recording onto the CF card.
• If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot. • Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. • The beep and shutter sound can be set on/off in the Set up menu (p. 172). • Even when the shutter sound is set to [ , , (On)] (p. 157) and [Mute] is set to [On], no sound will be heard.
Menus are used to adjust shooting, playback, date/time and electronic sound settings. Menus can be displayed by either pressing the button or the button. Watch the LCD monitor while performing the following procedures. Selecting Settings by Pressing the (Only in Shooting Mode) Button LCD monitor and press the 1 Open the button. • Icons of the selectable settings appear on the left side of the LCD monitor. • The current settings icons appear. a menu item using the up or down 2 Select button.
setting contents using the left or 3 Select right button. Some menu items can only be selected after pressing the button and displaying the next menu. Press the button again to confirm the setting. 4 Press the button. • The menu closes. • Images can be shot immediately with the selected settings after Step 3 by pressing the shutter button. Selecting Settings by Pressing the Button LCD monitor and press the 1 Open thebutton. In Shooting mode, the [ (Rec.)] menu appears.
Preparing the Camera, Basic Functions • The menu switches as follows: (Rec.)] or [ (Play)] [ (Set up)] [ [ (My Camera)] • Pressing the zoom lever also switches between the menu tabs. a menu item using the up or down 3 Select button. setting contents using the left or 4 Select right button. For the items followed by an ellipsis (...), press the button to show submenus and select a setting. After selecting, press the button again to confirm the setting. Some of the items followed by an ellipses (...
Selecting Menus and Settings (continued) Displaying a MENU Switching Shooting Mode FUNC. Menu Shooting Mode Rec. Menu* Selectable items vary according to each mode.
Setting Options Completing the Procedure Preparing the Camera, Basic Functions between Menus Set up Menu* My Camera Menu* * Use the zoom lever to switch between menus anytime.
Menu Settings and Default Settings This chart shows the options for each menu and the default settings. Some menu items are not available in certain Shooting modes (p. 212).
button Reference Page AiAF On*/Off 96 Red-eye On*/ Off 65 MF-Point Zoom On*/ Off 115 AF-assist Beam On*/ Off 168 Digital Zoom On / Off* 82 Review Off / 2* to 10 sec. 59 Reverse Disp.
Menu Item My Camera Menu Set up Menu Mute Volume Available Settings On / Off* Start-up Vol. Operation Vol. Selftimer Vol. Off / 1 / 2* / 3 / 4 / 5 Shutter Vol. Playback Vol. Power Auto Power Down On* / Off Saving Display Off 10sec/20sec/30sec/ 1min*/2min/3min Date/Time Sets the date and time Format Formats the CF card File No.
Preparing the Camera, Basic Functions • You can apply a desired image and sound to and in the My Camera menu. For details, see Registering My Camera Settings (p. 160) or the Software Starter Guide. • Various camera settings can be restored all at once (p. 178).
Shooting-Letting the Camera Select Settings See Functions Available in Each Shooting Mode (p. 212) at the end of this manual to find out which settings can be changed in which shooting modes. Auto Mode Available in the following modes. In this mode, all you have to do is press the shutter button and let the camera do everything else. that the camera is in Shooting 1 Check mode (p. 33). 2 Turn the shooting mode dial to . 3 Aim the camera at the subject.
• Press the button halfway to make the camera focus on a subject. Two beeps will sound when the camera has finished metering and the indicator next to the viewfinder will light green or orange. If the LCD monitor is on, the AF frame or frames will appear green. • The indicator beside the viewfinder will blink yellow and one beep will sound if the subject is difficult to focus on. AF Frames 6 Press the shutter button all the way (p. 45). • You will hear the sound of the shutter when the shutter releases.
Reviewing an Image Right After Shooting Available in the following modes. After a photo is taken, the image displays on the LCD monitor for two seconds. There are two ways to display the image for longer as explained below. • Keeping the shutter button pressed The image continues to appear on the LCD monitor as long as you keep the shutter button fully depressed.
Changing the Image Display Duration The length of time images are displayed after a photo has been taken can be changed from between 2 seconds to 10 seconds or turned off. 1 In the [ (Rec.)] menu, select (Review). Shooting See Selecting Menus and Settings (p. 47) Review setting and press the 2 Select abutton. • With the [Off] option, the image will not automatically display. • With the [2 sec.] to [10 sec.] options, the image will appear for the time selected.
Changing the Resolution and Compression Available in the following modes. You can change the resolution and compression (excluding movies) settings to suit the purpose of the image you are about to shoot. Resolution Purpose High • Print up to A4 size* 210 x 297 mm (8.3 x L 11.7 in.) prints 2272 x 1704 pixels • Print up to Letter size* (Large) 216 x 279 mm (8.5 x 11 in.) prints • Print postcard size 148 x M1 100 mm (6 x 4 in.) prints 1600 x 1200 pixels (Medium 1) • Print L-size 119 x 89 mm (4.7 x 3.5 in.
Movies can be shot with the following resolutions. Resolution 320 x 240 pixels 160 x 120 pixels Shooting 1 Open the LCD monitor. the shooting mode dial to the desired 2 Set Shooting mode. button. 3 Press the L* (2272 x 1704) using the up or 4 Select down button. * The current setting is displayed. the resolution you wish to set using 5 Select the left or right button.
6 Press the button. the compression you wish to set 7 Select using the left or right button. • You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. button returns to Step 4 where you can • Pressing the change the resolution setting. button. 8 Press the 9 Shoot the image.
Current Shooting Mode Next Shooting Mode Resolution and Compression after Change Settings change to those of the next mode Settings do not change Settings change to those of the next mode Settings do not change Settings change to those of the next mode 63 Shooting • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 212) • Size of an image file (approximate) (p. 203) • Types of CF cards and resolution (p.
Using the Flash Available in the following modes. Use the flash according to the guidelines below. Auto with red-eye reduction Auto Flash on with redeye reduction Flash on Flash off The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires. The flash fires automatically as required by the lighting level. The red-eye reduction lamp and the flash always fire. The flash always fires. The flash does not fire.
When the red-eye reduction function is off This operation may not work in certain shooting modes (p. 212). Shooting 2 Shoot the image. • The flash will fire if the indicator beside the viewfinder lights orange when the shutter button is pressed halfway. (Does not fire in .) mode • Shooting procedures are the same as for the (p. 56). Setting the Red-eye Reduction Function The red-eye reduction lamp fires when the flash is used in dark areas.
• Red-Eye Reduction When shooting with the red-eye reduction function, the subjects must look right at the red-eye reduction lamp for this mode to be effective. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject. • Some settings are not available with certain shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 212).
Portrait Mode Available in the following modes. Use this mode when you want the subject to appear sharp and the background to blur. Shooting procedures are the same as for the (p. 56). Shooting the shooting mode 1 Turn dial to . Mode • For functions available in this mode, see page 212. • To best achieve the effect of the background gradually blurring, compose the image so that the upper half of the subject’s body fills most of the viewfinder or LCD monitor.
Landscape Mode Available in the following modes. Use this mode to shoot spacious landscape scenes. the shooting mode 1 Turn dial to . Shooting procedures are the same as for the (p. 56). Mode • For functions available in this mode, see page 212. • Since a slow shutter speed is often selected in mode, use a tripod to shoot if the (camera shake warning) icon appears on the LCD monitor.
