Operation Manual

1-10
Testing the fax _________________________________
After you have assembled the fax, loaded the paper, and installed the BJ Cartridge
®
, you can
make sure the fax is printing properly by making several copies of a document (see p. 4-1).
If you have problems printing, see Chapter 9.
6
Align the slot in the cartridge with the yellow post in the fax, and with the label facing
outwards, insert the BJ Cartridge
®
into the cartridge holder. Lower the cartridge lock
lever until you hear a click to lock the cartridge in place.
The yellow post (BJ Cartridge
®
guide) should be visible through the slot. The BJ Cartridge
®
tilts
slightly to the left before lowering the cartridge lock lever.
7
Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page every time you insert a BJ Cartridge
®
.
You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM
SETTINGS, p. 8-5.
• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.
Ribbon
cable
Guide rail
Round shaft Circuit board