Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
1-4
Making connections
Connecting the telephone line, handset, and
external devices _______________________________
There are three jacks on the back of the fax for connection of the following:
Be sure to connect any external devices before using the fax.
* FAX-B820/B822 only.
1
Connect the supplied telephone line cord to the jack, then the other end to the
telephone line jack on your wall.
2
Connect the handset to the jack, and place it in its cradle.
Handset
Extension phone (a telephone that
you may wish to have placed away
from the fax to use at a different
location) or answering machine*.
Telephone line
2
3
1