Night Scene Mode Available in the following modes. 1 Turn the shooting mode dial to Shooting Use this mode to capture human subjects against the backdrop of an evening sky or night scene. The subject is illuminated with light from the flash while the backdrop is captured at a slow shutter speed so that both appear correctly exposed. . Shooting procedures are the same as for the (p. 56).
Always use a tripod to prevent camera shake in this mode. • For functions available in this mode, see page 212. • Warn people to stay still for a few seconds after the flash fires because of the slow shutter speed. mode in daylight will produce an effect • Using the similar to that of the mode. Fast Shutter Available in the following modes. Use this mode to shoot fast moving objects. the shooting mode 1 Turn dial to . Shooting procedures are the same as for the (p. 56).
Slow Shutter Available in the following modes. Use this mode to shoot moving objects to make them appear blurred, such as river rapids. Shooting procedures are the same as for the (p. 56). Shooting the shooting mode 1 Turn dial to . mode Always use a tripod to prevent camera shake in this mode. For functions available in this mode, see page 212.
Panoramic Images (Stitch Assist Mode) Available in the following modes. Use this mode when taking shots that you want to combine into a panorama. To create the panorama itself, you must stitch the images together with your computer. To create the panorama with your computer, use the PhotoStitch software that came with your camera. Framing a Subject The PhotoStitch program detects the overlapping portions of adjoining images and merges them.
Shooting • Compose each frame so that it overlaps 30 to 50% of the adjoining image. Try to keep the vertical misalignment to within 10% of the image height. • Do not include moving items in the overlap. • Do not try to stitch images that include both distant and close items. Objects may appear warped or doubled up. • Make the brightness in each image consistent. The final image will appear unnatural if the difference in brightness is too great.
the shooting sequence using the 2 Select left or right button and press the button. You can also press the shutter button directly to shoot without pressing . 3 Shoot the first image. The exposure and white balance settings are set and locked with the first image. and shoot the second image so 4 Compose that it overlaps the first. Sequence • Minor discrepancies in the overlap can be corrected with the software. • An image can be retaken. Press the left or right button to return to that frame.
the same procedures to shoot the 5 Use remaining frames. A maximum of 26 images can be recorded either horizontally or vertically. button after the last shot. Shooting 6 Press the • A custom white balance setting (p. 104) cannot be set in mode. To use a custom white balance setting, first set it in another shooting mode. • The settings in place for the first image are locked in and cannot be changed for subsequent shots. • A TV cannot be used as the monitor for shooting in this mode.
Movie Mode Available in the following modes. Use this mode to shoot movies. The resolution can be set to either [ (320 × 240)] or [ (160 × 120)] (p. 60). the LCD monitor and turn the 1 Open shooting mode dial to . The LCD monitor will be on and displays the maximum recording time (in seconds). 2 Press the shutter button all the way. • Shooting and sound recording starts simultaneously. • During the shooting a red circle appears in the upper right of the LCD monitor.
• • • • For functions available in this mode, see page 212. Sound is recorded monaurally. There is no shutter sound in movie mode. QuickTime 3.0 or higher is required to playback movie files (AVI/Motion JPEG) on a computer. (QuickTime (for Windows) is bundled on the supplied Digital Camera Solution Disk. On the Macintosh platform, QuickTime 3.0 or later is generally bundled with the Mac OS 8.5 or later operating system.
Macro Mode Available in the following modes. Use the macro mode to shoot close-ups of subjects in the range of 5 to 45 cm (2.0 in. to 1.5 ft.) at wide angle end and 25 to 45 cm (10 in. to 1.5 ft.) at telephoto end. Use to take close-up shots of flowers or small objects. the LCD monitor and press the 1 Open button to turn the LCD monitor on. 2 Press the • The button. icon appears on the LCD monitor. • Pressing the button until the icon on the LCD monitor disappears cancels the macro mode.
Advanced technique for the macro mode Shooting Macro mode can make unique images when used with the zoom function. For example, shooting a flower at maximum wide angle in Macro mode allows the camera to bring both the flower and the background into focus. However, shooting at maximum telephoto can throw the background out of focus to make the flower stand out. Macro with the wide angle zoom Macro with the telephoto zoom • Some settings are not available with certain shooting modes.
Self-Timer Available in the following modes. With this function, images are shot 10 or 2 seconds after the shutter button is pressed. This is useful when you want to take a memorable photo with everyone including yourself in the picture. The self-timer can be used in any shooting mode. LCD monitor and press the 1 Open the button. Select * (Drive Mode) using the up or 2 down button. * The current setting is displayed. Select or using the left or right button 3 and press the button.
4 Shoot the image. Shooting • When is selected and the shutter button is pressed fully, the self-timer lamp starts blinking and the self-timer begins to beep. The blinking gets faster two seconds before the shutter releases. • When is selected, the self-timer lamp blinks fast from the beginning. The shutter releases in two seconds. • Shooting procedures are the same as for the mode (p. 56). Tip for using the self-timer Normally the camera shakes a little when you press the shutter button.
Digital Zoom Available in the following modes. The digital zoom can be zoomed through the following range: 4.3x, 5.3x, 6.7x, 8.2x, and 11x the LCD monitor and press the 1 Open button to turn the LCD monitor on. In the [ 2 Zoom). (Rec.)] menu, select (Digital See Selecting Menus and Settings (p. 47). [On] using the left or right button 3 Select and press the button.
4 Press the zoom lever toward and hold it. Shooting • The lens will zoom to the maximum optical telephoto setting and stop. Release the lever and press it toward again to further zoom the image digitally. • Press the lever toward to zoom back out. The combined magnifications of the optical zoom and digital zoom are displayed. 5 Shoot the image. Shooting procedures are the same as for the (p. 56). mode The digital zoom cannot be used when the LCD monitor is off.
Continuous Shooting Available in the following modes. Use this mode to shoot successive frames while the shutter button is fully pressed. Standard Continuous Shooting High-speed Continuous Shooting Use this mode to view the images on the LCD monitor as you shoot continuously. The shutter interval is longer in this mode than in mode. Use this mode to shoot continuously with a short shutter interval. You cannot check images while shooting continuously. LCD monitor and press the 1 Open the button.
the shutter button halfway to lock 4 Press the focus. the shutter button all the way to 5 Press shoot. Shooting • Shooting will stop when the shutter button is released. • The shooting speed is as follows. When is selected: Approx. 1.6 frames per second* When is selected: Approx. 2.4 frames per second* * Large/Fine, LCD monitor off mode. (These figures reflect Canon’s testing standard. The actual figures will vary according to the shooting conditions and settings.
Shooting-Selecting Particular Effects Camera settings such as shutter speed and aperture can be freely changed for shooting. See Functions Available in Each Shooting Mode (p. 212) at the end of this manual to find out which settings can be changed in which shooting modes. Please see Mode (p. 56) for shooting procedures once you have changed a setting. Program AE Available in the following modes.
Shooting 2 Shoot the image. • The shutter speed and aperture value will automatically appear on the LCD monitor. • The correct exposure has been set if the shutter speed and aperture value show in white. • For functions available in this mode, see page 212. • If a correct exposure cannot be obtained, the shutter speed and aperture value show in red on the LCD monitor. Use the following methods to obtain the correct exposure and make them show in white. - Use the flash. - Change the ISO speed setting.
Setting the Shutter Speed Available in the following modes. When you set the shutter speed in the shutter-priority AE mode, the camera automatically selects an aperture value to match the brightness. Faster shutter speeds allow you to catch an instantaneous image of a moving subject while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas. the LCD monitor and turn the 1 Open shooting mode dial to . The shutter speed appears on the LCD monitor.
