Owner manual

Assembling the FAXPHONE

■ Paper Tray

Make sure the paper lever is in the position

shown. Then, place the paper tray into the

FAXPHONE, making sure the two knohs fit in

the appropriate slots in the FAXPHONE.

This symbol indicates the use of a function

(envelope printing) that is not available with this

model.

■ Paper Tray Cover

Place the paper tray cover over the paper tray,

making sure the two tabs fit in the appropriate

slots in the FAXPHONE.

Fit the 4 tabs of the faceplate into the correspond

ing slots around the One-touch button area.

Connecting the AC power cord

Plug the FAXPHONE into a 120 volt AC 60 Hz three-w'ire grounded outlet

Plug the powei

rear of the unit.

y Plug the power cord connector into the

Plug the other end of the power cord into

a properly grounded AC outlet (three-

prong outlet).

There is no power switch on the FAXPHONE.

The power is on as long as the FAXPHONE is

plugged in.