Operation Manual

Chapter 8 Receiving Faxes 8-3
Receiving Faxes
Receiving Faxes Automatically: FAX ONLY MODE
If you have a separate telephone line for your unit, set FAX ONLY MODE for the unit to
answer all calls as fax calls.
Setting FAX ONLY MODE
Your unit is factory-set to FAX ONLY MODE. If you have not changed the receive mode to
Fax/Tel Mode, simply follow this procedure:
1 Press Receive Mode to select FAX ONLY
MODE.
• After a few seconds, the LCD changes to this
display:
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow this
procedure to set this mode:
1 Press Function.
2 Press Data Registration.
3 Press Set.
4 Use d or u to select RX SETTINGS.
5 Press Set.
6 Use d or u to select RX MODE.
7 Press Set.
8 Use d or u to select FAX ONLY MODE.
9 Press Set.
Ex:
Ex:
FAX ONLY MODE
15:00 FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING