User guide

156
5
Turn on the camera in Shooting mode or
Playback mode (p. 31).
• The image will appear on the TV. Shoot or playback
images as usual.
• If the images are not appearing on the TV when shooting,
press the button.
• No image will appear on the LCD monitor when the
camera is connected to a TV monitor.
• The video output signal can be switched (NTSC or PAL)
to accommodate different regional standards (p. 175).
The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will
not display properly.
• If the TV is a stereo model, you can plug the audio plug
into either the left or right Audio In jack. Please refer to
the TV’s manual for details.
•A TV set cannot be used in mode.