The correct exposure has been set if the shutter speed and aperture value show in white. • If the aperture value shows in red, the image is under exposed (insufficient light) or overexposed (too much light). Adjust the shutter speed using the left and right buttons until the aperture value display turns to white. • The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds.
• For functions available in this mode, see page 212. • Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. • The aperture value and shutter speed change according to the zoom state as follows. Aperture Wide Angle Telephoto F 2.8 F 3.2 – 4.0 F 4.5 – 8.0 F 4.9 F 5.6 – 7.1 F 8.
Setting the Aperture Available in the following modes. Shooting The aperture adjusts the amount of light that passes through the lens. Selecting a lower aperture value (opening the aperture) allows you to blur the background. A higher aperture value (closing it) brings the entire range from foreground to background into focus. the LCD monitor and turn the 1 Open shooting mode dial to . The aperture value appears on the LCD monitor. a value using the left or right 2 Select button.
3 Shoot the image. The correct exposure has been set if the shutter speed and aperture value show in white. • If the shutter speed shows in red on the LCD monitor, the image is under exposed (insufficient light) or overexposed (too much light). Adjust the aperture value using the left and right buttons until the shutter speed display turns white. • Some aperture values may not be available with certain zoom positions (p. 90).
Aperture Value Display The larger the aperture value, the smaller the lens aperture. F2.8 F3.2 F3.5 F4.0 F4.5 F4.9 F5.0 F5.6 F6.3 F7.1 F8.0 93 Shooting • For functions available in this mode, see page 212. • Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. • In this mode, the shutter speed range with synchronized flash is 1/60 second to 1/500 second.
Manually Setting the Shutter Speed and Aperture Available in the following modes. You can manually set the shutter speed and aperture to achieve a particular effect. This is convenient for shooting fireworks and other images where it is difficult to set the correct exposure automatically. the LCD monitor and turn the 1 Open shooting mode dial to . The shutter speed and aperture value appears on the LCD monitor. the setting (the shutter speed or the 2 Select aperture value) by pressing the button.
When you press the shutter button halfway, a number indicating the difference between the standard exposure* and the selected exposure appears on the LCD monitor. If the difference is more than ±2 stops, “-2” or “+2” appears in red. * The standard exposure is calculated by the AE function according to the selected metering mode. • For functions available in this mode, see page 212.
Switching Between Autofocus Modes Available in the following modes. You can change the auto focus frame (AF frame) selection method. The AF frame will appear when the LCD monitor is turned on (p. 44). On (Auto Selection) Off (Center) The camera automatically selects between nine AF frames to focus according to the shooting conditions. Of nine AF frames, the middle one is selected to focus. This is convenient for making sure the focus is exactly where you want it.
Switching Between Light Metering Modes Available in the following modes. Evaluative Light Metering Center-Weighted Averaging Spot AE Point 1 Press the Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering.
Select * (Evaluative) using the up or 2 down button. * The current setting is displayed. a light metering mode using the left 3 Select or right button. button. 4 Press the 5 Shoot the image. Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p.
Adjusting the Exposure Available in the following modes. 1 Press the Select 2 button. Shooting Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background. button. * (+/- (Exp.)) using the up or down * The current setting is displayed.
a setting using the left or right 3 Select button. • The settings can be adjusted in 1/3 stops in the range of -2EV to +2EV. • The result of adjustment can be checked on the LCD monitor when it is on. • You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. 4 Press the button. To cancel the exposure compensation, return the setting to using the left or right button. 5 Shoot the image.
How to adjust the exposure This camera automatically adjusts the exposure to shoot images with the optimal brightness. However, recorded images may sometimes be brighter or darker than the actual image depending on the shooting conditions. If this happens, adjust the exposure compensation manually. Underexposure Shooting The whole recorded image is dark, which makes white elements of the image appear gray. Shooting bright subjects or in backlit conditions may cause the image to be underexposed.
Adjusting the Tone (White Balance) Available in the following modes. When the white balance mode is set to match the light source, the camera can reproduce colors more accurately. Auto Day Light Cloudy Tungsten Fluorescent Fluorescent H Custom 1 Press the 102 The camera sets the white balance automatically according to shooting conditions. Use when shooting outdoors in sunlight on a clear day. Use when shooting outdoors and the sunlight is not enough such as under cloudy skies, in shade or at dusk.
* (Auto) using the up or down Shooting 2 Select button. * The current setting is displayed. the desired setting using the left or 3 Select right button. • Please see the next page regarding the custom setting. • When the LCD monitor is on, you can check the setting on the display. • You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image in shot. button. 4 Press the 5 Shoot the image.
Setting a Custom White Balance You can set a custom white balance to obtain optimal settings for your particular shooting conditions by having the camera evaluate a subject such as a white piece of paper, cloth or a photo-quality gray card. In the following three situations the white balance may not be correctly adjusted in the (Auto mode). Always shoot after reading and setting the white balance data in (Manual mode).
(Custom) using the left or right the camera at the white paper, cloth or 4 Aim gray card and press the button. • Aim the camera so that the white paper, cloth or gray card, completely fills the frame on the LCD monitor screen or the entire viewfinder before pressing the button. When you press the button, the camera reads the white balance data. • You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot. button.
• Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 212) • To set and use a custom white balance setting, it is advisable to select the shooting mode and set the exposure compensation and flash exposure compensation to zero (±0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).
Changing the Photo Effect Available in the following modes. You can shoot with different photo effects. Records with no effect. Emphasizes the contrast and color Vivid saturation to record in bold color. Tones down the contrast and color Neutral saturation to record neutral hues. Low Sharpening Records subjects with softened outlines. Sepia Records in sepia tones. B/W Records in black and white. button. 1 Press the * (Effect Off) using the up or 2 Select down button. * The current setting is displayed.
the desired setting using the left or 3 Select right button. • If the LCD monitor is on, you can check the results by viewing the image on the LCD monitor. • A shot can be taken immediately after by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting. button. 4 Press the 5 Shoot the image.
Changing the ISO Speed Available in the following modes. Shooting Raise the ISO speed when you wish to reduce camera shake, when turning the flash off for use in dark conditions, or when a fast shutter speed is required. button. 1 Press the * (ISO Speed) using the up or 2 Select down button. * The current setting is displayed. the desired setting using the left or 3 Select right button. You can shoot the image right after selecting settings by pressing the shutter button.
button. 4 Press the 5 Shoot the image. ISO speed The ISO speed is the numeric representation of the camera’s sensitivity to light. The higher the ISO speed, the higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake. This is convenient when shooting images in places where flash photography is prohibited.
Adjusting the Flash Output In mode, the flash output can be controlled in three steps, starting from FULL, when shooting. When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject. button. 1 Press the Select (Flash Output) using the up or 2 down button.
Shooting Problem Subjects for the Autofocus Available in the following modes. The autofocus may not work well on the following types of subjects.
it pressed while you recompose the 4 Keep image and press the shutter button all the way to shoot the image. Press the 1 monitor. button to turn on the LCD the shutter button halfway to lock 2 Press the focus. Keep it pressed and press the MF button. • The MF icon appears on the LCD monitor. • The focus setting will lock even if the shutter button and the MF button are released. • The manual focus setting will cancel if the MF button is pressed again.
