Owner manual

Sequential broadcasting

Sending a document to more than one location

Sequential hroacleasting sends one document to more than one location.

It' >(iu often send to the same group of destinations, sec Registering Group Dialing

numbers and names, pg.42 to register the fax numbers for the group.

You can send to a total of 71 destinations as follows:

One-touch Speed Dialing = 20 destinations

Coded Speed Dialing = .SO destinations

Rcsular dialinc (Numeric buttons dialing) = I destination

Group Dialing

69 destinations

You can enter the One-touch Speed Dialing and Coded Speed Dialing destinations in

any order. You simply press the One-touch Speed Dialing button, or press (CODED

DIAL/DIRECTORY] followed by the two-digit code (on the numeric buttons pad).

You can also include one destination using Regular dialing. Remember that when

using regular dialing, you must press [START/COPY] after entering the number.

You can send up to I.S lelter-si/e pages (based on the CCITT#I Chart-standard resolu

tion).

7 Feed the document face-down into the Automatic

Document Feeder (ADF).

See Loading the document, pg.49.

DOCUMENT READY

Dial the other party's fax number.

I You can send to up to 71 destinations.

I Simply enter the numbers one after the other:

press the desired One-touch Speed Dialing button

or press (CODED DIAL/DIRECTORY] followed

by the two-digit code (on (he numeric buttons pad).

I You can enter only one number directly from the

numeric buttons pad using regular dialing. Re

member to press [START/COPY] after entering the

number.

I You must press each button within 10 seconds of

the preceding one. The FAXPHONE begins the

operation approximately 10 seconds after you press

the last button.

TEL= 3456 7890

Press [START/COPY],

I The FAXPHONE reads the document into memory

and begins sending. Between transmissions.

MULTI TRANS ON displays on the LCD.

I fo cancel a transmission, press |STOP| during the

dialing or transmission. All transmissions in the

sequence are cancelled.

START/COPY

TX/RX NO. XXXX

MEMORY INPUT P01