Owner manual

Settings
RX SETTINGS
Factory sellings are in bold. For instructions on how to change a setting, refer to Flow to ehange a setting.pgs.8.v86.
Name Description
Settings
ECM RX
Enable/disable error correction during reception.
ON/OFF
FAX/TEL SWITCH Enable/disable FAX/TEL switchover. When ON, this feature
answers calls, and if no fax tone is detected, the FAXPHONE
rings to alert you of an incoming calf
ON/OFF
RING START TIME
Set the duration that the FAXPHONE listens for a fax tone before
starting to ring.
8 seconds(0 to 30)
F/T RING TIME
Set the length of time the FAXPHONE will ring to alert you of an
incoming call.
15seconds|10to 45)
F/T SW ACTION Select the action taken after the F/T RING TIME expires.
DISCONNECT/RECEIVE
INCOMING RING
When the FAXPHONE is set for automatic receiving, set the
FAXPHONE to ring when it receives a calf
ON/OFF
RING COUNT
Set the number of incoming rings before the FAXPHONE
answers.
2 times) 1 to 99)
ANS/FAX SWITCH
Enable/disable whether the EAXPHONE automatically switches
to receive mode If a period of silence is detected after
answering the call.
ON/OFF
ANS/FAX SW TIME
Set the duration of silence the FAXPHONE listens for to
determine if a fax is coming in.
4 seconds! 1 to 60)
MAN/AUTO SWITCH
Determine if the FAXPHONE switches to document receive
mode after the FAXPHONE rings for a specified time when the
FAXPHONE is in the manual receive mode.
ON/OFF
RING TIME
Set the amount of time the FAXPHONE will ring before
switching to document receive mode.
10 secondsll to 99)
REMOTE RX
Allow you to dial a number code on the remote extension to
start receiving a document.
ON/OFF
REMOTE RX ID
If you set REMOTE RX ON, you can change the remote receiving
ID,
25 (00 to 99, * and #
included)
MEMORY RX
Turn on/oft memory receiving of a document.
ON/OFF
RX PAGE FOOTER
Set the F/AXPHONE to print the time a document is received, the
transaction number, page numbers, and other useful information.
If you set RX PAGE FOOTER ON, SELECT REDUCE % setting in
RX REDUCTION is set to 90% automatically.
ON/OFF
DRPD
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
Enable/disable the Dustinctive Ring Pattern Detection (DRPD)
feature and assign a setting mode to each ring pattern.
See pg.21.
ON/OFF
TEL-FAX-FAX/TEL SWITCH
TEL FAX FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
|g
oo
3]
S
89