Shooting in Manual Focus Mode The focus can be manually set. the 1 Press monitor. button to turn on the LCD 2 Press the MF button until MF appears. MF indicator • The MF indicator appears. • The MF indicator shows approximate figures. Use them as a shooting guideline only. • In the , , or modes, pressing the button cycles the selection between the shutter speed, the aperture value, and the MF indicator. (A green 1 appears next to the selected item). 3 Use the left or right button to focus.
• When the (MF-Point Zoom) setting in the [ (Rec.)] menu is [On], the AF frame is magnified.* * Enlargement does not occur when shooting in or when using the digital zoom. * You can choose not to have the AF frame magnified (p. 168). • In manual focus, the AF frame locks on the center frame. • You can use manual focus in the macro focal distance 5 to 45 cm (2.0 in. to 1.5 ft.) at wide angle end and 25 to 45 cm (10 in. to 1.5 ft.) at telephoto end. In this case, the fine scale is adopted.
Saving Custom Settings Available in the following modes. You can save frequently used shooting modes and various shooting settings to the (custom) mode. This camera is equipped with two modes ([ ] and [ ]), allowing you to save two types of custom settings. When necessary, you can then shoot images with previously saved settings by simply turning the mode dial to or .
the [ (Rec.)] menu, select 3 InSettings). (Save Shooting See Selecting Menus and Settings (p. 47). [ 4 Select button. ] or [ ] and press the Selects a save destination ( 5 Press the or ). button. • When you wish to re-save partially modified settings (except shooting mode) that were previously saved in the / mode, select / in Step 1. • The settings do not influence other shooting modes. • Saved settings can be reset (p. 178).
Setting the Auto Rotate Function This camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display. You can set this function on/off. In the [ 1 Rotate). (Set up)] menu, select (Auto See Selecting Menus and Settings (p. 47). 2 Select [On] and press the button.
• When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance and exposure for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. • When changing the camera’s orientation between the horizontal and vertical positions, you may hear noise coming from the orientation detection mechanism. This is not a malfunction.
Resetting the File Numbers You can select the way file numbers are assigned. On Off The file numbers are reset to the start (100-0001) each time a new CF card is inserted. New images recorded on CF cards with existing files are assigned the next available number. The file number of the last image to be shot is memorized so that images recorded to a new CF card start from the next number. In the [ (Set up)] menu, select 1 No. Reset). (File See Selecting Menus and Settings (p. 47).
Setting the [File No. Reset] to [Off] is useful for avoiding file name duplication when images are downloaded to a computer. 100 0001 0002 0099 0100 101 0101 0102 0199 0200 198 9801 9802 9899 9900 Shooting About File and Folder Numbers Images are assigned file numbers from 0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits). Folder numbers cannot contain 99 in the last two digits.
Playback Displaying Images Individually You can view the recorded images on the LCD monitor. 1 Open the LCD monitor. The position of the LCD can be adjusted to suit your viewing position. 2 Slide the mode switch to . The last recorded image appears (single image playback). between images using the left or 3 Move right button. Use the left button to move to the previous image and the right button to move to the next.
Magnifying Images Images can be magnified up to approximately 10 times. . Approximate position • You can move around the magnified image using the left, right, up or down button. • Hold the button down and press the zoom lever toward to cycle through each setting, approximately 2.5 times, to approximately 5 times and 10 times. Canceling the Magnified Display 1 Press the zoom lever toward . Movie frames and index playback images cannot be magnified.
Viewing Images in Sets of Nine (Index Playback) Up to nine images can be viewed at once in index playback. 1 Slide the mode switch to . 2 Press the zoom lever toward . Selected Image Movie Frame Nine images appear at once (index playback). the image selection using the left, 3 Change right, up or down button. The up button operation in this row displays the previous set of nine images. The down button operation in this row displays the next set of nine images. 4 Press the zoom lever toward .
Jumping Between Images The display can be advanced or set back 9 images when in index playback. the zoom lever once toward 1 inPress index playback (p. 124). while 2 Change the displayed images. Playback, Erasing • Jump 9 images back or forward using the left and right buttons. • Holding down the button and pressing the left or right button jumps to the first set or the last set of 9 images. Jump bar 3 Press the zoom lever toward . • The jump bar disappears and the camera returns to index playback.
Viewing Movies You can playback the images shot in mode. 1 Slide the mode switch to . Movies cannot be viewed in index playback. a movie using the left or right 2 Select button and press the button. • A movie displays with the icon on it. • The movie playback panel appears. Select (Play) using the left or right 3 button and press the button. Movie playback panel Volume • The movie and sound will play. • You can adjust the volume using the up or down button.
Pausing and Resuming Play button to pause the movie. Press it again to Press the resume. Fast Forwarding/Rewinding Select one of the following operations using the left or right button and press the button.
Editing Movies You can delete unwanted portions from the first or second half of a movie clip. the movie you wish to edit and 1 Select press the button. See Viewing Movies (p. 126). Select (Edit) using the left or right 2 button and press the button. The movie editing panel and the movie editing bar appear. an editing method using the up or 3 Select down button.
Select (Play) using the up or down 5 button and press the button. • The temporarily edited movie will start playing. • The movie will stop if you press the button while it is playing. Select (Save) using the up or down 6 button and press the button. When is selected, the edited movie is not saved and the camera reverts to playback. 129 Playback, Erasing the range you wish to edit using the 4 Select left or right button.
[Overwrite] or [New File] using the 7 Select left or right button and press the button. • [Overwrite] : Saves the edited movie under the same file name as the original movie. The original data is deleted. • [New File] : Saves the edited movie under a new file name. The original data is not deleted. • When there is not enough space left on the CF card, only the overwrite function is available. • Protected movies cannot be edited. • It may take approximately 3 minutes to save an edited movie.
Rotating Images in the Display 0° (Original) 1 In the [ 90° 270° (Play)] menu, select (Rotate). See Selecting Menus and Settings (p. 47). an image you want to rotate using 2 Select the left or right button and press the button. The image cycles to the next orientation (90° ➝ 270° ➝ button is pressed. original) each time the 3 Press the button. The Play menu appears again. Press the again to close the menu. button • Movie images cannot be rotated.
Attaching Sound Memos to Images In playback mode (including single image playback, index playback and magnifying playback) you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. In the [ 1 Memo). (Play)] menu, Select (Sound See Selecting Menus and Settings (p. 47). appears. the image to which you wish to add 2 Select a sound memo using the left or right button, then press the button. Sound memo panel The sound memo panel appears.
• The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera. • To stop recording, press the button. To restart button again. recording press the • You can add as many sound memos as you like until their total time for one image reaches 60 seconds. • Select (Play) in step 2 on the previous page. Images mark (simple with sound memos are displayed with the display or detailed display). • To stop playback, press the button. To resume button again.
Auto Play Use this feature to automatically play back all of the images in the CF card (Auto Play). The LCD monitor displays each image for approximately 3 seconds. the [ 1 InPlay). (Play)] menu, select (Auto • See Selecting Menus and Settings (p. 47). • Once you have selected it, Auto Play starts. • As with the single image display mode, pressing the left or right button during auto play will advance through the images more rapidly.
Protecting Images You can protect important images from accidental erasure. 1 In the [ (Play)] menu, select (Protect). See Selecting Menus and Settings (p. 47). an image you want to protect using 2 Select the left or right button and press the Protected Icon • The icon appears on protected images. • To remove the protection, press the button again (in protection mode). • You can make the selection of images easier by toggling between single playback and index playback. (p. 124) 3 Press the button.
