Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
2-16
Modifying voice tags ___________________________
Deleting voice tags ____________________________
1
Perform steps 1 to 4 on p. 2-15.
2
If a voice tag is already registered under the speed dialing number, the fax asks you if you
want to modify the voice tag.
Press [ ] to select YES.
3
Use [ ] or [ ] to select REDO VOICE TAG.
Press [Start/Copy].
The fax asks you to confirm that you want to redo the voice tag registration.
4
Press [ ] to select YES and proceed to step 6 on p. 2-15.
Press [#] to cancel the procedure.
1
Perform steps 1 and 2 on Modifying voice tags above.
2
Use [ ] or [ ] to select DELETE VOICE TAG.
Press [Start/Copy].
The fax asks you to confirm that you want to delete the voice tag.
3
Press [ ] to select YES to delete the voice tag.
Press [#] to cancel the procedure.