Operation Manual

13-12 Troubleshooting Chapter 13
Message Error Code Cause Action
TRY AGAIN IN B&W
(TRY AGAIN IN B/W)
#085 You tried sending a
colour document to a
machine that does not
support colour faxing.
Try sending again in black &
white (→ p. 7-3).
For the MultiPASS C75/ FAX-
B215C, you can enable the
COLOUR DIRECT TX setting
that converts colour faxes to
black & white if the other
party's fax machine does not
support colour faxing, thus
enabling you to send colour
documents to any fax
machine without an error
occurring. (→ p. 14-6)
TX/RX CANCELLED
—
You pressed Stop to
cancel the transmission.
If required, try sending again.
TX/RX NO. nnnn
— When the unit sends or
receives a fax, it assigns
it a unique identification
number (
nnnn ).
Write the number down if you
will need it later.
TX/RX NO. nnnn
SCANNING P.nnn
MEMORY FULL
(Three messages toggle.)
— The unit is sending a
document and its
memory is full.
The unit continues to send
the document as memory
becomes available.
WAIT COOLING
— During printing, the BJ
cartridge print head may
have become too hot.
Allow the unit to cool down.
The unit will resume printing
when it has cooled down.