Erasing Please note that erased images cannot be recovered. Exercise caution before erasing a file. Erasing Images Individually the image you wish to erase using 1 Select the left or right button and press the button. A confirmation screen appears. [Erase] using the left or right button 2 Select and press the button. To cancel instead of erasing, select [Cancel] and press the button. Protected images cannot be erased with the erase function (p. 135).
Erasing All Images In the [ (Play)] menu, select 1 all) and press the button. (Erase [OK] using the left or right button 2 Select and press the button. To cancel instead of erasing, select [Cancel] and press the button. Protected images cannot be erased with the erase function (p. 135). 137 Playback, Erasing A confirmation screen appears.
Formatting a CF Card You should always format a new CF card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a CF card erases all data, including protected images and other file types. Please check the contents of the CF card before formatting it. the [ (Set up)] menu, select 1 In(Format) and press the button. [OK] using the left or right button 2 Select and press the button. • To cancel formatting instead, select [Cancel] and press the button.
Playback, Erasing • If the camera does not work properly, the inserted CF card may be malfunctioning. Reformatting the CF card may solve the problem. • When a non-Canon brand CF card is malfunctioning, reformatting it may solve the problem. • CF cards formatted in another camera, computer or peripheral device may not operate correctly. When that happens, reformat the CF card with this camera. If formatting in the camera does not work properly, turn the camera off and remove the CF card. Then try again.
Print Settings About Printing You can easily print images stored in the CF card by connecting the camera to a direct print compatible printer*1 with a cable and operating the camera buttons. In addition, you can specify the images on your CF card you want to print and how many copies you want (DPOF*2 Print Settings), and then take the CF card to a participating photo lab to have them printed out later. *1 *2 The direct print icon appears for Canon Direct Print compatible CP series printers.
Please refer to the System Map supplied with your camera for direct print compatible printer (CP series or Bubble Jet printers) information. Print for Direct Print Compatible Printing ➡ Print Settings, Transferring • Connect the camera to the printer • Set various print settings (except DPOF print settings) • Print For printing instructions, see the Direct Print User Guide. DPOF Print Settings • Select the image you want to print (p. 142) ➡ ➡ • Select how many copies you want (p.
Print Settings (DPOF Print Settings) You can select images on a CF card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service, or for printing on a Canon Direct Print compatible CP printer or Bubble Jet printer, or on a PictBridge compliant printer. • The mark appears on images that have had print marks set by another DPOF camera.
Single Images • When the print type (p. 145) is set to [Standard] or [Both], select an image using the left or right button. You can set the number of copies (up to 99) to be printed using the up or down button. Number of Copies • When the print type (p. 145) is set to [Index], select an image using the left or right button and mark or remove marks from images using the up or down button. • You can use the same procedures to select images in index playback (three images).
4 Press the button. • Images are printed in order from oldest to newest by the shooting date. • A maximum of 998 images can be marked per CF card. • Press the zoom lever in step 3 to switch between single and 3-image index playback for selecting an image. • When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).
Setting the Print Style The following print settings can be selected. Standard Index Print Type Both Date File No. Prints one image per page Prints index prints (multiple reduced-size images per page) Prints the images in both the standard and index formats Adds the date to the print Adds the file number to the print Print Settings, Transferring In the [ (Play)] menu, select (Print 1 Order) and press the button. See Selecting Menus and Settings (p. 47).
a setting using the left or right 4 Select button. (Print Type) Select [Standard], [Index], or [Both]. (Date) Select [On] or [Off]. (File No.) Select [On] or [Off]. 5 Press the button. The set up menu will close and the Print Order menu will reappear. • When [Print Type] is set to [Index], the [Date] and [File No.] cannot be set to [On]. • If [Print Type] is set to [Both], both [Date] and [File No.] can be set to [On], however, only the file number is printed for the index print.
Resetting the Print Settings All the print settings can be reset to their defaults easily. The print type will be reset to [Standard] and the date and file number options set to [Off]. In the [ (Play)] menu, select (Print 1 Order) and press the button. See Selecting Menus and Settings (p. 47). Print Settings, Transferring [Reset] using the left or right button 2 Select and press the button. [OK] using the left or right button 3 Select and press the button.
Image Transfer Settings (DPOF Transfer Order) You can mark the images you wish to transfer from the camera to a computer. These settings are compatible with DPOF (Digital Print Order Format). The mark will display on images that have had transfer marks set by another DPOF-compliant camera. These settings will be overwritten by any marks set by your camera. Selecting Images for Transferring the [ (Play)] menu, select 1 In(Transfer Order) and press the button. See Selecting Menus and Settings (p. 47).
3 Select images for transferring. Single Images • Select an image using the left or right button and mark or remove marks from images using the up or down button. • You can use the same procedure when you switch to index playback (a set of three images) by pressing the zoom lever toward . 4 Press the Print Settings, Transferring All the Images on a CF Card • Switch to index playback (a set of three images) by pressing the zoom lever toward .
Downloading Images to a Computer Download images taken with the camera to a computer in one of the following ways: • Connect the camera to a computer with the USB cable You can then download images directly from the camera to a computer. • Directly from the CF card Using a laptop computer or a card reader, you can download images directly from the CF card.
the driver and the software 1 Install applications bundled on the Canon Digital Camera Solution Disk. Please see the Software Starter Guide for information on system requirements and installation instructions. the supplied USB interface cable 2 Connect to the computer’s USB port and the camera’s terminal. • You do not need to turn off the computer or camera when making a USB connection. • Please refer to your computer manual for information regarding the location of the USB port.
To disconnect the cable from the camera: Hold the cable connector firmly at both sides and pull it straight out. For information about what to do after making the connection, please see the Software Starter Guide.
Downloading Images without Installing the Software (Windows XP and Mac OS X (10.1 or 10.2) only) If you are using Windows XP or Mac OS X (10.1 or 10.2), you can use the software distributed with these operating systems to download images (JPEG format only) without installing the software bundled on the Canon Digital Camera Solution Disk. This is useful for downloading images to a computer in which the software is not installed.
Downloading Directly from a CF Card the CF card from the camera, and 1 Eject insert it into a CF card reader connected to the computer. • If you are using a PC card reader or a PC card slot, first insert the CF card into a PC card adapter (sold separately). the icon of the drive with the 2 Double-click CF card. Depending on the operating system, a window opens automatically. images from the card into a folder of 3 Copy your choice on the hard disk.
Viewing Images on a TV Set A video-compatible television connected via the supplied AV cable AVC-DC100 can be used to view images as you shoot or play them back. 1 Turn off the camera (p. 31). Turn off the television also. the other ends of the AV cable to the 3 Plug video in and audio in jacks on the TV. Yellow Plug To the Video In Jack Black Plug To the Audio In Jack on the TV and switch it to Video 4 Turn mode. 155 Connecting the AV Cable to the terminal on the 2 Attach camera.
on the camera in Shooting mode or 5 Turn Playback mode (p. 31). • The image will appear on the TV. Shoot or playback images as usual. • If the images are not appearing on the TV when shooting, press the button. • No image will appear on the LCD monitor when the camera is connected to a TV monitor. • The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 175). The default setting will vary between regions. NTSC: Japan, U.S.A., Canada, Taiwan, etc.
Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices. e.g. Start-up image [ ] [ ] [ As default settings, My Camera setting [ fiction theme and My Camera setting [ theme. ] ] has a science ] has an animal Changing My Camera Settings The [ (Rec.)] or [ My Camera Settings 1 Turn on the camera (p. 31). button. 2 Press the (Play)] menu appears.
the [ (My Camera)] menu using 3 Select the left or right button. a menu item using the up or down 4 Select button. setting content using the left or 5 Select right button. 6 Press the button. • Pressing the button closes the menu and makes the settings take effect. • In Shooting mode, the menu can be closed by pressing the shutter button halfway.
