Operation Manual

Part 3: Operation
BJC-3000
3-2
1.1.1 Status indications by the LED
Status indications by the LED are described below.
Indicator Status Status
Green (lit) Powered-on
Green (blinking) Power-on in progress, power-off in progress, resetting,
cleaning, test printout in progress, front cover open, printout
in progress.
Light off Powered-off
Errors:
Recoverable by Users
The indicator blinks in orange the number of times that corresponds to the error type,
followed by an extended blink in green. This procedure is repeated.
Unrecoverable by Users
The indicator blinks alternately in orange and in green the number of times that
corresponds to the error type, followed by an extended blink in green. This procedure
is repeated.
TABLE 3-1 STATUS INDICATIONS BY THE LED
Error Conditions Indicator Blinks Error Codes* Reference Pages
[Recoverable by Users]
Paper feed error 2 times in orange ... Page 4-12
Paper jam error 3 times in orange ... Page 4-12
Ink out error 4 times in orange ... Page 4-14
Mis-installed Cartridge error 5 times in orange ... Page 4-15
No cartridge error 6 times in orange ... Page 4-15
Cartridge error 7 times in orange ... Page 4-15
Waste ink warning** 8 times in orange ... Page 4-5
[Unrecoverable by Users]
ROM error 1 time in orange/green ... Page 4-5
RAM error 2 times in orange/green ... Page 4-5
EEPROM error 3 times in orange/green 6800 Page 4-5
Home position error 4 times in orange/green 5100 Page 4-6
Temperature sensor error 5 times in orange/green 5400 Page 4-5
Waste ink full error 6 times in orange/green 5B00 Page 4-5
Head temperature error 7 times in orange/green 5200 Page 4-9
Head temperature sensor error 8 times in orange/green 5200 Page 4-9
Cartridge displaced error 9 times in orange/green 5600 Page 4-10
ASF sensor error 10 times in orange/green 5700 Page 4-11
[Internal Error]
Ink sensor error*** None ... Page 4-16
* : Error codes are displayed on the computer. When the printer is connected to iMac or
Power Macintosh G3, "D" or "M" is prefixed to an error code.
** : Waste ink warning can be canceled by pressing the RESUME button.
*** : Internal errors are not displayed. Errors can be confirmed with Part 3: 2.3 EEPROM
Information Print . (Page 3-10).