Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
9-4
Testing and cleaning the BJ cartridge print
head ____________________________________________
The print head in the BJ cartridge contains nozzles through which ink is propelled onto the
paper. To maintain the best possible print quality, these nozzles need to be cleaned from time to
time. Your fax is equipped with a print head cleaning function that does this.
■ Printing the nozzle check pattern
Before cleaning the print head, you may want to print the nozzle check pattern to test the print
head of the BJ cartridge installed in the fax. This test shows if each print head nozzle is
operating properly.
1
Press [Function].
Press [Cleaning].
2
Use [ ] or [ ] to select NOZZLE CHECK.
Press [Start/Copy].
The fax prints the nozzle check pattern.
Print the nozzle check pattern again after cleaning the BJ cartridge print head to check if cleaning
corrected the problem.
Nozzle check pattern
If the pattern is broken
or missing, clean the
BJ cartridge print head
(see p. 9-5).