My Camera Settings • If you select [Theme] in Step 4, you can select a consistent theme for each of the My Camera settings. • If (Mute) in the [ (Set up)] menu is set to [On], the beep does not sound even if each sound item such as [Start-up Sound], [Operation Sound], [Selftimer Sound] or [Shutter Sound] in the [ (My Camera)] menu is set to [ , , (On)] (p. 172).
Registering My Camera Settings Images recorded onto the CF card and newly recorded sounds can be added as My Camera settings to the [ ] and [ ] menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following menu items can be saved to the camera. • Start-up Image • Start-up Sound • Operation Sound • Selftimer Sound • Shutter Sound Registering CF Card Images and Sounds 1 Turn on the camera (p. 31). 2 Slide the mode switch to .
the [ (My Camera)] menu using 4 Select the left or right button. the menu item you wish to register 5 Select using the up or down button. Select 6 button. or using the left or right 7 Press the My Camera Settings appears. button. An image appears.
[Start-up Image] → Step 8a, 9a [Start-up Sound], [Shutter Sound], [Operation Sound], [Selftimer Sound] → Step 8b, 9b the image you wish to register 8a Select using the left or right button. 9a Press the button. Select (Record) using the left or 8b right button and press the button. • Recording starts. • Recording stops when the set amount of time has passed. Start-up Sound: 1 second, Operation Sound: 0.3 second, Selftimer Sound: 2 seconds, Shutter Sound: 0.3 second.
(Register) using the left or 9b Select right button. [OK] using the left or right button 10 Select and press the button. File Format of My Camera Settings My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as My Camera settings regardless of the below formats.
• Start-up Sound, Operation Sound, Selftimer Sound and Shutter Sound • • • • Recording format Quantization bit Sampling frequency Recording time Start-up Sound Operation Sound Selftimer Sound Shutter Sound WAVE (monaural) 8 bit 11.025 kHz and 8.000 kHz 11.025 kHz 1.0 sec. or less 0.3 sec. or less 2.0 sec. or less 0.3 sec. or less 8.000 kHz 1.3 sec. or less 0.4 sec. or less 2.0 sec. or less 0.4 sec. or less Any file format other than those described above cannot be used with this camera.
List of Menu Options and Messages FUNC. Menu * Default setting Setting Content Reference Page Exposure Compensation Sets the exposure compensation. -2 ... 0* ... +2 99 Flash Output Adjusts the flash output when the mode dial is set to . (1/3 power)* (2/3 power) (Full power) 111 White Balance Sets the white balance. • (Auto)* (Day Light) • (Cloudy) • • (Tungsten) (Fluorescent) • (Fluorescent H) • • (Custom) 102 Drive Mode Sets Continuous shooting settings and the self-timer.
Item/ Menu Screen Setting Content Reference Page ISO Speed Sets the sensitivity at which images are recorded. • AUTO • 50* • 100 • 200 • 400 109 Photo Effect Switches between photo effects. • (Effect Off)* (Vivid) • (Neutral) • • (Low Sharpening) (Sepia) • (B/W) • 107 Light Metering System Switches between light metering modes. (Evaluative)* • (Center Weighted Avg.) • (Spot) • 97 Resolution (Stills) Sets the number of pixels used for images.
* Default setting Item/ Menu Screen Setting Content Reference Page Resolution (Movies) Sets the number of pixels used for movies. • (320 x 240 pixels)* (160 x 120 pixels) • 60 Compression Sets the relative compression ratio used for images. • Superfine Fine* • • Normal 60 Rec. Menu AiAF Setting Content Sets the AiAF to on (the camera automatically selects the AF frame when taking a picture) or off (AF frame is set to the center frame).
Item/ Menu Screen 168 Setting Content Reference Page Red-eye Sets whether or not the red-eye reduction lamp fires. • On* • Off 65 MF-Point Zoom Sets whether or not the focusing point is magnified when using the manual focus. • On* • Off 115 AF-assist Beam Sets the output of the AF-assist beam according to shooting conditions when using the auto focus. • On* • Off 46 Digital Zoom Sets whether or not the digital zoom combines with the optical zoom to zoom images.
* Default setting Item/ Menu Screen Setting Content Reference Page Review Sets the duration images display on the LCD monitor after the shutter button is released. • Off • 2 sec.* to 10 sec. 59 Reverse Disp. Sets whether or not the images are reversed. • On* • Off 35 Save Settings Saves settings selected in the and menus to the or shooting mode shown on the shooting mode dial.
Play Menu * Default setting Item/ Menu Screen 170 Setting Content Reference Page Protect Protects images from accidental erasure. 135 Rotate Rotates images 90 or 270 degrees clockwise in the display. 131 Sound Memo Adds sound memos to images. 132 Erase all Erases all images from a CF card (excluding protected images).
Item/ Menu Screen Setting Content Reference Page Plays images automatically one after the other. 134 Print Order Sets which images and how many copies will be printed on a direct print compatible printer or at a photo lab. 142 Sets in advance the images that will be transferred to a computer by the camera.
Set up Menu Item/ Menu Screen Mute Volume 172 Setting Content Sets whether or not the beep sounds when the shutter button is pressed or when a menu operation is performed. For details, see “How the Mute setting in the [ (Set up)] menu and each sound setting in the [ (My Camera)] menu are related” on page 177. • On • Off * Note that the error warning sound beeps even when the Mute setting is [On].
* Default setting Power Saving Date/Time Setting Content Shutter Volume Adjusts the sound volume when the shutter button is pressed all the way. There is no shutter sound in Movie mode. Playback Vol. Adjusts the sound volume when a movie or a sound memo is played. Sets the Auto Power Down and Display Off settings. Auto Power Down Sets whether or not the camera automatically powers down after a specified period of time elapses without camera operation.
Item/ Menu Screen 174 Setting Content Reference Page Format Formats (initializes) a CF card 138 File No. Reset Sets how file numbers are assigned to images when new CF cards are inserted. • On • Off* 120 Auto Rotate Sets whether or not images shot with the camera held vertically are automatically rotated in the display. • On* • Off 118 Distance Units Sets the format of the MF indicator’s displayed distance units.
* Default setting Language Video System Setting Content Sets the language used in the menus and messages on the LCD monitor. The menu may appear differently in some regions. • English* • Italiano • Deutsch • Norsk • Français • Svenska • Nederlands • Español • Dansk • Chinese • Suomi • Japanese You can change the language during image playback by holding the button and pressing the button. Sets the video output signal standard.
My Camera Menu You can select the theme, start-up image and sound, shutter sound, operation sound and selftimer sound used on this camera. These are called My Camera settings. You can also customize the [ ] and [ ] options for each item with images recorded on the CF card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details.
Setting Content Reference Page Operation Sound Sets the sound when any button other than the shutter button is pressed.*1 • (Off) * • • • 157 Selftimer Sound Sets the sound informing you that the photo will be taken in 2 seconds.*1 • (Off) * • • • 157 Shutter Sound Sets the shutter sound when the shutter button is pressed all the way. There is no shutter sound in Movie mode.
