Owner manual

Using the FAXPHONE as a telephone

Making telephone calls

_________________

You can use your t-AXPHONE as a telephone and dial manually or use any of the

registered One-touch and Coded Speed Dial numbers.

Dialing

Pick up the handset or press [ON HOOK],

Dial the telephone number using the numeric buttons.

To dial using One-touch or Coded Speed Dialing, pick up the handset or press

|ON HOOK], and press the desired One-touch buttons or press (CODED DIAL

/DIRECTORY] and the 2-digit code. Directory Dialing is also available (see

Directory Dialing pg.38).

Tor the FAXPTIONE B.S40. pick up the handset of the connected extension

phone.

Hold function

and place the handset on the

To place the other party on hold, press

cradle.

To resutne the call, pick up the handset.

\ou can leave the party on hold for approximately six minutes, after

which the FA.XPHONE automatically hangs up.

Receiving a document manually using the exten

sion phone_____________________________

_______

If your extetision phone is connected to the FAXPHONE but is not located near the

unit, you can actix ate reception of a docutnent manually by answering the extension

phone without physically touching the FAXPHONE.

Tor this feature, extension phone must be plugged into the telephone jack of the

TAXPHONE. .See Connecting an extension phone or answering machine, pg. 1-2.

When you answer a call using your extension and

you hear a long beep or silence, a fax is being

sent.

Press 25 (factory preset) on your extension phone

to switch the fax to receive mode. Wait for a high

pitch tone and then hang up.

The twai-digit number is preset at the factory to 25.

You can change the tw o digit number. See REMOTE

RX ID in the RX SETTINGS, pg.89.