Owner manual

Loading the paper
Selecting the right kind of paper
The quality of the paper you use affects the print quality of the FAXPHONE. Using
paper that meets the following specifications will ensure the best possible printing
results.
Quality Use plain bond, typewriter quality without curls, folds, or rough edges.
Weight 17-24 lbs (64 g/m- - 90 g/m’)
Thickness 0.003"- 0.005" (0.08 mm - 0.12 mm)
Storage
64°F to 75=F (I8=C to 24°C) 407/ to 6097 relative humidity.
Si/e Letter. A4. Legal
Test the plain bond paper you intend to use first to make sure printing
results are satisfactory.
Do not use punched or colored paper.
Do not use glossy paper.
Ink drying time will vary depending on the type of paper.
Using other than the above paper may cause jamming and/or blurred
print.
■ Setting the paper size
The paper si/.e setting determines the size of the recording paper in the paper tray. The
factory setting is letter size. If you want to use a paper size other than letter, you
must change the PAPER SIZE setting. See EAX PRINTER, pg.90.
Loading the paper
y Remove the paper tray cover.
Fan a small stack of up to 100 sheets (up
to 0.4" (10 mm) thick). Tap the edge of the
stack on a flat surface to even the stack.