Resetting the Settings to Default You can reset all the menu and button operation settings to their defaults. 1 Turn on the camera. The mode dial can be turned to any setting. the 2 Press 5 seconds. button for longer than The message “Reset settings to default?” appears on the LCD monitor. [OK] using the left and right 3 Select buttons, then press the button. • The screen below appears while resetting. The normal screen resumes when resetting is complete.
Menu and Message Lists • Following data do not reset to default. - Date/Time, Language, and Video system set in the [ (Set up)] menu (p. 173, 175) - The custom white balance (p. 104) - Newly registered My Camera settings (p. 160) • When the camera is connected to a computer or a printer, this operation does not work.
List of Messages The following messages may appear on the LCD monitor. For messages that may appear when the camera is connected to a printer, see the Direct Print User Guide. Busy...: Image is being recorded to, or read from, CF card. Resetting settings to default. No Memory card: You attempted to shoot or playback images without a CF card installed. Cannot record!: You attempted to shoot an image without a CF card installed. Memory card error: CF card has experienced an anomaly.
181 Menu and Message Lists Corrupted data: You attempted to playback an image with corrupted data. RAW: You attempted to playback an image recorded in an incompatible RAW format. Unidentified Image: You attempted to playback an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, or a movie that was taken with another camera.).
Appendix Using the Battery Kits (Sold Separately) Using Rechargeable Batteries (Battery and Charger Kit CBK100) Included are the battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below. Indicator To a power outlet • The indicator blinks while charging, then remains lit when charging is finished. • This charger can be used only to charge Canon AA-size NiMH batteries. Please do not attempt to charge any other type of batteries with this charger.
183 Appendix • Repeatedly recharging batteries before they become fully depleted may cause batteries to lose capacity. Do not recharge the batteries until the LCD monitor displays the “Change the batteries” message.
• It takes approximately 220 minutes for the charger to fully recharge the batteries (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to 95 °F). • Charging time varies according to ambient temperature and to the batteries’ initial charge state.
the terminal cover, and 2 Open connect the adapter’s DC plug into the camera’s DC IN terminal. Appendix Please unplug the adapter from the power outlet when you have finished using the camera. Please do not attempt to use any AC adapter other than AC Adapter Kit ACK600 with your camera. Use of a different adapter may result in damage to the camera or to the adapter.
Using the Lenses and Lens Adapter (Sold Separately) The camera supports use of the separately sold Wide Converter WC-DC52A, Tele-converter TC-DC52 and Close-up Lens 250D (52 mm). In order to attach any of these lenses, you also need to use the separately sold Conversion Lens Adapter LA-DC52D. • When attaching the wide converter, tele-converter or close-up lens, be sure to screw it on securely. If they come loose they may fall from the lens adapter, posing risk of injury from shattered glass.
Wide Converter WC-DC52 Use this converter for taking wide-angle shots. The wide converter changes the focal length of the camera body’s lens by a factor of 0.7 (The thread diameter is 52 mm.). Tele-converter TC-DC52A This 52 mm-threaded diameter magnifying conversion lens is for taking telephoto shots. The lens changes the focal length of the camera body’s lens by a factor of 1.75x. Appendix Close-Up Lens 250D (52 mm) This lens makes it easy to take macro shots.
It is not possible to attach a lens hood or filter to the wide converter or tele-converter. Shooting Ranges in Macro Mode Telephoto end Wide-angle end Distance between Front of Lens and Subject 8 cm (3.1 in.) 11 cm (4.3 in.) 4 cm (1.6 in.) 16 cm (6.3 in.) Field Coverage 45 (1.8 55 (2.2 48 (1.9 148 (5.8 × × × × × × × × 34 mm 1.3 in.) 41 mm 1.6 in.) 36 mm 1.4 in.) 111 mm 4.4 in.
the ring release button and hold it 2 Press down, and turn the ring in the direction of the arrow. 2 1 Ring Ring Release Button the marks on the ring and the 3 When mark on the camera are aligned, lift off the ● ring. the marks on the Conversion Lens 4 Align Adapter and the mark on the camera, ● ● Appendix and turn the adapter in the direction of the arrows as far as the mark on the camera.
the lens on the adapter, and attach it 5 Set securely by turning it in the indicated direction. • Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains. • Exercise due caution when handling the lenses since it is easy to dirty them with finger prints. • Be careful not to drop the camera or adapter when removing the ring. • When shooting with these attachments, please use the LCD monitor to compose your shots.
Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Appendix Camera Body Wipe the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. • Never use synthetic cleansers on the camera body or lens.
Troubleshooting Problem Camera will not operate Cause Solution Power is not turned on Press the ON/OFF button for a few moments. Confirm that the CF card slot cover or battery cover is securely closed. Reload the batteries in the correct direction. • Replace with unused alkaline or fully recharged batteries (four AA-size batteries.) • Use an AC adapter. Use only unused AAsize alkaline batteries or Canon AA-size NiMH batteries. (For information about alkaline batteries, see Proper Battery Handling (p.
Cause Flash is charging CF card full CF card not formatted correctly Lens will not retract Battery cover or CF card slot cover opened with camera on CF card slot cover or battery cover opened while camera was recording to CF card (warning signal) Solution Wait until the orange indicator stops blinking and lights steadily, signaling that the flash is charged, then press the shutter button. • Insert a new CF card.
Problem Battery pack consumed quickly Cause Solution Use only unused AAsize alkaline batteries or Canon AA-size NiMH batteries. (For information about alkaline batteries, see Proper Battery Handling (p. 21)) The batteries are cold. Battery performance deteriorates at low temperatures. If shooting in a cold area, keep the batteries warm (by placing them in an inner pocket, etc.) until ready to use them. Wipe them well with a Battery terminals are dry cloth before use. dirty.
Cause Battery terminals are dirty. Battery life exceeded. Shots are blurry or unfocused. The camera was moving when you took the shot. Autofocus function hampered by obstruction to AFassist beam. The AF-assist beam has been set to [Off] through the menu. Solution • Be sure to set batteries firmly into the charger. • Be sure that the power cord is firmly connected to the charger, and is firmly plugged in to the power outlet. Wipe them well with a dry cloth before charging.
Problem Shots are blurry or unfocused. Cause Solution • Ensure that there is at least 45 cm (1.5 ft.) between the camera lens and subject. • Use the macro mode to shoot close-ups between 5 to 45 cm (2.0 in. to 1.5 ft.) from the lens when set to wide angle and between 25 to 45 cm (10 in. to 1.5 ft.) when set to telephoto. Subject is hard to focus Use the focus lock or the manual focus to on. shoot the image. See Shooting Problem Subjects for the Autofocus (p.
Cause A purple-red or other color vertical stripe appears on the upper part of the LCD monitor The subject is brighter than the surroundings. Light is shining or reflecting into the camera. The flash mode is set so that the flash always fires. Subject is too bright Solution When flash is used, the distance between lens and subject should be no less than 25 cm (10 in.). Set exposure compensation to a negative value. Adjust the camera angle. Set the flash to any other mode except On.
Problem Cause Solution White dots or white asterisks appear on the image Light from the flash has reflected off dust particles or insects in the air. This occurs more frequently in the following conditions: - When shooting at the wide-angle end. - When shooting with a high aperture value in the aperture-priority AE mode. The flash mode is set to Off. Incorrect video system setting. This is a phenomenon that occurs with digital cameras and does not constitute a malfunction. The flash doesn’t fire.
Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot A80 Camera Effective Pixels Approx. 4 million 1/1.8-inch CCD (Total number of pixels: Approx. Image Sensor 4.1 million) Lens 7.8 (W) – 23.4 (T) mm (35mm film equivalent: 38 (W) – 114 (T) mm) f/2.8 (W) – 4.9 (T) Optical Viewfinder Approx. 3.6x (Up to approx. 11x in combination with the optical zoom) Real-image zoom viewfinder LCD Monitor 1.5-inch, amorphous silicon TFT color LCD, approx.
White Balance TTL auto white balance, pre-set white balance (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom white balance Built-in Flash Auto*, on*, off * Red-eye reduction is available. Flash Range Normal: 45 cm – 4.4 m (1.5 – 14.4 ft.) (W), 45 cm – 2.5 m (1.5 – 8.2 ft.) (T) Macro: 25 cm – 45 cm (9.8 in. – 1.5 ft.) (W/T) (When sensitivity is set to AUTO.
Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 10x (max.) in LCD Playback Modes monitor), Sound memos (up to 60 sec.), Auto play or image output to direct print compatible CP-series (CP300/CP-200/CP-100/CP-10) and Bubble Jet printers.
Battery Performance Number of Shots LCD Monitor ON LCD Monitor OFF AA Alkaline Batteries (included with the camera) AA NiMH Battery NB-1AH Playback Time Approx. 250 shots Approx. 800 shots Approx. 280 min. Approx. 350 shots Approx. 1000 shots Approx. 280 min. * The data above reflects standard Canon testing conditions. The actual figures will vary according to the shooting conditions and settings.
CF Cards and Estimated Capacities (Recordable Images) L M1 M2 S Movie (in seconds) FC-16M 7 13 26 14 26 52 25 46 84 58 94 165 44 118 FC-32M 14 27 54 30 54 108 53 94 174 120 196 337 91 242 FC-64M FC-128M FC-256MH 30 61 123 54 110 222 110 220 443 61 122 246 109 219 440 217 435 868 107 215 431 189 379 762 349 700 1390 241 482 962 393 788 1563 676 1355 2720 183 368 735 486 973 1954 • The maximum recording time for a movie clip is approx. 3 minutes.
NiMH Battery NB-1AH Supplied with the separately sold NiMH Battery NB4-100 set and the Battery/Charger Kit CBK100. Type Nominal Voltage Typical Capacity Cycle Life Operating Temperature Dimensions Weight Rechargeable nickel metal hydride battery 1.2 V DC 1600 mAh (Lowest : 1550 mAh) Approx. 300 times 0 – 35 °C (32 – 95 °F) Diameter: 14.5 mm (0.6 in.) Length: 50 mm (2 in.) Approx. 27 g (0.95 oz.) Battery Charger CB-3AH Supplied with the separately sold Battery and Charger Kit CBK100.
CompactFlash™ Card Card Slot Type Dimensions Weight Type I 36.4 × 42.8 × 3.3 mm (1.4 × 1.7 × 0.1 in.) Approx. 10 g (0.4 oz.) Wide Converter WC-DC52 (sold separately) Magnification Focusing Range (from tip of lens) Thread Diameter Dimensions Weight Approx. 0.7× (35mm film equivalent at wide angle end: approx. 26.6 mm) Approx. 0.5 cm (0.2 in.
Close-Up Lens 250D 52mm (sold separately) Focal Length Focusing Range Thread Diameter Dimensions Weight 250 mm 4 – 25 cm (1.6 – 9.8 in.) (W)/8 – 25 cm (3.2 – 9.8 in.) (T) (when mounted on PowerShot A80) 52 mm standard filter thread (Conversion Lens Adapter LA-DC52D is required for mounting to PowerShot A80) Diameter: 54 mm (2.1 in. ) Length: 10.2 mm (0.4 in.) Approx. 55 g (1.9 oz.
207 Appendix
Index A AC Adapter Kit 184 AF Frame Auto Selection 96 Manual Selection 96 Aperture-Priority AE ( ) 91 Aperture Value 88, 91, 94 Auto Mode ( ) 56 Auto Play 134 Auto Rotate 118 A/V Out Terminal 155 B Batteries Battery Cover 17 Change 20 Handling Precautions 21 Installing 20 Low Status 23 Performance 202 Rechargeable Batteries 182 Status 23 Beep 172, 173, 177 Black and White Mode 107 C Care 191 CF Card 24 CF Card Reader 154 Downloading Images 150 Formatting 138 Handling 25 Installing 24 Recording Capacity 20
J Rec 167 Selecting 47 Set up 172 Messages 180 Microphone 16 Movie ( ) Editing 128 Playback 126 Shooting 76 My Camera Menu 176 Registering 160 Settings 157 L Night Scene Mode ( ) H Household Power Source 182 I Image Zone 19 Index Playback 124 Indicators 18 Information View 36 - 41 Interface Cables 16, 155 ISO Speed 109 Jump 125 N Landscape Mode ( ) 68 Language 29, 175 LCD Monitor 34 - 41 Lens 16 Close-up Lens 187 Conversion Lens Adapter Tele-converter 187 Wide Converter 187 Light Metering Center-W
Resetting 147 Power On/Off 31 - 32 Power Saving 32, 173 Power Source AC Adapter 184 Rechargeable Batteries 182 R Recordable Images 203 Red-Eye Reduction 65 Remaining Movie Time 203 Resolution 60 Resetting the settings to default 178 Ring Release Button 16, 189 Rotate 131 Spot Light Metering 97 Start-up Image 31, 157 - 159, 176 Sound 31, 157 - 159, 176 Stitch Assist Mode ( ) 72 Framing Subjects 72 Shooting 73 Strap 17 T Telephoto 43 Transfer Order Reset 148 Selecting Images 148 Troubleshooting 192 - 198
FCC Notice (Digital Camera, Model PC1059) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Functions Available in Each Shooting Mode This chart shows the functions available in each shooting mode. In the and modes, shooting can be done with registered settings (p. 116). Large L Medium 1 M1 Resolution Medium 2 M2 Small S Movie Resolution Movie Superfine Compression Fine Normal Auto Flash On Off Red-Eye Reduction Flash Output AF-assist Beam Single Shot Continuous Mode Drive Mode Fast Continuous Mode Self-timer (10 sec.) Self-timer (2 sec.
Reference Page ●* ● ● ● – – ● ●* ● ● ● ●* ● – ● ●* ● ● ● ● ● ● ● ▲* ▲ ▲ ▲ – – ▲ ▲* ▲ – ▲ ▲* ▲ – ▲ ▲* – – ▲ ▲ – – ▲ – – – – ●* ● – – – – – – – – ● ●* – – ● ● – ● ● ●* ● ● ● – – ● ●* ● ● ● ●* ● – ● ●* ● ● ● ● ● ● ● ●* ● ● ● – – ● ●* ● – ● ●* ● – ● ●* ● ● ● ● ● ● ● ●* ● ● ● – – ● ●* ● – ● ●* ● – ● ●* ● ● ● ● ● ● ● ●* ● ● ● – – ● ●* ● – ● ●* ● ● ● ●* ● ● ● ● ● ● ● 60 60 64 65 111 46 – 84 80 96 114 78 213
Digital Zoom On Off Exposure Compensation Evaluative Metering Light Metering Center-Weighted Averaging System Spot Metering White Balance (1) Photo Effect ISO Speed On Auto Rotate Off ● ●* – ● – – –(2) – –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● ● ●* ● ● – – ● ● –(3) ● ● * : Default, ● : Available, ▲ : Available, but cannot be changed after taking the first shot, – : Not available : Setting is retained even after power off.