Operation Manual

2.2 Service/Factory Test Print
In the service/factory test print, the control ROM version, model setting, total number
of pages passed with each cartridge, and total amount of waste ink are indicated in the
header.
* : USB Serial Number
A USB serial number will be assigned, in conformance with USB standards, so that
each printer can be identified when multiple printers are connected to a host
computer via USB interface.
A unique value is recorded in the EEPROM when the control board is manufactured.
The USB serial number recorded in the EEPROM will not be cleared even when the
EEPROM is reset. Also, it cannot be overwritten with any value.
3-9
BJC-3000
Part 3: Operation
Operation
g
Installed cartridge
Model name
Total number of pages passed with the Color BJ
cartridge
ROM version
Total number of pages passed with the Photo BJ
cartridge
Total waste ink amount (the amount of ink absorbed by
the waste ink absorber in %)
Serial number when using USB*
Not used
Total number of pages passed with the Black BJ
cartridge
Total number of pages
passed with the Scanner
cartridge
ROM Ver VX.XX BJC-3000 Use Head <BC-XX> HeadTemp0=XXX.X HeadTemp1=XXX.X EnvironmentTemp=XXX.X Bk=XXXXX C1=XXXXX Ph=XXXXX Sc=XXXXX ScC1=XXXXX
Factory Area=XX XX XX XX XX XX XX XX LostInkCount =XX.X% Destination =XX USBSerialNo=(XXXXXX)
Figure 3-5 Service/Factory Test Printout (Sample)